The Rebco ROTFWG Plug Choke with Removable Mandrel is a positive blank-off device that seals off pressure from both above and below. It is a Top No-Go device designed to be set in BF Landing Nipples and the upper seal bore of the ROTL Sliding Sleeve. Unlike the ROTFSG-2, which has a selective capability, the ROTFWG is exclusively a Top No-Go device; the No-Go shoulder provides a positive mechanical depth stop that prevents the plug from passing the intended nipple depth below. The plug requires two runs to be set and covers nominal sizes from 2" through 3-1/2", with corresponding seal bore sizes.

Construction is from Alloy material, and the same running and pulling tool family as the ROTFSG-2 applies: ROTC-1 (with Locator Ring) or ROTBG for running; Shear Down SB or JDC, and Shear Up ROTRB or JUC, for retrieval; with ROTA Pulling Probes specified by nominal size. A Redress Kit with V-Packing (6 pieces) is available for all sizes, and pulling tool bore-pass restrictions, similar to those of the ROTFSG-2, must be reviewed before planning retrieval.

How to Order: Product Code 21 or 22. Specify nominal size, seal bore size, Running Tool type, Pulling Tool type, Pulling Probe size, material, and service conditions. Review pulling tool bore-pass restrictions before specifying retrieval tools. Refer to Pages XVI-28 through XVI-32.