Service Tools are engineered for either singular or multi-functional applications in wireline operations. | Wireline , Slickline , and downhole Tools SERVICE TOOLS DOWNLOAD PDF Service Tools

Equalizing Prong ROTPXXN Plug Choke Assembly Plug Assemblies Equalizing Prong ROTPXXN Plug Choke Assembly Equalizing Prong ROTPXXN Plug Choke Assembly Rebco Equalizing Prong ROTPXXN Plug Choke Assembly, when landed in ROTXN Landing Nipple , of the same size, will plug off the nipple and tubing. The Plug Choke is capable of holding pressure differentials from above or below. NOTE: Equalizing Prong ROTPXXN Plug Choke Assembly is made up of ROTXN Lock Mandrel (PRODUCT CODE 10, 17, and/or 18) and ROTPX Equalizing Prong and Sub-Assembly with a Cap (PRODUCT CODE 20) . Product Code: 21 Read More DOWNLOAD DATASHEET REQUEST A QUOTE Equalizing Prong ROTPXXN Plug Choke Assembly Equalizing Prong ROTPXXN Plug Choke Assembly Click here TOOL APPLICATION Applications Plugging and bidirectional pressure holding in ROTXN Landing Nipples across seal bore sizes of 1.500" through 4.562." Small-bore No-Go completions where the most positive available combination of mechanical depth stop and prong-seated pressure seal is required Two-stage setting confirmation using the Check Set Tool, followed by the Prong deployment Key Benefits Delivers the highest level of setting certainty in the ROTX nipple family by combining the No-Go mechanical stop with the two-run prong-seated V-Packing seal. Shares all Prong lengths, Fishing Neck sizes, and tool numbers with the ROTPXX series, simplifying field inventory. Available in a variety of materials to suit downhole conditions. Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NIPPLE SEAL BORE SIZE 1.500” 1.625” 1.875” 2.313” ASSEMBLY NUMBER 211118181015030 211118181016230 211118181018730 211118181023130 ENGINEERING DATA MAXIMUM OD (NO-GO) 1.495” 1.620” 1.870” 2.307” RUNNING TOOL - ROTX 41182015000 41182016200 41182018700 41182023100 PULLING TOOL - ROTGR 40051315000 40051315000 40051318700 40051323100 EQUALIZING PRONGS FISHING NECK SIZE 1.000” 1.000” 1.375” 1.375” PRONG LENGTH 26.0” 26.0” 23.38” 23.46” RUNNING/PULLING TOOL 400703021375 400703021375 4014012000 4014012000 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy NIPPLE SEAL BORE SIZE 2.750” 2.813” 2.875” 3.313” ASSEMBLY NUMBER 211118181027530 211118181028130 211118181028730 211118181033130 ENGINEERING DATA MAXIMUM OD (NO-GO) 2.745” 2.808” 2.870” 3.307” RUNNING TOOL - ROTX 41182027500 41182028100 41182028700 41182033100 PULLING TOOL - ROTGR 40051327500 40051327500 40051327500 40051331202 EQUALIZING PRONGS FISHING NECK SIZE 1.375” 1.375” 1.375” 1.750” PRONG LENGTH 28.13” 28.13” 28.13” 29.0” RUNNING/PULLING TOOL 4014012000 4014012000 4014012000 4014012500 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy NIPPLE SEAL BORE SIZE 3.688” 3.813” 4.313” 4.562” ASSEMBLY NUMBER 211118181036830 211118181038130 211118181043130 211118181045630 ENGINEERING DATA MAXIMUM OD (NO-GO) 3.682” 3.807” 4.307” 4.556” RUNNING TOOL - ROTX 41182036800 41182038100 41182043100 41182045600 PULLING TOOL - ROTGR 40051336804 40051336804 40051336804 40051345600 EQUALIZING PRONGS FISHING NECK SIZE 2.313” 2.313” 3.125” 3.125” PRONG LENGTH 34.84” 34.84” 35.34” 35.34” RUNNING/PULLING TOOL 4014013000 4014013000 4014014000 4014014000 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy * Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision) RELATED TOOLS The Plug requires TWO runs to be set. Before Equalizing Prong is run in place, it is recommended to run a CHECK SET TOOL, see above ( ROTPXX Plugs , (ACCESSORY) to ensure that the Plug is set properly in the Landing Nipple profile. Plug Chokes are available in a variety of Materials, suitable for down-hole conditions. Norm Alloy is suitable for H 2 S Service (NACE MR-01-2 75, Latest Revision)

HO Heavy Duty Rope Socket Assembly - Threaded Connection Tool String HO Heavy Duty Rope Socket Assembly - Threaded Connection HO Heavy Duty Rope Socket Assembly - Threaded Connection Rebco HO Heavy Duty Rope Socket is designed for Heavy Duty Wireline Work. The wire should be passed through the body and the clamp Sub-Assembly. The unique design will trap the wire; held in place by socket screws. Product Code: 100 Read More DOWNLOAD DATASHEET REQUEST A QUOTE HO Heavy Duty Rope Socket Assembly - Threaded Connection HO Heavy Duty Rope Socket Assembly - Threaded Connection Click here TOOL APPLICATION Applications Heavy fishing and aggressive jarring operations High-load applications where conventional rope socket holding strength is insufficient Deep wells or high-pressure environments place elevated loads on the wireline connection. Key Benefits Clamp sub-assembly provides superior holding strength under high loads. Solid alloy steel construction engineered for demanding well environments. Available 1½"–2½" OD in standard threaded connections Special, well-conditioned material options are available. Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOMINAL SIZE 1 1/2” 1 3/4” 1 7/8” 2 1/8” 2 1/2” ASSEMBLY NUMBER 10006201500_ 10006201750_ 10006201870_ 10006202120_ 10006202500_ ENGINEERING DATA: MAXIMUM OD 1.50” 1.75” 1.88” 2.12” 2.50” FISHING NECK OD 1.375” 1.750” 1.750” 1.750” 2.313” LENGTH 13.1” 14.75” 14.75” 14.75” 14.75” BOTTOM CONNECTION 15/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 MATERIAL Alloy Alloy Alloy Alloy Alloy RELATED TOOLS The diameter of the Wire to be used determines the Assembly Number. To Select the wire diameter, see the selection table. Alloy Material is used to manufacture Rebco Rope Sockets. Materials suitable for specific well conditions are available. Must be ordered by Wire Size in use.

GSL Pulling Tool Assembly Pulling Tools GSL Pulling Tool Assembly GSL Pulling Tool Assembly Rebco GSL Pulling Tool is designed to retrieve ROTD Collar Lock Mandrel, see PRODUCT CODE 10. The tool can be released by jarring down. NOTE: GSL Pulling Tool has extended Core (longer reach), and it should be used only to retrieve ROTD Collar Lock Mandrel. Product Code: 40 Read More DOWNLOAD DATASHEET REQUEST A QUOTE GSL Pulling Tool Assembly GSL Pulling Tool Assembly Click here TOOL APPLICATION Applications Retrieving internal fishing neck devices where the ROTGS standard reach is confirmed to be insufficient Deep-bore gas lift valves or other devices with the internal fishing neck positioned far below the device entry Key Benefits Long-reach core extends ROTGS capability to deeply recessed internal fishing necks. Identical shear-down release mechanism to the ROTGS, no new field procedures required Prevents the frustration of repeated failed engagement attempts with an insufficient-reach tool Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOMINAL SIZE 2” 2 1/2” 3” 4” ASSEMBLY NUMBER 4005140817800 4005140821800 4005140827500 4005140836804 ENGINEERING DATA: MAXIMUM OD 1.81” 2.16” 2.72” 3.62” PIN THREAD CONNECTION 15/16” - 10 15/16” - 10 1 1/16” - 10 1 1/16” - 10 FISHING NECK OD 1.375” 1.750” 2.313” 2.313” BOTTOM THREAD (PRONG) 1/2” - 13 5/8” - 11 5/8” - 11 2 1/8” - 12 WILL ENGAGE FISHING NECK ID 1.38” 1.81” 2.31” 3.12” REACH 3.50” 3.50” 3.62” 3.02” LENGTH 14.5” 14.75” 15.04” 14.15” MATERIAL Alloy Alloy Alloy Alloy ACCESSORIES: PINNING TOOL ASS’Y 167118 167112 167113 167113 RELATED TOOLS Retrieving Sub-Surface devices with Internal Fishing Necks; there are many occasions where a need for Shear Up to release Pulling Tool is an advantage. GU Shear-Up Adapter used with GS & GSL Pulling Tools converts the combined Tools to GR / GRL Pulling Tool Assembly respectively. GR Pulling Tool ( GS / GU ) can be released by upward jarring action. NOTE: When the GR tool is used, only the Shear Pin in the Shear-Up Adapter can be used. The Shear Pin must be removed from the GS portion of the Tool. This Shear Pin (in the GS Tool) cannot be sheared when the GU Shear-Up Adapter is attached to the GS Pulling Tool.

ROTFWB Instrument Hanger Assembly 'BHP' Instrument Hangers ROTFWB Instrument Hanger Assembly ROTFWB Instrument Hanger Assembly Rebco ROTFWB Instrument Hanger is used to land and lock geophysical instruments in BF Landing Nipples respectively, to allow recording of reservoir data. The Instrument Hanger Assembly consists of ROTW-1/2 Lock Mandrel Sub-Assembly and a Hanger Sub; offered with Amerada (3/4" - 16) Box connection and/or Sucker Rod (15/16" - 10) Box connection. Product Code: 33 Read More DOWNLOAD DATASHEET REQUEST A QUOTE ROTFWB Instrument Hanger Assembly ROTFWB Instrument Hanger Assembly Click here TOOL APPLICATION Applications Deploying instruments into BF Landing Nipples where the ROTW-1/2 lock mandrel profile is specified Direct substitution for the ROTFSB when the ROTW mandrel interface is required by the completion design Key Benefits ROTW-1/2 Lock Mandrel Sub-Assembly provides the alternative BF nipple locking interface to the ROTS-1/2 The Thread Protector on the ROTC-1 Running Tool protects the tool string during deployment in dirty wellbore environments. Identical Hanger Sub and box thread connection options to the ROTFSB, consistent instrument interface across both hanger types Available in non-standard sizes and materials upon request Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOM SIZE SEAL BORE SIZE ASSEMBLY NUMBER LOCK MANDREL SUB-ASS’Y HANGER SUB BOX THREAD BOX THREAD w/3/4” - 16 w/15/16” - 10 3/4” - 16 15/16” - 10 2 3/8” 1.781” 33251701217800 33251701217801 10172202370 330117810 330117800 1.813” 33251701218100 33251701218101 330118110 330118100 1.875” 33251701218700 33251701218701 10172201870 330118710 330118700 2 7/8” 2.250” 33251701222500 33251701222501 10172202250 330122510 330122500 2.313” 33251701223100 33251701223101 10172202310 330123110 330123100 3 1/2” 2.562” 33251701225600 33251701225601 10172202560 330125610 330125600 2.750” 33251701227500 33251701227501 10172202750 330127510 330127500 2.813” 33251701228100 33251701228101 10172202810 330128110 330128100 4 1/2” 3.688” 33251701136800 33251701136801 10171203680 330136810 330136800 3.750” 33251701137500 33251701137501 10171203750 330137510 330137500 3.813” 33251701138100 33251701138101 10171203810 330138110 330138100 RELATED TOOLS ROTA or ROTAC can be used RB , SB , & JDC Pulling Tools can be used To run ROTFWB & ROTRZB Instrument Hangers, ROTC-1 Running Tool should be with Thread Protector BB Probe comes in two lengths (Short and Long) to composite for some Lock Mandrel Sub-Assemblies which are available with different lengths of the Fishing Neck.

ROTPX Equalizing Prong and Valve Sub-Assembly Equalizing Sub-Assemblies ROTPX Equalizing Prong and Valve Sub-Assembly ROTPX Equalizing Prong and Valve Sub-Assembly Rebco ROTPX Equalizing Prong and Valve Sub-Assembly, when attached to ROTX and/or ROTXN Lock Mandrel Assembly, converts the Lock Mandrel to a Plug Choke, with equalizing device, capable of holding pressure differentials from above or below. Product Code: 24 Read More DOWNLOAD DATASHEET REQUEST A QUOTE ROTPX Equalizing Prong and Valve Sub-Assembly ROTPX Equalizing Prong and Valve Sub-Assembly Click here TOOL APPLICATION Applications Converting ROTX and ROTXN Lock Mandrel Assemblies into bidirectional pressure-holding Plug Chokes with integrated equalizing capability, in nipple seal bores from 1.500" through 4.562." Completions requiring active pressure management from both above and below the set ROTX or ROTXN lock mandrel Small-bore completions beginning at 1.500" nipple seal bore, where bidirectional plug choke capability is required H2S environments requiring Norm Alloy construction per NACE MR-01-75 Key Benefits Bidirectional pressure-holding capability converts the ROTX or ROTXN lock mandrel into a full-plug choke, significantly expanding its functional role beyond simple anchoring and equalization. Covers the complete ROTX and ROTXN lock mandrel size range from 1.500" through 4.562", providing a ROTPX option for every lock mandrel size in the ROTX family. The Prong can be run and pulled independently of the lock mandrel, allowing the plug choke function to be added or removed in a single wireline trip without disturbing the set lock mandrel. Norm Alloy construction for H2S service; a variety of materials available to suit well conditions. Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NIPPLE SEAL BORE 1.500” 1.625” 1.875” 2.313” SUB-ASSEMBLY NUMBER 24111815031 24111816231 24111818731 24111823131 ENGINEERING DATA MAXIMUM OD (NO-GO) 1.495” 1.620” 1.870” 2.307” BOX THREAD CONNECTION 1 1/8” - 16 1 1/8” - 16 1 3/8” - 14 1 3/4” - 12 PRONG FISHING NECK SIZE 1.000” 1.000” 1.375” 1.375” PRONG LENGTH 26.0” 26.0” 23.38” 23.46” LENGTH 29.87” 29.87” 26.46” 26.56” ‘V’ PACKING OD .630” .630” .938” 1.250” PRONG RUNNING / PULLING TOOL 400703021375 400703021375 4014012000 4014012000 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy NIPPLE SEAL BORE 2.750” 2.813” 2.875” 3.313” ASSEMBLY NUMBER 24111827530 24111828130 24111828730 24111833130 ENGINEERING DATA MAXIMUM OD (NO-GO) 2.745” 2.808” 2.870” 3.307” BOX THREAD CONNECTION 2 1/4” – 12 SLB 2 1/4” – 12 SLB 2 1/4” – 12 SLB 2 3/4” – 12 SLB PRONG FISHING NECK SIZE 1.375” 1.375” 1.375” 1.375” PRONG LENGTH 25.18” 25.18” 25.18” 25.18” LENGTH 28.13” 28.13” 28.13” 28.13” ‘V’ PACKING OD 1.500” 1.500” 1.500” 1.500” PRONG RUNNING / PULLING TOOL 4014012000 4014012000 4014012000 4014012000 MATERIAL * Norm Alloy * Norm Alloy * Norm Alloy * Norm Alloy * NIPPLE SEAL BORE 3.688” 3.813” 4.313” 4.562” ASSEMBLY NUMBER 24111836830 24111838130 24111843130 24111845630 ENGINEERING DATA MAXIMUM OD (NO-GO) 3.682” 3.807” 4.307” 4.556” BOX THREAD CONNECTION 3 1/16” – 12 SLB 3 1/16” – 12 SLB 3 1/4” – 12 SLB 3 3/4” – 12 SLB PRONG FISHING NECK SIZE 2.313” 2.313” 3.125” 3.125” PRONG LENGTH 34.84” 34.84” 39.04” 39.04” LENGTH 37.15” 36.95” 41.2” 41.23” ‘V’ PACKING OD 1.500” 1.500” 2.313” 2.313” PRONG RUNNING / PULLING TOOL 4014013000 4014013000 4014014000 4014014000 MATERIAL * Norm Alloy * Norm Alloy * Norm Alloy * Norm Alloy * Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision) RELATED TOOLS Norm Alloy is suitable for H 2 S Service (NACE MR-01-75, Latest Revision) Equalizing Sub-Assemblies are available in variety of Materials to suit Well Conditions.

Glossary A Gauge Cutter A Gauge Cutter The Rebco A Gauge Cutter is a multi-functional wireline tool that serves as the standard first run on any well before subsurface controls are deployed. Its primary mechanical function is to scrape and remove accumulated paraffin wax, corrosion scale, mineral deposits, and other foreign materials from the tubing's internal diameter, restoring a clean bore for the unrestricted passage of wireline tools and downhole equipment. Beyond cleaning, the Gauge Cutter simultaneously gauges the tubing bore, confirming that the tubing ID is clear and undamaged to the depth at which the tool tags, and allows the operator to locate and depth-reference landing nipples, collar restrictions, and no-go profiles within the completion string. The size relationship between the Gauge Cutter OD and the tubing ID is critical: the cutter should be selected to run as close to the tubing drift as practical for the work required. Running progressively smaller cutters and recording the depth at which each one tags an obstruction allows the operator to map the profile and extent of a bridge or restriction before committing to a remediation method. It is strongly recommended that a Gauge Cutter run be completed prior to any wireline operation involving the deployment of subsurface controls, running a lock mandrel, plug, or safety valve into an unverified bore, as this risks damaging the subsurface device or causing it to become stuck before it reaches its intended setting depth. Available in standard threaded connections, ¾"–6⅝" OD. Custom sizes available on special order. How to Order: Part Number is 10600x.xxx (0 prefix for ODs less than 1.00"). All Gauge Cutters are part-numbered by OD dimension to 3 decimal places ±.002". Metric parts: prefix 10601. Back to the Tool page PDF download A Gauge Cutter A Gauge Cutter Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary ROTXR Pump-Through Bottom Sub-Assembly ROTXR Pump-Through Bottom Sub-Assembly The Rebco ROTXR Pump-Through Bottom Sub-Assembly is designed for use with Lock Mandrels and Equalizing Valves (valve type) and is selected based on the nominal size and profile of the Landing Nipple in use. The sub incorporates a spring-loaded Ball and Seat assembly that holds pressure only from below, while providing a means to pump fluid through the plug from above. The assembly consists of four components: a Cage, a Ball and Seat Sub-Assembly, a Spring Retainer, and a Spring. Part numbers and full engineering data for the ROTXR are referenced in Section XVI (Plug Chokes), as this sub-assembly is integral to the plug choke system. When ordering, the operator must specify the Lock Mandrel size and type to be used, as well as the material required to suit downhole conditions and service requirements. How to Order: Product Code 21. Specify Lock Mandrel size and type to be used with, Landing Nipple profile, and material to suit downhole conditions. Refer to Section XVI for part numbers and engineering data. Back to the Tool page PDF download ROTXR Pump-Through Bottom Sub-Assembly ROTXR Pump-Through Bottom Sub-Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary ROTFSG-1 Plug Choke with Removable Mandrel Top No-Go (Selective) ROTFSG-1 Plug Choke with Removable Mandrel Top No-Go (Selective) Back to the Tool page PDF download ROTFSG-1 Plug Choke with Removable Mandrel Top No-Go (Selective) ROTFSG-1 Plug Choke with Removable Mandrel Top No-Go (Selective) Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary ROTRB-2 Equalizing Check Valve Assembly ROTRB-2 Equalizing Check Valve Assembly The Rebco ROTRB-2 is the ROTBR Landing Nipple equivalent of the ROTFB-2 , an Equalizing Check Valve that performs the same one-way flow control function but is designed specifically to seat on the bottom No-Go shoulder of the ROTBR Nipple profile rather than the ROTF . Like the ROTFB-2 , the ROTRB-2 is not locked into the nipple; it rests on the No-Go shoulder of the ROTBR nipple, which prevents downward movement, and incorporates the same built-in pressure equalizing method before retrieval. The distinction between the ROTFB-2 and ROTRB-2 is entirely one of nipple profile compatibility: the ROTFB-2 is for ROTF nipples, and the ROTRB-2 is for ROTBR nipples. Both share the same running and pulling tool requirements ( ROTC-1 Running Tool, SB or JDC Pulling Tool) and the same size range coverage (2⅜" through 4½", seal bores 1.781" to 3.813"). Selecting the correct valve for the nipple type in the completion string is critical. A ROTFB-2 will not seat correctly in a ROTBR nipple and vice versa. How to Order: Product Code 12. Specify nominal size, seal bore size, and material. Confirm the ROTBR nipple profile is present before selecting over the ROTFB-2 . Back to the Tool page PDF download ROTRB-2 Equalizing Check Valve Assembly ROTRB-2 Equalizing Check Valve Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary ROTPX Equalizing Prong and Valve Sub-Assembly ROTPX Equalizing Prong and Valve Sub-Assembly The Rebco ROTPX Equalizing Prong and Valve Sub-Assembly is the ROTX -family counterpart to the ROTPR , and when attached to a ROTX or ROTXN Lock Mandrel Assembly, converts the lock mandrel into a full Plug Choke with an integrated equalizing device capable of holding pressure differentials from both above and below. The ROTPX covers nipple seal bores from 1.500" through 4.562", matching the complete size range of the ROTX and ROTXN lock mandrel families. Like the ROTPR , the ROTPX incorporates a Prong with a Fishing Neck for independent Prong running and pulling operations, separate from the lock mandrel itself. Prong lengths range from 23.38" at the 1.875" seal bore up to 39.04" at the 4.313" and 4.562" seal bores, and the V-Packing OD scales from .630" at the smallest seal bores up to 2.313" at the largest. The Prong Running and Pulling Tool varies by size and must be correctly specified when ordering. All sizes are constructed from Norm Alloy, certified for H2S service per NACE MR-01-75, and all Equalizing Sub-Assemblies are available in a variety of materials to suit well conditions. How to Order: Product Code 24. Specify nipple seal bore size, the ROTX or ROTXN Lock Mandrel assembly number to be used with, V-Packing OD, Prong Running and Pulling Tool number for the applicable size, material, and service conditions. Full engineering data, including Prong lengths, Fishing Neck sizes, and Prong Running and Pulling Tool numbers, are listed in the engineering data tables on Pages XV-19 and XV-20. Back to the Tool page PDF download ROTPX Equalizing Prong and Valve Sub-Assembly ROTPX Equalizing Prong and Valve Sub-Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary CD Sampler (Drive Down) Bailer Assembly CD Sampler (Drive Down) Bailer Assembly The Rebco CD Sampler/Drive-Down Bailer is a dual-purpose tool engineered to take a physical debris sample from the obstruction site, or, in its longer drive-down configuration, to physically penetrate and capture a column of compacted debris for removal from the wellbore. The tool body consists of a top sub with a fishing neck, a primary collection tube, and an interchangeable bottom shoe valve. The angled mule shoe at the lower end helps guide the tool into debris and cuts a path of entry on the downstroke, while the ball or flapper valve at the base captures and retains the material on recovery. In the sampler configuration (2 ft tube length), the tool takes a representative grab sample of debris at the work site, allowing the operator to assess debris type, particle size, and composition at the surface before selecting the most appropriate full-scale bailing or remediation method. In the drive-down configuration (5 ft tube length), the tool is used to physically penetrate and extract a full column of compacted sand, scale, or granular debris that cannot be lifted by pump action alone. The angled mule shoe helps force entry into hard-packed material on the downstroke. Available with ball-type, flapper-type, or junk-catcher-type bottom shoe configurations, all of which are also available with optional mule shoe bottoms. Both 2 ft sample tube and 5 ft drive-down tube lengths are available as standard. Alternative tube lengths available on request. Available in 1½"–4" OD. Back to the Tool page PDF download CD Sampler (Drive Down) Bailer Assembly CD Sampler (Drive Down) Bailer Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.