top of page

A Gauge Cutter

The Rebco A Gauge Cutter is a multi-functional tool engineered for various wireline applications. Its primary function is to remove paraffin, corrosion, and other foreign materials from the internal diameter (ID) of the tubing string. The Gauge Cutter is also used to gauge and tag obstructions within the tubing and to locate and tag landing nipples in the wellbore.


Product Code: 106

Applications

  • Mandatory pre-job first run to verify tubing bore condition before deploying any subsurface controls.

  • Removal of paraffin wax, scale, mineral deposits, and debris from the tubing ID

  • Locating and depth-referencing landing nipples, collar profiles, and no-go restrictions

  • Confirming total depth and tubing condition before running pressure gauges or instruments

  • Profiling bridge obstructions by running progressively smaller cutters to map restriction geometry


Key Benefits

  • Cleans, gauges, and profiles the tubing bore in a single run, saving rig time.

  • Prevents costly downhole tool damage by confirming bore condition before every intervention

  • Available in ¾"–6⅝" OD range to cover all standard tubing and casing sizes

  • Standard wireline thread pin connection and fishing neck on all sizes

  • Custom ODs available for non-standard tubing or casing applications

Note: It is strongly recommended that a Gauge Cutter be run prior to deploying any subsurface controls. This ensures that the controls can pass freely through the tubing without obstruction.


Gauge Cutters are available in custom sizes within the nominal outside diameter (OD) range. For size options, refer to Table 1.


Product Code: 106


How to Order


1.Part Number is 10600x.xxx - 0 for less than 1.00"

2.All Gauge Rings are Part Numberedby 'OD' dimension to 3 decimal places +/- .002"


Metric Dimensions are to be marked to 3 decimal places Part Number is 10601xxxx

1 inch = 2.540 cm

TECHNICAL DATA

OD RANGE

THREAD

FISHING NECK

LENGTH

MIN

MAX

.750

1.032

1/2” - 13

.688

5.94

5/8” - 11

.750

6.00

1.062

1.281

1.000

6.62

1.296

1.468

1.500

1.730

15/16” - 10

1.187

8.00

1.750

2.140

1.375

9.50

2.156

2.375

2.406

2.750

1 1/16” - 10

1.750

2.760

2.906

2.937

3.468

2.313

3.484

4.328

4.375

5.906

3.125

12.00

5.937

6.687

Large Sizes

Custom order only: - Thread, FN and Length


RELATED TOOLS

Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

bottom of page