top of page

ROTB & ROTH Equalizing Sub

Rebco ROTB & ROTH Equalizing Subs are to be used with Sub-Surface Controls such as Locking Mandrels. Both Equalizing Subs are identical except the ID is larger in ROTH Equalizing Sub.

These Sub-Assemblies are designed to allow pressure differentials to be equalized across the Lock Mandrels and Flow controls before attempting to retrieve them.


Product Code: 20

Applications

  • Equalizing pressure across Lock Mandrels and flow control devices in 2", 2-1/2", and 3" nominal sizes before retrieval attempts

  • Applications requiring a small, controlled equalization flow rate using the .003" orifice (ROTB), a moderate flow rate using the .006" orifice (ROTH), or a larger flow rate using the .011" orifice variant

  • Any completion where trapped pressure below a set lock mandrel must be safely bled off prior to pulling operations


Key Benefits

  • Three orifice sizes (.003", .006", .011") provide graduated control over the equalization flow rate, allowing the operator to match the equalization speed to the well's pressure conditions and the sensitivity of adjacent equipment.

  • Identical dimensions across the ROTB and ROTH simplify inventory; the only difference between the two is the orifice size and minimum ID.

  • Stainless Steel construction provides corrosion resistance for long service life in aggressive downhole environments.

  • Available in a variety of materials suitable for specific downhole conditions.

NOTE: These types of Equalizing Subs require running/pulling equalizing prongs. Equalizing Subs are available in variety of Materials, suitable for down-hole conditions.

TECHNICAL DATA

ROTB Equalizing Subs




NOMINAL SIZE

2”

2 1/2”

3”

 ASSEMBLY NUMBER

2001202000

2001202500

2001203000

ENGINEERING DATA

MAXIMUM OD

1.75”

2.12”

2.62”

MINIMUM ID

.53”

.72”

1.16”

EFFECTIVE AREA THRU ORIFICE PLATE

.003”

.003”

.003”

BOX THREAD CONNECTION

1 3/16” - 14

1 9/16” - 12

2” - 12

PIN THREAD CONNECTION

1 3/16” - 14

1 9/16” - 12

2” - 12

LENGTH

4.25”

4.25”

4.25”

MATERIAL

Stainless

Stainless

Stainless

ROTH Equalizing Subs




NOMINAL SIZE

2”

2 1/2”

3”

 ASSEMBLY NUMBER

2006202000

2006202500

2006203000

ENGINEERING DATA

MAXIMUM OD

1.75”

2.12”

2.62”

MINIMUM ID

.69”

.87”

1.50”

EFFECTIVE AREA THRU ORIFICE PLATE

.006”

.006”

.006”

BOX THREAD CONNECTION

1 3/16” - 14

1 9/16” - 12

2” - 12

PIN THREAD CONNECTION

1 3/16” - 14

1 9/16” - 12

2” - 12

LENGTH

4.25”

4.25”

4.25”

MATERIAL

Stainless

Stainless

Stainless


RELATED TOOLS

Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

bottom of page