RC Rope Socket Assembly
Rebco RC Rope Socket is designed to connect a Capsulated Line to the Tool String. The wear bushing and swivel design, prevent damage to the wire. The Capsulated Line is inserted through the wear bushing, and the Body. The clamp is tightened to the line and pulled into the Rope Socket. A connector sub is slipped over the bottom sub, a retainer is screwed and secured by a set screw. The bottom sub and the connector sub are made up to the Body.
Product Code: 100
Applications
Connecting the capsulated/flatpack cable to the tool string
Operations where standard knot or wedge terminations are not suitable for the line type
Key Benefits
Clamp design accommodates a capsulated line that cannot be tied or wedged
Integrated wear bushing protects the cable jacket from mechanical damage
Built-in swivel prevents torsional stress transmission into the cable
Alloy Material is used to manufacture Rebco ROPE SOCKETS. Materials suitable for specific well conditions are available.
Must be ordered by Wire Size in use.
Sizes not listed are also available, please enquire.
TECHNICAL DATA
NOMINAL SIZE | ASSEMBLY NO. | FISH NECK OD | MAX OD | BOX THD CONNECTION | FOR CABLE SIZE | LENGTH |
1 1/2” | 100130215001 | 1.375” | 1.50” | 15/16” – 10 Pin | 1/8” | 7.285” |
1 1/2” | 100130215002 | 1.375” | 1.50” | 1/4” | 1/8” | 7.285” |
RELATED TOOLS
Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.