ROTRKH Plug Choke with Removable Mandrel (Bottom No-Go)
Rebco ROTRKH Plug Choke with Removable Mandrel is a positive blank-off device designed to seal off pressure from above and below. The Plug Assembly is a Bottom No-Go device to be set in BR Landing Nipple. The Plug requires TWO runs to be set.
Product code: 21
Applications
Large-bore positive blank-off and bidirectional pressure sealing in BR Landing Nipples, for seal bore sizes of 2.750" through 3.813."
Bottom No-Go depth reference at the nipple for large-bore completions where a BR nipple profile is installed
Two-run setting with the ROTGS Running and Pulling Tool and ROTM Prong
Key Benefits
The Bottom No-Go orientation complements the ROTFMH Top No-Go, providing the correct plug for the nipple profile type present in the completion string.
Shares all tooling with the ROTFMH, including ROTGS, ROTM Prong, and SB Equalizing Prong Running and Pulling Tool.
Norm Alloy construction for H2S service.
Available in a variety of materials.
Plug Chokes are available in a variety of Materials, suitable for down-hole conditions.
Norm Alloy is suitable for H2S Service (NACE MR-01-2 75, Latest Revision)
TECHNICAL DATA
NIPPLE SEAL BORE SIZE | 2.750” | 2.813” | 3.688” | 3.750” | 3.813” | |
ASSEMBLY NUMBER | 2113240627530 | 2113240628130 | 2113240636830 | 2113240637530 | 2113240638130 | |
ENGINEERING DATA | ||||||
MAXIMUM OD (NO-GO) | 2.745” | 2.802” | 3.68” | 3.74” | 3.80” | |
FISHING NECK SIZE | LOCK MANDREL | 2.31” | 2.31” | 3.12” | 3.12” | 3.12” |
EQUALIZING PRONG | 2.313” | 2.313” | 3.125” | 3.125” | 3.125” | |
LENGTH | 36.41” | 36.41” | 44.63” | 44.63” | 44.63” | |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | |
TOOLS REQUIRED: | ||||||
RUNNING/PULLING TOOL - ROTGS | 40051427500 | 40051427500 | 40051436804 | 40051436804 | 40051436804 | |
RUNNING/PULLING PRONG - ROTM | 41092750 | 41092810 | 41094500 | 41094500 | 41094500 | |
EQ. PRONG RUNNING/PULLING TOOL - SB | 4014013000 | 4014013000 | 4014014000 | 4014014000 | 4014014000 | |
* Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision)
RELATED TOOLS
Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.