Applications
Retrieving external fishing neck devices in wells where the preferred release direction is uncertain
Operations where both upward and downward jar release attempts may be required on the same run
Reducing the risk of being unable to release from a stuck device due to commitment to a single release direction
Key Benefits
Only the pulling tool in the Rebco lineup can shear its release pin in either the upward or downward direction.
Eliminates the need to trip out of the hole to switch between shear-up and shear-down tools when the initial release attempt fails
Provides maximum operational flexibility in unpredictable or challenging wellbore conditions
The Tool can be run in the Shear-Up to release or Shear-Down to release mode.
Single Core can be adjusted to the desired Reach: Short, Medium or Long Reach.
TECHNICAL DATA
NOMINAL SIZE | 2” | 2 1/2” | 3” | |
ASSEMBLY NUMBER | 4016202000 | 4016202500 | 4016203000 | |
ENGINEERING DATA: | ||||
MAXIMUM OD | 1.86” | 2.25” | 2.80” | |
PIN THREAD CONNECTION | 15/16” - 10 | 15/16” - 10 | 1 1/16” - 10 | |
FISHING NECK OD | 1.375” | 1.375” | 1.750” | |
BOTTOM THREAD (PRONG) | 1/2” - 13 | 1/2” - 13 | 5/8” - 11 | |
WILL ENGAGE FISHING NECK OD | 1.375” | 1.750” | 2.313” | |
REACH | SHORT REACH | 1.25” | 1.30” | 1.38” |
MEDIUM REACH | 2.05” | 2.10” | 2.20” | |
LONG REACH | 2.60” | 2.60” | 2.70” | |
LENGTH | SHEAR-UP MODE | 19.46” | 20.25” | 21.41” |
SHEAR-DOWN MODE | 22.40” | 23.63” | 23.77” | |
MATERIAL | Alloy | Alloy | Alloy | |
ACCESSORY: Pinning Tool Assembly | 16711004 | 16711004 | 16711005 | |
RELATED TOOLS
Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.