top of page

SO Swabbing Mandrel Assembly

Rebco SO Swabbing Mandrel is used to manipulate the well fluid within the tubing in an effort to create upward flow. CAUTION: Rebco SO Swabbing Mandrel is intended for light duty swabbing as required by Slickline operations. The Mandrel has no internal mechanism for "dumping" of the fluid in case of excessive weight pulled.


Product Code: 168

Applications

  • Inducing flow in wells that cannot produce naturally to the surface due to insufficient reservoir pressure

  • Reducing hydrostatic head in loaded or killed wells following workover or completion operations

  • Assisting with well cleanup after perforation, stimulation, or fluid injection treatments

  • Light-duty periodic swabbing in low-pressure wells to maintain production


Key Benefits

  • Simple, reliable piston-cup design requires no downhole activation or mechanical trip mechanism.

  • No-go shoulder-sized-to-API-standard weight tubing drift prevents accidental deployment through tight restrictions.

  • Available in 2⅜" – 5½" tubing sizes to cover all common production tubing

  • Swab cups are sold separately, allowing cups to be replaced in the field as they wear without replacing the entire mandrel assembly.

  • The availability of Assemblies is not limited to the Tubing properties shown on the Datasheet.


  • Product Code: 168


  • NO-GO is Drift Size for API Standard Weight Tubing


NOTE: CUPS SOLD SEPERATELY

TECHNICAL DATA

NOMINAL SIZE

2 3/8”

2 7/8”

3 1/2”

4 1/2”

5 1/2”

ASSEMBLY NUMBER

16814202000

16814202500

16814203500

16814204500

16814205500

ENGINEERING DATA:

MAXIMUM OD

FOR TUBING ID

1.995”

2.441”

2.995”

4.090”

4.950”

NO-GO *

1.906”

2.343”

2.906”

3.75”

4.50”

FOR TUBING WEIGHT

4.6 - 4.7 lbs/ft.

6.4 - 6.5 lbs/ft.

9.3 lbs/ft.

9.5 lbs/ft.

15.5 lbs/ft.

BODY

1.75”

1.75”

1.75”

3.19”

3.19”

PIN THREAD CONNECTION 

15/16” - 10

15/16” - 10

15/16” - 10

1 1/16” - 10

1 1/16” - 10

FISHING NECK

1.375”

1.375”

1.375”

2.313”

2.313”

LENGTH

23.3”

23.37”

24.8”

24.78”

24.68”

MATERIAL

Alloy

Alloy

Alloy

Alloy

Alloy

  • NO-GO is Drift Size for API Standard Weight Tubing

  • Cups sold separately.

RELATED TOOLS

Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

bottom of page