A Tubing Swage
The Rebco A Tubing Swage is engineered to expand or reform constricted areas within the tubing's internal diameter (ID), ensuring the free passage of wireline tools and sub-surface controls. The tool features an outside diameter (OD) nearly equal to the tubing drift size, with tapered upper and lower ends to ease entry and exit. A central bore with lateral ports allows for efficient fluid bypass during operations.
Product Code: 107
Applications
Restoring lightly collapsed or mechanically deformed tubing sections to full drift diameter
Opening partially crushed or pinched tubing caused by surface handling, wellhead loads, or external pressure events
Opening bull-plug-type end caps on the lower end of the tubing string when required
Pre-treatment pass to restore the bore before running subsurface controls into a deformed completion string
Key Benefits
Restores tubing bore to drift diameter without requiring a rig workover or tubing pull.
The dual-tapered design provides gradual reforming action, reducing the risk of the swage sticking in the restriction.
Central bore and lateral ports provide fluid bypass to prevent hydraulic lock during transit.
Type C version available with a box bottom connection for stacking or specialized configurations
Available in ¾"–6⅝" OD; custom sizes on request
Tubing Swage can be manufactured to any specific size within the nominal OD range. For available specifications, refer to Table 1.
Product Code: 107
How to Order
1.Part Number is 10700x.xxx - 0 for less than 1.00"
2.All Tubing Swages are Part Numbered by 'OD' dimension to 3 decimal places +/- .002"
Metric Dimensions are to be marked to 3 decimal places Part Number is 10701xxxx
1 inch = 2.540 cm
NOTE: Rebco C Tubing Swage (10702_) has additional Box Connection on the bottom. If Box Connection is other than Pin Connection, please specify.
TECHNICAL DATA
OD RANGE | THREAD | FISHING NECK | LENGTH | |
MIN | MAX | |||
.750 | 1.032 | 1/2” - 13 | .688 | 7.30 |
5/8” - 11 | .750 | |||
1.062 | 1.281 | 1.000 | 8.00 | |
1.296 | 1.468 | |||
1.500 | 1.730 | 15/16” - 10 | 1.187 | |
1.750 | 2.140 | 1.375 | 11.00 | |
2.156 | 2.375 | |||
2.406 | 2.750 | 1 1/16” - 10 | 1.750 | |
2.760 | 2.906 | |||
2.937 | 3.468 | 2.313 | ||
3.484 | 4.328 | |||
4.375 | 5.906 | 3.125 | 15.00 | |
5.937 | 6.687 | |||
Large Sizes | Custom order only: - Thread, FN and Length | |||
RELATED TOOLS
Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.