OM-1 Kick-Over Tool Assembly
The Rebco OM Series Kickover Tools are wireline service tools used to install compatible 1½-in. OD side-pocket subsurface-control devices in Camco side-pocket mandrels equipped with an orienting sleeve, or to retrieve those devices during well intervention operations. Used with the appropriate running or pulling tool, the kickover assembly uses a locating finger and kick springs to orient the tool string with the mandrel’s side pocket and position the attached service tool for installation or retrieval. The arm housing helps protect the kickover assembly and attached device during operation. A spacer bar is required for retrieval applications, and a knuckle joint is recommended directly above the kickover tool.
Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.