TOOL APPLICATION
Applications
Positive blank-off and bidirectional pressure sealing in BF Landing Nipples and the upper seal bore of the ROTL Sliding Sleeve, using a Top No-Go mechanical stop for certain positional reference
Nominal tubing sizes from 2" through 3-1/2", where a Top No-Go removable mandrel plug is the required configuration
Completions where selective passing capability is not needed, and the positive No-Go stop is the preferred depth reference.
Key Benefits
The Top No-Go design provides a mechanical stop at the nipple, preventing the plug from passing the intended depth below.
The removable mandrel design allows the mandrel to be run and pulled independently of the sealing element.
Shares the same running and pulling tool family as the ROTFSG-2, keeping field inventory consistent across the BF nipple plug family.
Redress Kit available for all sizes.
Available in a variety of materials to suit downhole conditions.
Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.
TECHNICAL DATA
NOMINAL SIZE | 4 1/2" | ||||
SEAL BORE SIZE | 3.688” | 3.750” | 3.813” | ||
ASSEMBLY NUMBER | 2125170513680 | 2125170513750 | 2125170513810 | ||
ENGINEERING DATA | |||||
MAXIMUM OD - (No-Go) | 3.740” | 3.802” | 3.864” | ||
FISHING NECK OD | 3.125” | 3.125” | 3.125” | ||
RUNNING TOOL Note *1 | 4 1/2” ROTC-1 | 41022014500 | 41022014500 | 41022014500 | |
4 1/2” ROTBG | 4101054500 | 4101054500 | 4101054500 | ||
PULLING TOOL Note *2 | SHEAR DOWN | SB | 4014014000 | 4014014000 | 4014014000 |
JDC (a)(b) | 400703024000 (a) | 400703024000 (b) | 400703024000 | ||
SHEAR UP | ROTRB | 4013014000 | 4013014000 | 4013014000 | |
JUC (a)(b) | 400716024000 (a) | 00716024000(b) | 400716024000 | ||
PULLING PROBE | 4 1/2" ROTB | 1950185300 | 1950185300 | 1950185300 | |
LENGTH | 20.3” | 20.3” | 20.3” | ||
MATERIAL | Alloy | Alloy | Alloy | ||
Reference: REDRESS KIT - Only ‘V’ Packing (Qty - 6 only) included as part of the REDRESS KIT
Note: *1 – either / or Running Tools can be Used
Note: *2 CAUTION:
(a) - Pulling Tool ‘ROTJDC’ and ‘ROTJUC’ will not pass thru 3.688” Seal Bore.
(b) - Pulling Tool ‘ROTJDC’ and ‘ROTJUC’ will not pass thru 3.750” Seal Bore, but may be used for retrieving if there is no restriction in the tubing above the accessory smaller than the next larger Seal Bore.