GSL Pulling Tool Assembly
Rebco GSL Pulling Tool is designed to retrieve ROTD Collar Lock Mandrel, see PRODUCT CODE 10. The tool can be released by jarring down.
NOTE: GSL Pulling Tool has extended Core (longer reach), and it should be used only to retrieve ROTD Collar Lock Mandrel.
Product Code: 40
TOOL APPLICATION
Applications
Retrieving internal fishing neck devices where the ROTGS standard reach is confirmed to be insufficient
Deep-bore gas lift valves or other devices with the internal fishing neck positioned far below the device entry
Key Benefits
Long-reach core extends ROTGS capability to deeply recessed internal fishing necks.
Identical shear-down release mechanism to the ROTGS, no new field procedures required
Prevents the frustration of repeated failed engagement attempts with an insufficient-reach tool
Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.
TECHNICAL DATA
NOMINAL SIZE | 2” | 2 1/2” | 3” | 4” |
ASSEMBLY NUMBER | 4005140817800 | 4005140821800 | 4005140827500 | 4005140836804 |
ENGINEERING DATA: | ||||
MAXIMUM OD | 1.81” | 2.16” | 2.72” | 3.62” |
PIN THREAD CONNECTION | 15/16” - 10 | 15/16” - 10 | 1 1/16” - 10 | 1 1/16” - 10 |
FISHING NECK OD | 1.375” | 1.750” | 2.313” | 2.313” |
BOTTOM THREAD (PRONG) | 1/2” - 13 | 5/8” - 11 | 5/8” - 11 | 2 1/8” - 12 |
WILL ENGAGE FISHING NECK ID | 1.38” | 1.81” | 2.31” | 3.12” |
REACH | 3.50” | 3.50” | 3.62” | 3.02” |
LENGTH | 14.5” | 14.75” | 15.04” | 14.15” |
MATERIAL | Alloy | Alloy | Alloy | Alloy |
ACCESSORIES: | ||||
PINNING TOOL ASS’Y | 167118 | 167112 | 167113 | 167113 |
RELATED TOOLS
Retrieving Sub-Surface devices with Internal Fishing Necks; there are many occasions where a need for Shear Up to release Pulling Tool is an advantage. GU Shear-Up Adapter used with GS & GSL Pulling Tools converts the combined Tools to GR / GRL Pulling Tool Assembly respectively.
GR Pulling Tool (GS / GU) can be released by upward jarring action.
NOTE: When the GR tool is used, only the Shear Pin in the Shear-Up Adapter can be used. The Shear Pin must be removed from the GS portion of the Tool. This Shear Pin (in the GS Tool) cannot be sheared when the GU Shear-Up Adapter is attached to the GS Pulling Tool.