ROTRN Lock Mandrel Assembly
Rebco ROTRN Lock Mandrel has chamfered Keys, and when a Bottom Sub is added, it becomes a No-Go Lock Mandrel. It is to be landed in a ROTRN Landing Nipple of the same size.
Lock Mandrels are available in a variety of Materials, suitable to down-hole conditions.
Product Code: 10
Applications
Completions requiring a positive No-Go stop at the nipple when a Bottom Sub is installed, ensuring the lock cannot pass through a nipple with the same or smaller profile
Selective setting without the Bottom Sub, allowing the ROTRN to function as a selective lock when the additional No-Go feature is not required
High-flow completions prone to vibration-induced unlocking, using the Product Code 17 Interference Hold Down variant.
Large-bore completions from 3.437" to 4.813", using the Product Code 18 Safety Spring configuration
Key Benefits
The chamfered Key design, combined with an optional Bottom Sub, provides the ROTRN with dual-mode capability, functioning as either a selective lock or a No-Go lock depending on how the assembly is configured.
Interchangeable running and pulling tools with the ROTR series reduce the number of distinct tools a field technician needs to carry.
All sizes available in a variety of materials suitable for downhole conditions, including H2S service.
Redress kits are available for Product Codes 17 and 18 variants.
Sizes 3.437" to 4.813" without Safety Spring (Product Code 10) are Special Order; Rebco supplies Product Code 18 as the default for those sizes.
Lock Mandrels with Safety Spring, and Interference Hold Down are available, see PRODUCT17 and 18
Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision)
NOTE: Lock Mandrels Sizes 3.437" - 4.813" without Safety Spring (Product 18) are Special Order Locks. ALL Lock Mandrels are available in a variety of Materials, suitable for down-hole conditions.
TECHNICAL DATA
NIPPLE SEAL BORE | 1.500” | 1.710” | 1.781” | 1.875” | 2.000” |
ASSEMBLY NUMBER | 10131015030 | 10131017130 | 10131017830 | 10131018730 | 10131020030 |
ENGINEERING DATA | |||||
LOCK ID | .62” | .75” | .88” | .88” | .88” |
PACKING OD | 1.500” | 1.710” | 1.781” | 1.875” | 2.000” |
LENGTH | 13.4” | 13.4” | 13.4” | 13.4” | 13.4” |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy |
BOTTOM THREAD | 1 1/8” - 16 | 1 1/8” - 16 | 1 3/8” - 14 | 1 3/8” - 14 | 1 3/8” - 14 |
RUNNING TOOL - ROTR | 41132015000 | 41132017100 | 41132017800 | 41132018700 | 41132020000 |
PULLING TOOL - ROTGR | 40051315000 | 40051315000 | 40051317800 | 40051318700 | 40051318700 |
NIPPLE SEAL BORE | 2.125” | 2.188” | 2.313” | 2.562” | 2.750” |
ASSEMBLY NUMBER | 10131021230 | 10131021830 | 10131023130 | 10131025630 | 10131027530 |
ENGINEERING DATA | |||||
LOCK ID | .88” | 1.12” | 1.12” | 1.38” | 1.50” |
PACKING OD | 2.125” | 2.188” | 2.313” | 2.562” | 2.750” |
LENGTH | 13.4” | 13.8” | 13.8” | 13.3” | 13.7” |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy |
BOTTOM THREAD | 1 3/8” - 14 | 1 3/4” - 12 | 1 3/4” - 12 | 2”-12 SLB | 2 1/4”-12 SLB |
RUNNING TOOL - ROTR | 41132021200 | 41132021800 | 41132023100 | 41132025600 | 41132027500 |
PULLING TOOL - ROTGR | 40051318700 | 40051321800 | 40051323100 | 40051323100 | 40051327500 |
NIPPLE SEAL BORE | 2.813” | 2.875” | 3.125” | 3.437” | 3.688” |
ASSEMBLY NUMBER | 10131028130 | 10131028730 | 10131031230 | 10131034330 | 10131036830 |
ENGINEERING DATA | |||||
LOCK ID | 1.50” | 1.50” | 1.94” | 1.94” | 2.38” |
PACKING OD | 2.813” | 2.875” | 3.125” | 3.437” | 3.688” |
LENGTH | 13.7” | 13.7” | 13.7” | 14.2” | 14.37” |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy |
BOTTOM THREAD | 2 1/4”-12 SLB | 2 1/4”-12 SLB | 2 5/8”-12 SLB | 2 3/4”-12 SLB | 3 1/16”-12 SLB |
RUNNING TOOL - ROTR | 41132028100 | 41132028700 | 41132031200 | 41132034300 | 41132036800 |
PULLING TOOL - ROTGR | 40051327500 | 40051327500 | 40051331200 | 40051331200 | 40051336804 |
NIPPLE SEAL BORE | 3.813” | 4.125” | 4.313” | 4.562” | 4.813” |
ASSEMBLY NUMBER | 10131038130 | 10131041230 | 10131043130 | 10131045630 | 10131048130 |
ENGINEERING DATA | |||||
LOCK ID | 2.12” | 2.75” | 2.62” | 2.85” | 3.12” |
PACKING OD | 3.813” | 4.125” | 4.313” | 4.562” | 4.813” |
LENGTH | 14.77” | 14.38” | 14.39” | 14.92” | 14.6” |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy |
BOTTOM THREAD | 3 1/16”-12 SLB | 3 1/4”-12 SLB | 3 1/4”-12 SLB | 3 3/4”-12 SLB | 4”-12 SLB |
RUNNING TOOL - ROTR | 41132038100 | 41132041200 | 41132043100 | 41132045600 | 41132048100 |
PULLING TOOL - ROTGR | 40051336804 | 40051436804 | 40051336804 | 40051345600 | 40051345600 |
Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision)
RELATED TOOLS
Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.