Valve ROTXX Plug Choke Assembly
Rebco ROTXX Plug Choke Assembly, when landed in Type ROTX Landing Nipple, of the same size, will plug off the nipple and tubing. The Plug Choke is capable of holding pressure differentials from above or below.
NOTE: Valve ROTXX Plug Choke Assembly is made up of ROTX Lock Mandrel (PRODUCT CODE 10, 17, and/or 18) and ROTX Equalizing Valve Sub-Assembly with a Cap (PRODUCT CODE 20).
Product Code: 20
Applications
Plugging and pressure isolation from both above and below in ROTX Landing Nipples, across seal bore sizes of 1.500" through 4.562."
Small-bore completions beginning at 1.500" seal bore, where the ROTX nipple profile is the completion standard
Single-run plug setting for efficient wireline operations
H2S service environments requiring Norm Alloy construction
Key Benefits
The smallest available seal bore coverage in the valve-type plug choke family, starting at 1.500", addresses velocity strings and small-diameter production tubing not served by the ROTRR series.
Single-run setting reduces the number of wireline trips required.
ROTX-specific Running and Pulling Tools, Equalizing Prongs, and Check Set Tools are fully specified per size in the engineering data tables.
Bidirectional pressure holding provides complete tubing isolation.
Available in a variety of materials to suit downhole conditions.
The Plug requires ONE run to be set.
Norm Alloy is suitable for H2S Service (NACE MR-01-2 75, Latest Revision)
Plug Chokes are available in a variety of Materials, suitable for down-hole conditions.
TECHNICAL DATA
NIPPLE SEAL BORE SIZE | 1.500” | 1.625” | 1.875” | 2.313” | |
ASSEMBLY NUMBER | 20181815030 | 20181816230 | 20181818730 | 20181823130 | |
ENGINEERING DATA | |||||
MAXIMUM OD (NO-GO) | 1.495” | 1.620” | 1.870” | 2.307” | |
LOCK MANDREL FISHING NECK ID | 1.06” | 1.06” | 1.38” | 1.81” | |
RUNNING TOOL - ROTX | 41182015000 | 41182016200 | 41182018700 | 41182023100 | |
PULLING TOOL - ROTGR | 40051315000 | 40051315000 | 40051318700 | 40051323100 | |
EQUALIZING PRONGS | RUNNING | 49121324 | 4912496 | 4912505 | 4911793 |
PULLING | 49122037 | 49122035 | 49122044 | 49122078 | |
LENGTH | 22.75” | 22.75” | 20.28” | 20.75” | |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | |
ACCESSORY (PRODUCT CODE 41): | |||||
CHECK SET TOOL | 4102181500 | 4102181500 | 4102181870 | 4102182310 | |
NIPPLE SEAL BORE SIZE | 2.750” | 2.813” | 2.875” | 3.313” | |
ASSEMBLY NUMBER | 20181827530 | 20181828130 | 20181828730 | 20181833130 | |
ENGINEERING DATA | |||||
MAXIMUM OD (NO-GO) | 2.745” | 2.808” | 2.870” | 3.307 ” | |
LOCK MANDREL FISHING NECK ID | 2.31” | 2.31” | 2.31” | 2.62” | |
RUNNING TOOL - ROTX | 41182027500 | 41182028100 | 41182028700 | 41182033100 | |
PULLING TOOL - ROTGR | 40051327500 | 40051327500 | 40051327500 | 40051331202 | |
EQUALIZING PRONGS | RUNNING | 4912599 | 4912599 | 4912599 | 4911762 |
PULLING | 49122043 | 49122043 | 49122043 | 4911763 | |
LENGTH | 20.77” | 20.77” | 20.77” | 23.8” | |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | |
ACCESSORY ((PRODUCT CODE 41): | |||||
CHECK SET TOOL | 4102183000 | 4102183000 | 4102183000 | 4102183310 | |
NIPPLE SEAL BORE SIZE | 3.688” | 3.813” | 4.313” | 4.562” | |
ASSEMBLY NUMBER | 20181836830 | 20181838130 | 20181843130 | 20181845630 | |
ENGINEERING DATA | |||||
MAXIMUM OD (NO-GO) | 3.682” | 3.807” | 4.307” | 4.556” | |
LOCK MANDREL FISHING NECK ID | 3.12” | 3.12” | 3.12” | 4.00” | |
RUNNING TOOL - ROTX | 41182036800 | 41182038100 | 41182043100 | 41182045600 | |
PULLING TOOL - ROTGR | 40051336804 | 40051336804 | 40051336804 | 40051345600 | |
EQUALIZING PRONGS | RUNNING | 4911826 | 4911640 | 4911640 | 4911805 |
PULLING | 4911827 | 4911641 | 4911641 | 4911944 | |
LENGTH | 21.88” | 21.88” | 22.0” | 23.99” | |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | |
ACCESSORY ((PRODUCT CODE 41): | |||||
CHECK SET TOOL | 4102183680 | 4102183810 | 4102184310 | 4102184560 | |
* Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision)
RELATED TOOLS
Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.