Glossary ROTF & ROTM (Top No-Go) Lock Mandrel Sub-Assembly ROTF & ROTM (Top No-Go) Lock Mandrel Sub-Assembly The Rebco ROTF and ROTM are Top No-Go Lock Mandrel Sub-Assemblies designed to position and secure wireline retrievable downhole equipment in BF and BJ Landing Nipples, and the BL Sliding Sleeve, in the larger bore size range of 2.750" through 3.812". Like the ROTG and ROTN , these locks feature internal Fishing Necks that provide large flow areas and use Collet-type locking fingers to resist upward movement, while the No-Go shoulders resist downward movement. The ROTF is essentially the ROTM sub-assembly without the Packing Unit and Packing Mandrel; the ROTM includes the full Packing Unit for applications requiring a tubing pack-off. Available in nominal 3 1/2" tubing with seal bores of 2.750" and 2.812", and nominal 4 1/2" tubing with seal bores of 3.688", 3.750", and 3.812", the ROTF and ROTM extend the high-volume completion lock range into the larger bore sizes. The ROTF uses a Box thread bottom connection, and the ROTM uses a Pin thread; both must be specified when ordering. Running and pulling operations for both are performed using the ROTGS Running/Pulling Tool, with the ROTM -specific prong used for engagement. All sizes are constructed from Norm Alloy. How to Order: Product Code 10. Specify lock type ( ROTF for no pack-off, ROTM for pack-off), nominal tubing size (3 1/2" or 4 1/2"), seal bore size, thread type (Box for ROTF , Pin for ROTM ), and material. Back to the Tool page PDF download ROTF & ROTM (Top No-Go) Lock Mandrel Sub-Assembly ROTF & ROTM (Top No-Go) Lock Mandrel Sub-Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

AO Rope Sockets Tool String AO Rope Sockets AO Rope Sockets Rebco AO Rope Sockets are recommended to be used with .066" to .105" diameter Single Strand Wire. The Wireline should be passed through the Body, Spring and Support, before being wrapped tightly around the groove of the Disc. Product Code: 100 REQUEST A QUOTE DOWNLOAD DATASHEET AO Rope Sockets AO Rope Sockets Click here Applications Primary wireline-to-tool string connection for single-strand slickline operations Used as an emergency release point when positioned mid-string with a pulling tool Suitable for well pressures and conditions requiring a controlled wire parting point Key Benefits Deliberate weak-point design protects the wireline uphole during stuck-string situations. Available in a wide range of ODs from ⅜" to 2½" to suit all tubing sizes Alloy steel construction with special material options for sour or corrosive well environments Compatible with Rebco & industry standard threaded connections Note: 3/8" and 1/2" AO Rope Sockets are offered with Set Screws Only TECHNICAL DATA NOMINAL SIZE 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1 1/4” ASSEMBLY NUMBER 10000200370 10000200500 10000200620 10000200750 10000200870 10000201000 10000201250 ENGINEERING DATA: FISHING NECK OD .375 .500” .500” .687” .750” 1.000” 1.187” BOX THREAD CONNECTION 1/4” - 20 3/8” - 16 3/8” - 16 1/2” - 13 5/8” - 11 5/8” - 11 15/16” - 10 MAXIMUM OD .38” .50” .63” .75” .88” 1.00” 1.25” LENGTH 4.06” 4.50” 4.50” 3.12” 3.12” 6.88” 5.56” MATERIAL Alloy Alloy Alloy Alloy Alloy Alloy Alloy NOMINAL SIZE 1 1/2” 1 3/4” 1 7/8” 2” 2 1/8” 2 1/4” 2 1/2” ASSEMBLY NUMBER 10000201500 10000201750 10000201870 10000202000 10000202120 10000202250 10000202500 ENGINEERING DATA: FISHING NECK OD 1.375” 1.750” 1.750” 1.750” 1.750” 1.750” 2.313” BOX THREAD CONNECTION 15/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 9/16” - 10 MAXIMUM OD 1.38” 1.75” 1.88” 2.00” 2.12” 2.25” 2.50” LENGTH 5.56” 5.56” 5.56” 5.56” 5.56” 5.56” 6.50” MATERIAL Alloy Alloy Alloy Alloy Alloy Alloy Alloy RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

(under process) | Wireline , Slickline , and downhole Tools SURFACE EQUIPMENT DOWNLOAD PDF Surface Equipment

A Wireline Tool String is made up of set Tools (Work String) to do specific Wireline operations down-hole. | Wireline , Slickline , and downhole Tools TOOL STRING DOWNLOAD PDF Tool String

ROTPX Equalizing Prong and Valve Sub-Assembly Equalizing Sub-Assemblies ROTPX Equalizing Prong and Valve Sub-Assembly ROTPX Equalizing Prong and Valve Sub-Assembly Rebco ROTPX Equalizing Prong and Valve Sub-Assembly, when attached to ROTX and/or ROTXN Lock Mandrel Assembly, converts the Lock Mandrel to a Plug Choke, with equalizing device, capable of holding pressure differentials from above or below. Product Code: 24 REQUEST A QUOTE DOWNLOAD DATASHEET ROTPX Equalizing Prong and Valve Sub-Assembly ROTPX Equalizing Prong and Valve Sub-Assembly Click here Applications Converting ROTX and ROTXN Lock Mandrel Assemblies into bidirectional pressure-holding Plug Chokes with integrated equalizing capability, in nipple seal bores from 1.500" through 4.562." Completions requiring active pressure management from both above and below the set ROTX or ROTXN lock mandrel Small-bore completions beginning at 1.500" nipple seal bore, where bidirectional plug choke capability is required H2S environments requiring Norm Alloy construction per NACE MR-01-75 Key Benefits Bidirectional pressure-holding capability converts the ROTX or ROTXN lock mandrel into a full-plug choke, significantly expanding its functional role beyond simple anchoring and equalization. Covers the complete ROTX and ROTXN lock mandrel size range from 1.500" through 4.562", providing a ROTPX option for every lock mandrel size in the ROTX family. The Prong can be run and pulled independently of the lock mandrel, allowing the plug choke function to be added or removed in a single wireline trip without disturbing the set lock mandrel. Norm Alloy construction for H2S service; a variety of materials available to suit well conditions. Norm Alloy is suitable for H 2 S Service (NACE MR-01-75, Latest Revision) Equalizing Sub-Assemblies are available in variety of Materials to suit Well Conditions. TECHNICAL DATA NIPPLE SEAL BORE 1.500” 1.625” 1.875” 2.313” SUB-ASSEMBLY NUMBER 24111815031 24111816231 24111818731 24111823131 ENGINEERING DATA MAXIMUM OD (NO-GO) 1.495” 1.620” 1.870” 2.307” BOX THREAD CONNECTION 1 1/8” - 16 1 1/8” - 16 1 3/8” - 14 1 3/4” - 12 PRONG FISHING NECK SIZE 1.000” 1.000” 1.375” 1.375” PRONG LENGTH 26.0” 26.0” 23.38” 23.46” LENGTH 29.87” 29.87” 26.46” 26.56” ‘V’ PACKING OD .630” .630” .938” 1.250” PRONG RUNNING / PULLING TOOL 400703021375 400703021375 4014012000 4014012000 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy NIPPLE SEAL BORE 2.750” 2.813” 2.875” 3.313” ASSEMBLY NUMBER 24111827530 24111828130 24111828730 24111833130 ENGINEERING DATA MAXIMUM OD (NO-GO) 2.745” 2.808” 2.870” 3.307” BOX THREAD CONNECTION 2 1/4” – 12 SLB 2 1/4” – 12 SLB 2 1/4” – 12 SLB 2 3/4” – 12 SLB PRONG FISHING NECK SIZE 1.375” 1.375” 1.375” 1.375” PRONG LENGTH 25.18” 25.18” 25.18” 25.18” LENGTH 28.13” 28.13” 28.13” 28.13” ‘V’ PACKING OD 1.500” 1.500” 1.500” 1.500” PRONG RUNNING / PULLING TOOL 4014012000 4014012000 4014012000 4014012000 MATERIAL * Norm Alloy * Norm Alloy * Norm Alloy * Norm Alloy * NIPPLE SEAL BORE 3.688” 3.813” 4.313” 4.562” ASSEMBLY NUMBER 24111836830 24111838130 24111843130 24111845630 ENGINEERING DATA MAXIMUM OD (NO-GO) 3.682” 3.807” 4.307” 4.556” BOX THREAD CONNECTION 3 1/16” – 12 SLB 3 1/16” – 12 SLB 3 1/4” – 12 SLB 3 3/4” – 12 SLB PRONG FISHING NECK SIZE 2.313” 2.313” 3.125” 3.125” PRONG LENGTH 34.84” 34.84” 39.04” 39.04” LENGTH 37.15” 36.95” 41.2” 41.23” ‘V’ PACKING OD 1.500” 1.500” 2.313” 2.313” PRONG RUNNING / PULLING TOOL 4014013000 4014013000 4014014000 4014014000 MATERIAL * Norm Alloy * Norm Alloy * Norm Alloy * Norm Alloy * Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision) RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

CO Rope Sockets Tool String CO Rope Sockets CO Rope Sockets Rebco CO Rope Sockets are designed for use with small, stranded lines up to 5/16" diameter. CO Rope Sockets are made up of a: Body, Bottom Sub, Carriage, Slips and Set Screw. The Slips are designed to cause the line to break under severe loading at a specific percentage of the full line tensile strength. Product Code: 100 REQUEST A QUOTE DOWNLOAD DATASHEET CO Rope Sockets CO Rope Sockets Click here Applications Braided/stranded line-to-tool string connection where controlled line parting protection is required Operations in high-pressure wells where stuck-string risk is elevated Any application where preserving a retrievable fishing neck is operationally critical Key Benefits Calibrated slip release protects wireline from uncontrolled parting uphole Multiple calibration options available to match line strength and well conditions Clean fishing neck left downhole in all release scenarios for straightforward recovery Available 1¼"–2½" OD If during the downhole operations the Tool String gets stuck, the operator is assured that the line will break at the Rope Socket, rather than up-hole, allowing retrieval of the Wireline. CD Rope Sockets are available - with 'QLS' Rebco RQLD bottom connection. Must be ordered by Wire Size in use and Slips (80% is most common). Assembly Number is determined by Wire Size, See Wire Size Chart TECHNICAL DATA NOMINAL SIZE 1 1/4” 1 1/2” 1 3/4” 1 7/8” 2 1/8” 2 1/2” ASSEMBLY NUMBER 1000220125_ 1000220150_ 1000220175_ 1000220187_ 1000220212_ 1000220250_ ENGINEERING DATA: FISHING NECK OD 1.375” 1.375” 1.750” 1.750” 1.750” 2.313” BOX CONNECTION 15/16” - 10 15/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 MAXIMUM OD 1.25” 1.50” 1.75” 1.88” 2.12” 2.50” LENGTH 8.50” 8.50” 8.50” 8.50” 8.50” 8.50” MATERIAL Alloy Alloy Alloy Alloy Alloy Alloy RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

ROTAO Mechanical Tubing Perforator Assembly Service Tools ROTAO Mechanical Tubing Perforator Assembly ROTAO Mechanical Tubing Perforator Assembly Rebco ROTAO Mechanical Tubing Perforator is used to perforate the tubing wall mechanically by manipulating the use of the Wireline Tool String. Once set, progressive upward jarring force, the Punch penetrates the Tubing wall, thus creating the hole. At cycle end, the Punch is withdrawn to its starting position, triggering the safety locking mechanism, the Catch to lock the Perforator for safe removal. Product Code: 62 REQUEST A QUOTE DOWNLOAD DATASHEET ROTAO Mechanical Tubing Perforator Assembly ROTAO Mechanical Tubing Perforator Assembly Click here Applications Creating controlled flow ports in production tubing to establish tubing-annulus communication Opening flow paths for chemical injection or scale inhibitor squeeze treatments Creating pressure equalization ports in isolated tubing intervals Installing annulus access ports for gas lift valve replacement or monitoring Key Benefits Creates precisely sized, depth-controlled perforations without explosive or shaped-charge systems Multiple perforations can be placed in a single wireline trip. No explosive handling, transportation permits, or specialized crew required Works with standard wireline jar-and-stem system; no specialized surface equipment required. Caution: Downward Jarring will break the Punch. Product Code: 62 TECHNICAL DATA NOMINAL SIZE 2” (2 3/8”) 2 1/2” (2 7/8”) ASSEMBLY NUMBER 62002024 62002025 62002011 62002020 Reference: TUBING Size 2 3/8” 2 3/8” 2 7/8” 2 7/8” Weight - (lbs/ft.) 4 - 4.7 5.3 - 5.9 7.9 6.4 - 6.5 Minimum Tubing Drift 1.906” 1.773” 2.229” 2.347” ENGINEERING DATA: MAXIMUM OD BODY 1.84” 1.72” 2.12” 2.20” EXTENDED PUNCH 2.25” 2.141” 2.688” 2.781” THREAD CONNECTION PIN - BOX 15/16” - 10 15/16” - 10 15/16” - 10 15/16” - 10 FISHING NECK OD 1.375” 1.375” 1.375” 1.375” LENGTH CLOSED 27.03” 27.03” 29.62” 29.62” EXTENDED 38.81” 38.81” 44.31” 44.31” STROKE 11.78” 11.78” 14.69” 14.69” HOLE SIZE 3/8” (.375”) 3/8” (.375”) 3/8” (.375”) 3/8” (.375”) MATERIAL Alloy Alloy Alloy Alloy ACCESSORIES: PROTECTIVE CASE (Not Shown) 620002200 620002250 ANCHOR TYPES COLLAR STOP - ‘CS’ See this Section Page II-22 See this Section Page II-22 SLIP STOP - ‘TS’ NOMINAL SIZE 3 1/2” 4 1/2” ASSEMBLY NUMBER 6200201 62002026 62002046 62002045 Reference: TUBING Size 3 1/2” 3 1/2” 4 1/2” 4 1/2” Weight - (lbs/ft.) 7.7 - 9.2 10.2 - 12.7 11.6 12.6 Minimum Tubing Drift 2.797” 2.625” 3.927” 3.833” ENGINEERING DATA: MAXIMUM OD BODY 2.69” 2.81” 3.66” 3.75” EXTENDED PUNCH 3.344” 3.344” 4.40” 4.37” THREAD CONNECTION PIN - BOX 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 FISHING NECK OD 2.313” 2.313” 2.313” 2.313” LENGTH CLOSED 33.50” 33.50” 31.83” 31.83” EXTENDED 51.81” 51.81” 46.47” 46.47” STROKE 18.31” 18.31” 14.64” 14.64” HOLE SIZE 7/16” (.437”) 7/16” (.437”) 1/2” (.500”) 1/2” (.500”) MATERIAL Alloy Alloy Alloy Alloy ACCESSORIES: PROTECTIVE CASE (Not Shown) 620002300 620002400 ANCHOR TYPES COLLAR STOP - ‘CS’ See this Section Page II-22 See this Section Page II-22 SLIP STOP - ‘TS’ RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

Glossary AD Stem (Weight Bar) AD Stem (Weight Bar) The Rebco AD Solid Bar Stem is the RQLD quick-lock version of the Rebco A , providing all the same weight characteristics with the added operational efficiency of Rebco 's double-shoulder Quick Lock System connection. Designed for multi-run operations that require frequent assembly and breakdown at the wellhead. Available in RQLD connections, 1½"–2½" OD. Back to the Tool page PDF download AD Stem (Weight Bar) AD Stem (Weight Bar) Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

FO Collar Stop Tool Assembly Service Tools FO Collar Stop Tool Assembly FO Collar Stop Tool Assembly The Rebco FO Collar Stop Tool is engineered to set securely in both API upset and non-upset tubing collar recess. The tool is run to the desired depth and then pulled upward to trip the springs, allowing the Collet to expand into the tubing collar. A downward jarring action on the fishing neck disengages the Running Tool while simultaneously locking the Collet into place. Product Code: 110 REQUEST A QUOTE DOWNLOAD DATASHEET FO Collar Stop Tool Assembly FO Collar Stop Tool Assembly Click here Applications Providing a positive, depth-referenced landing point for wireline tools requiring a fixed operating elevation Setting plugs, valves, or isolation devices at collar-referenced depths Establishing a platform for tools that require a reactive footing for their actuation mechanism Key Benefits Seats positively in collar recesses, providing a reliable, repeatable depth reference. Set by jar-down, released by jar-up, a simple field operation requiring no special tools Available in all standard tubing sizes and threaded connection types A key feature of Rebco's FO Collar Stop is its weld-free construction - the Collet is machined from a single piece of stock material for enhanced strength, reliability, and durability. Product Code: 110 Special OD Collar Stop to go through 2.750" Seal Bore Nipple TECHNICAL DATA NOMINAL SIZE 1 1/4” 1 1/2” 2 3/8” 2 7/8” ASSEMBLY NUMBER 11025201 11025202 11025203 11025204 ENGINEERING DATA: MAXIMUM OD RUNNING POSITION 1.09” 1.31” 1.75” 2.19” SET POSITION 1.62” 1.88” 2.38” 2.81” LENGTH RUNNING LENGTH 13 3/4” 13 3/4” 14 1/8” 14 1/8” SET LENGTH 10.17” 10.19” 10.66” 10.61” FISHING NECK 1.000” 1.000” 1.375” 1.750” MIN ID .47” .62” .88” 1.12” MATERIAL Alloy Alloy Alloy Alloy RUNNING TOOL TYPE F 41251 41251 41252 41252 TYPE ROTSB 4014011250 4014011250 4014012000 4014012500 PULLING TOOL TYPE ROTJDC 400703021370 400703021370 400703022000 400703022500 NOMINAL SIZE 3 1/2” * 3 1/2” 4 1/2” ASSEMBLY NUMBER 11025205 11025206 11025207 ENGINEERING DATA: MAXIMUM OD RUNNING POSITION 2.68” 2.75” 3.75” SET POSITION 3.38” 3.38” 4.25” FISHING NECK 2.313” 2.313” 2.313” MIN ID 1.62” 1.62” 1.62” MATERIAL Alloy Alloy Alloy RUNNING TOOL TYPE F 41253 41253 41253 TYPE ROTSB 4014013000 4014013000 4014013000 PULLING TOOL TYPE ROTJDC 400703023000 400703023000 400703023000 * Special OD Collar Stop to go through 2.750” Seal Bore Nipple RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

CGO & Additional Types of Rope Sockets Tool String CGO & Additional Types of Rope Sockets CGO & Additional Types of Rope Sockets Rebco CGO Rope Sockets are designed for use with small stranded lines, up to 1/4" diameter. Similar in design as Rebco CO Rope Sockets, the Tool has an additional swivel bottom. Product Code: 100 REQUEST A QUOTE DOWNLOAD DATASHEET CGO & Additional Types of Rope Sockets CGO & Additional Types of Rope Sockets Click here Applications Stranded line connections where both slip-release protection and wire-twist prevention are required Operations in wells with extended rotational tool string movement Key Benefits Combines percentage-slip protection and swivel function in one component Prevents braid unwinding and strand breakage from torsional loading Compact design reduces overall tool string length versus separate components Additional Types of Rope Sockets available: GO Rope Socket Assembly: 1000520_Single Conductor Cable Head SA Rope Socket Assembly: 1001400_Swabbing Rope Sockets for Babbitt fill Applications Swabbing operations requiring connection of ½"–9/16" swabbing line to the tool string Liquid unloading operations on oil and gas wells Key Benefits Babbitt-filled grip accommodates larger swabbing line diameters not suited to standard rope sockets. Purpose-built for swabbing service, not interchangeable with standard slickline rope sockets Robust construction for the cyclic loads of repeated swabbing runs Definitions (view more >>>) TECHNICAL DATA RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.