RMF Pulling Tool Assembly Pulling Tools RMF Pulling Tool Assembly RMF Pulling Tool Assembly Rebco RMF Pulling Tool is a Multi-Functional Tool design, sometimes called a 'Universal Tool'. The Tool is used to run and retrieve Wireline set devices with external Fishing Necks. Product Code: 40 Read More DOWNLOAD DATASHEET REQUEST A QUOTE RMF Pulling Tool Assembly RMF Pulling Tool Assembly Click here TOOL APPLICATION Applications Retrieving external fishing neck devices in wells where the preferred release direction is uncertain Operations where both upward and downward jar release attempts may be required on the same run Reducing the risk of being unable to release from a stuck device due to commitment to a single release direction Key Benefits Only the pulling tool in the Rebco lineup can shear its release pin in either the upward or downward direction. Eliminates the need to trip out of the hole to switch between shear-up and shear-down tools when the initial release attempt fails Provides maximum operational flexibility in unpredictable or challenging wellbore conditions Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOMINAL SIZE 2” 2 1/2” 3” ASSEMBLY NUMBER 4016202000 4016202500 4016203000 ENGINEERING DATA: MAXIMUM OD 1.86” 2.25” 2.80” PIN THREAD CONNECTION 15/16” - 10 15/16” - 10 1 1/16” - 10 FISHING NECK OD 1.375” 1.375” 1.750” BOTTOM THREAD (PRONG) 1/2” - 13 1/2” - 13 5/8” - 11 WILL ENGAGE FISHING NECK OD 1.375” 1.750” 2.313” REACH SHORT REACH 1.25” 1.30” 1.38” MEDIUM REACH 2.05” 2.10” 2.20” LONG REACH 2.60” 2.60” 2.70” LENGTH SHEAR-UP MODE 19.46” 20.25” 21.41” SHEAR-DOWN MODE 22.40” 23.63” 23.77” MATERIAL Alloy Alloy Alloy ACCESSORY: Pinning Tool Assembly 16711004 16711004 16711005 RELATED TOOLS The Tool can be run in the Shear-Up to release or Shear-Down to release mode. Single Core can be adjusted to the desired Reach: Short, Medium or Long Reach.

EO Roller Stem (Weight Bar) Tool String EO Roller Stem (Weight Bar) EO Roller Stem (Weight Bar) Rebco EO Roller Stems are with Threaded Connections - (Sucker Rod Type) Product Code: 101 Read More DOWNLOAD DATASHEET REQUEST A QUOTE EO Roller Stem (Weight Bar) EO Roller Stem (Weight Bar) Click here TOOL APPLICATION Applications Deviated and directional wellbores where tool string drag prevents reaching total depth Corkscrew tubing conditions where the conventional stem hangs up Any well where friction losses are reducing the effectiveness of jarring operations Key Benefits Rollers reduce drag against the tubing wall, improving reach and jar action in deviated wells. Available in 2, 3, or 4 roller configurations per section to suit deviation severity Roller material and OD can be customized; nylon rollers are available for coated tubing. Available in 2 ft, 3 ft, and 5 ft lengths for precise weight management Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA ASSEMBLY PART NUMBER NOMINAL SIZE (OD) ENGINEERING DATA LENGTH THREAD CONNECTIONS FISHING NECK NO * ROLLERS ROLLER OD * 10104201252 1 1/4” 24” 15/16” - 10 1.187” 2 1.50” 10104201253 36” 3 10104201255 60” 4 10104201502 1 1/2” 24” 1.375” 2 1.75” 10104201503 36” 3 10104201505 60” 4 10104201752 1 3/4” 24” 1 1/16” - 10 1.750” 2 2.20” 10104201753 36” 3 10104201755 60” 4 10104201872 1 7/8” 24” 2 10104201873 36” 3 10104201875 60” 4 10104202122 2 1/8” 24” 2 2.75” 10104202123 36” 3 10104202125 60” 4 10104202502 2 1/2” 24” 2.313” 2 3.25” 10104202503 36” 3 10104202505 60” 4 RELATED TOOLS

ROTX Landing Nipple Landing Nipples ROTX Landing Nipple ROTX Landing Nipple The Rebco ROTX Landing Nipple is a selective landing profile for positioning, sealing, and locking compatible wireline-deployed flow-control equipment within standard-weight production tubing. Multiple ROTX nipples with the same internal profile can be installed at selected depths, allowing a compatible selective running tool to place, retrieve, or relocate equipment at the required position in the completion string. Product Code: 11 Read More DOWNLOAD DATASHEET REQUEST A QUOTE ROTX Landing Nipple ROTX Landing Nipple Click here TOOL APPLICATION Applications Positions compatible wireline flow-control devices at selected depths in the production tubing string. Supports the installation and retrieval of compatible blanking plugs, check valves, safety valves, and downhole flow-control equipment. Provides landing locations for pressure and temperature gauge hangers. Allows compatible equipment to be moved to another X nipple if completion requirements or well conditions change. Key Benefits Selective setting: Multiple X nipples can be installed in the same tubing string, allowing compatible tools to be placed at the required depth. Large bore design: Helps minimize flow restriction through the completion. Simplified intervention: Compatible tools can be deployed, retrieved, and repositioned by slickline without pulling the tubing, where operating conditions permit. Common internal profile: Supports a consistent landing interface across multiple nipple locations. Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA Tubing OD Size NIPPLE - ‘ROTX’ NIPPLE - ‘ROTXN’ Seal Bore Seal Bore No-Go ID Inches mm Inches mm Inches mm Inches mm Inches mm 1.660 42.16 1.250 31.75 1.250 31.75 1.250 31.75 1.135 28.83 1.900 48.26 1.500 38.1 1.500 38.1 1.500 38.1 1.448 36.78 2 1/16 52.37 1.625 41.28 1.625 41.28 1.625 41.28 1.536 39.01 2 3/8 60.33 1.875 47.63 1.875 47.63 1.875 47.63 1.791 45.49 2 7/8 73.02 2.313 58.75 2.312 58.75 2.312 58.75 2.205 56.01 3 1/2 88.9 2.750 69.85 2.750 69.85 2.750 69.85 2.635 66.93 2.813 71.45 2.813 71.45 2.813 71.45 2.666 67.72 2.875 73.03 2.875 73.03 2.875 73.03 2.760 70.10 4 101.60 3.313 84.15 3.313 84.15 3.313 84.15 3.135 79.63 4 1/2 114.30 3.813 96.85 3.813 96.85 3.813 96.85 3.725 94.62 5 127.0 4.313 109.55 4.313 109.55 4.313 109.55 3.987 101.27 5 1/2 139.70 4.562 115.87 4.562 115.87 4.562 115.87 4.455 113.16 4.813 122.25 4.813 122.25 4.813 122.25 4.725 120.02 7 177.80 5.963 151.46 5.963 151.46 5.963 151.46 5.770 146.56 7 5/8 193.68 6.125 155.58 6.125 155.58 6.125 155.58 5.937 150.80 RELATED TOOLS ROTXN Landing Nipple VIEW ROTX Lock Mandrel Assembly VIEW Valve ROTXX Plug Choke Assembly VIEW Equalizing Prong ROTPXX Plug Choke Assembly VIEW

Equalizing Prong ROTPRR Plug Choke Assembly Plug Assemblies Equalizing Prong ROTPRR Plug Choke Assembly Equalizing Prong ROTPRR Plug Choke Assembly Rebco Equalizing Prong ROTPRR Plug Choke Assembly, when landed in ROTR Landing Nipple , of the same size, will plug off the nipple and tubing. The Plug Choke is capable of holding pressure differentials from above or below. NOTE: Equalizing Prong ROTPRR Plug Choke Assembly is made up of ROTR Lock Mandrel (PRODUCT CODE 10, 17, and/or 18) and ROTPR Equalizing Prong and Sub-Assembly with a Cap (PRODUCT CODE 20) . Product Code: 21 Read More DOWNLOAD DATASHEET REQUEST A QUOTE Equalizing Prong ROTPRR Plug Choke Assembly Equalizing Prong ROTPRR Plug Choke Assembly Click here TOOL APPLICATION Applications Plugging and bidirectional pressure holding in ROTR Landing Nipples across seal bore sizes of 1.710" through 4.562", with larger sizes available on inquiry. Completions requiring a more positive prong-seated pressure seal than the valve-type ROTRR provides Applications where independent prong running allows the plug body to be confirmed set before the pressure-holding element is deployed, reducing the risk of a failed plug installation Large-bore and Safety Valve nipple sizes (5.875" and 5.963") available on inquiry H2S service environments requiring Norm Alloy construction Key Benefits The Equalizing Prong seated V-Packing provides a robust, mechanically positive pressure seal from both above and below, suited to demanding differential pressure applications. Running the Check Set Tool before the Prong provides a two-stage confirmation that the plug body is correctly seated before the pressure element is committed, reducing the risk of failed installations in critical wells. Equalizing Prong lengths can be custom-ordered to suit specific tool string requirements. Covers sizes up to 5.963" on inquiry, encompassing the largest completion nipple profiles in the Rebco range. Available in a variety of materials to suit downhole conditions. Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NIPPLE SEAL BORE SIZE 1.710” 1.781” 1.875” 2.000” ASSEMBLY NUMBER 2111131317130 2111131317830 2111131318730 2111131320030 ENGINEERING DATA MAXIMUM OD (NO-GO) 1.705” 1.776” 1.870” 1.995” OVER ALL LENGTH 26.0” 26.0” 26.0” 26.0” RUNNING TOOL - ROTR 41132017100 41132017800 41132018700 41132020000 PULLING TOOL - ROTGR 40051315000 40051317800 40051318700 40051318700 EQUALIZING PRONGS FISHING NECK SIZE 1.187” 1.187” 1.187” 1.187” RUNNING/PULLING TOOL 4014011500 4014011500 4014011500 4014011500 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102131710 4102132000 4102132000 4102132000 NIPPLE SEAL BORE SIZE 2.125” 2.188” 2.313” 2.562” ASSEMBLY NUMBER 2111131321230 2111131321830 2111131323130 2111131325630 ENGINEERING DATA MAXIMUM OD (NO-GO) 2.120” 2.183” 2.308” 2.557” OVER ALL LENGTH 26.0” 26.56”” 26.56” 32.53” RUNNING TOOL - ROTR 41132021200 41132021800 41132023100 41132025600 PULLING TOOL - ROTGR 40051318700 40051321800 40051323100 40051323100 EQUALIZING PRONGS FISHING NECK SIZE 1.187” 1.375” 1.375” 1.375” RUNNING/PULLING TOOL 4014011500 4014012000 4014012000 4014012000 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102132000 4102132180 4102132310 4102132560 NIPPLE SEAL BORE SIZE 2.750” 2.813” 3.437” 3.688” ASSEMBLY NUMBER 2111131327530 2111131328130 2111131334330 2111131336830 ENGINEERING DATA MAXIMUM OD (NO-GO) 2.745” 2.808” 3.432” 3.683” OVER ALL LENGTH 28.13” 28.13” 28.13” 37.15” RUNNING TOOL - ROTR 41132027500 41132028100 41132034300 41132036800 PULLING TOOL - ROTGR 40051327500 40051327500 40051331202 40051336804 EQUALIZING PRONGS FISHING NECK SIZE 1.375” 1.375” 1.750” 2.313” RUNNING/PULLING TOOL 4014012000 4014012000 4014012500 4014013000 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102133000 4102133000 4102133430 4102133680 NIPPLE SEAL BORE SIZE 3.813” 4.125” 4.313” 4.562” ASSEMBLY NUMBER 2111131338130 2111131341230 2111131343130 2111131345630 ENGINEERING DATA MAXIMUM OD (NO-GO) 3.808” 4.120” 4.308” 4.557” OVER ALL LENGTH 37.38" 38.1" 38.61" 38.6” RUNNING TOOL - ROTR 41132038100 41132041200 41132043100 41132045600 PULLING TOOL - ROTGR 40051336804 40051336804 40051336804 40051345600 EQUALIZING PRONGS FISHING NECK SIZE 2.313” 2.313” 3.125” 3.125” RUNNING/PULLING TOOL 4014013000 4014013000 4014014000 4014014000 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102133810 4102134120 4102134310 4102134560 * Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision) RELATED TOOLS The Plug requires TWO runs to be set. Before Equalizing Prong is run in place, it is recommended to run a CHECK SET TOOL (ACCESSORY) . Plug Chokes are available in a variety of Materials, suitable for down-hole conditions. Norm Alloy is suitable for H 2 S Service (NACE MR-01-2 75, Latest Revision)

GOS Single Conductor Cable Head Assembly Tool String GOS Single Conductor Cable Head Assembly GOS Single Conductor Cable Head Assembly Rebco GOS Single Conductor Cable head Assembly provides mechanical and Electrical Connections from the wireline cable to the tool string. The Assembly has a Spring-Loaded Contact Plug. Product Code: 100 Read More DOWNLOAD DATASHEET REQUEST A QUOTE GOS Single Conductor Cable Head Assembly GOS Single Conductor Cable Head Assembly Click here TOOL APPLICATION Applications Connecting single-conductor electric wireline to downhole electronic instrumentation BHP and temperature gauge deployments requiring a live electrical connection Any downhole tool requiring power or signal transmission from the surface Key Benefits Spring-loaded contact design maintains electrical continuity during dynamic downhole conditions Provides both mechanical strength and electrical connectivity in a single component Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOMINAL SIZE ASSEMBLY NO. FISH NECK OD MAX OD BOX THD CONNECTION FOR CABLE SIZE LENGTH 1 7/16” 100052014144009 1.00” 1.44” 1 3/16” – 12 Pin 1/8” 13.76” 100052014144004 3/16” 100052014144005 7/32” 100052014144006 1/4” 100052014144007 5/16” 100052014144012 7/16” 1 11/16” 100052014169009 1.375” 1.687” 1 3/16” – 12 Pin 1/8” 13.76” 100052014169004 3/16” 100052014169005 7/32” 100052014169006 1/4” 100052014169007 5/16” 100052014169012 7/16” RELATED TOOLS Alloy Material is used to manufacture Rebco ROPE SOCKETS. Materials suitable for specific well conditions are available. Must be ordered by Wire Size in use. Sizes not listed are also available, please enquire.

ROTE & ROTK (Bottom No-Go) Lock Mandrel Sub-Assembly Lock Mandrels ROTE & ROTK (Bottom No-Go) Lock Mandrel Sub-Assembly ROTE & ROTK (Bottom No-Go) Lock Mandrel Sub-Assembly Rebco ROTE & ROTK are Bottom No-Go, Lock Mandrel Sub-Assembly to be set into BR Landing nipple . ROTK Lock is basically a Type ROTE Lock Sub-Assembly less the Packing Unit and Packing Mandrel. Product Code: 10 Read More DOWNLOAD DATASHEET REQUEST A QUOTE ROTE & ROTK (Bottom No-Go) Lock Mandrel Sub-Assembly ROTE & ROTK (Bottom No-Go) Lock Mandrel Sub-Assembly Click here TOOL APPLICATION Applications Locking wireline retrievable downhole equipment in BR Landing Nipples in 3 1/2" and 4 1/2" nominal tubing, where a Bottom No-Go reference is required High-volume completions requiring large internal bore flow areas in the larger bore size range Applications needing a full tubing pack-off using the ROTE with its integrated Packing Unit Applications requiring only positional locking without a pack-off, using the ROTK Key Benefits Bottom No-Go orientation in the larger bore range complements the Top No-Go ROTF and ROTM series, providing the correct lock type for each nipple profile in the completion string. Internal Fishing Neck design maximizes the bore flow area through the lock for high-volume production. Shares running tools, pulling tools, and prongs with the ROTF and ROTM family, maintaining a consistent and streamlined tool inventory for large-bore completions. Available in a variety of materials, including Norm Alloy certified for H2S service. Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA RELATED TOOLS Type ROTF , ROTM , ROTE , and ROTK Lock Mandrel Sub-Assemblies are devices used to position and secure Wireline retrievable downhole equipment into pre-set Tubing Nipples with appropriate profiles. The Locks provide a large flow areas through internal Fishing Neck. The Latch with Collet type locking fingers prevent upward movement, while No-Go shoulders prevent downward movement. Rebco ROTE and ROTK Lock Mandrel Sub-Assemblies are available in variety of Materials for down-hole conditions.

AO Tubing End Locator Assembly Service Tools AO Tubing End Locator Assembly AO Tubing End Locator Assembly Rebco AO Tubing End Locator is used to locate the lower end of the tubing so that its depth may be measured accurately. The tool features a slotted body housing a spring-loaded finger, which is held in place by a shear pin. As the tool exits the lower end of the tubing, the finger extends to a perpendicular position, indicating the tubing has ended. The finger will not re-enter the tubing until the shear pin is released, ensuring a clear and reliable depth reference. Product Code: 163 Read More DOWNLOAD DATASHEET REQUEST A QUOTE AO Tubing End Locator Assembly AO Tubing End Locator Assembly Click here TOOL APPLICATION Applications Establishing a positive depth reference at the lower end of the tubing string before wireline operations Correlating tool depth against tubing tally records to confirm accurate depth measurement Simultaneous debris sampling from below the tubing shoe in a single run Post-recompletion depth verification after tubing has been pulled and re-run. Key Benefits Provides a positive, physical depth tag at the tubing shoe, the most reliable depth correlation method available on wireline Simultaneous debris sampling eliminates the need for a separate bailer run for initial wellbore assessment. Spring-loaded trigger deploys automatically on exiting the tubing, no surface activation required. Shear pin selection allows the tool to be configured for different tubing sizes. Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOMINAL SIZE 1/2” 3/4” 7/8” 1” ASSEMBLY NUMBER 16300204 16300208 16300201 16300202 ENGINEERING DATA: MAXIMUM OD .50” .75” .88” 1.00” PIN THREAD CONNECTION 3/8" - 16 1/2" - 13 5/8" - 11 5/8" - 11 FISHING NECK OD None .687” .75” .75” BOTTOM THREAD CONNECTION None None None None EXTENDED DIAMETER with FINGER .95” 1.50” 1.94” 2.02” LENGTH 8.0” 8.50” 8.50” 8.50” MATERIAL Alloy Alloy Alloy Alloy NOMINAL SIZE 2” - 2 1/2” 3” - 3 1/2” 4 1/2” 5 1/2” - 7” ASSEMBLY NUMBER 16300203 163002011 163002012 163002013 ENGINEERING DATA: MAXIMUM OD 1.70” 2.00” 3.00” 3.46” PIN THREAD CONNECTION 15/16" - 10 15/16" - 10 1 1/16" - 10 1 1/16" - 10 FISHING NECK OD 1.375” 1.375” 1.750” 2.313” BOTTOM THREAD CONNECTION 1.375” 1.375” 1 1/16’ - 10 1 1/16’ - 10 EXTENDED DIAMETER with FINGER 3.05” 4.07” 4.59” 5.06” LENGTH 11.5” 11” 11” 11” MATERIAL Alloy Alloy Alloy Alloy RELATED TOOLS Product Code: 163 NOTE: Sampler Tube with Ball or Flapper bottom available - Specify OD and Length when ordering.

DO Running Tool Assembly Running Tools DO Running Tool Assembly DO Running Tool Assembly Rebco DO Running Tool is designed to run and set Type ROTD Collar Lock Mandrel. Product Code: 41 Read More DOWNLOAD DATASHEET REQUEST A QUOTE DO Running Tool Assembly DO Running Tool Assembly Click here TOOL APPLICATION Applications Setting DO Collar Lock mandrels into tubing collar recesses as stops for instruments and other downhole devices Key Benefits Straightforward collar-recess engagement mechanism for reliable setting of DO Collar Locks Three nominal sizes cover the most common production tubing size ranges. Alloy construction with standard pin thread and fishing neck Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOMINAL SIZE 2” 2 1/2” 3” ASSEMBLY NUMBER 4103202000 4103202500 4103203000 ENGINEERING DATA: MAXIMUM OD 1.34” 1.75” 2.25” PIN THREAD CONNECTION 15/16” - 10 15/16” - 10 1 1/16” - 10 FISHING NECK OD 1.375” 1.750” 1.750” WILL ENGAGE RUNNING NECK ID .906” 1.344” 1.688” LENGTH 13.44” 13.56” 16.93” MATERIAL Alloy Alloy Alloy RELATED TOOLS

Our team, with over 125 years of combined experience, brings a wealth of knowledge, ideas and enthusiasm to our operations. Your Quotation Request Quotation No.: QuotationRFQ10043 List of requested items: Your Information: Modified PORN & POXN Test Tool Plug Assembly Remove 25de2ec2-8247-4e82-8137-e51f64683489 Size / Customization / Special Instructions 1 1 ... 1 ... 1 Delete All Items First Name Last Name Company name Job Title Phone number Email Company Address Line 1 Address Line 2 City Province Country Postal Code An error occurred. Try again later Your content has been submitted SEND REQUEST

Glossary AO Rope Sockets AO Rope Sockets The Rebco AO Rope Socket is a disc-spring style socket that provides a secure, reliable connection between the wireline and the tool string. The slickline passes through the body, spring, and support, then wraps around a grooved disc to form a mechanical knot termination. This design creates a deliberate weak point at the top of the socket, ensuring that if the wire is subjected to excessive load, the break occurs at the socket. This leaves a clean, standardized fishing neck oriented upward for straightforward recovery with a pulling tool. Rebco AO Rope Socket is available in standard threaded connections from ⅜" to 2½" OD, with alloy steel construction and options for specialized materials. Back to the Tool page PDF download AO Rope Sockets AO Rope Sockets Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary ROTN (Non-Selective) Test Tool Assembly ROTN (Non-Selective) Test Tool Assembly The Rebco ROTN Non-Selective Test Tool is a single-trip, seat-and-seal pressure barrier that lands on the bottom No-Go shoulder of any compatible bottom No-Go Landing Nipple to hold applied pressure from above, allowing the tubing string above the tool to be pressure tested from surface, leak-located, or used to set a hydraulic-set packer. Like the ROTFB-2 and ROTRB-2 , the ROTN is not locked in the nipple profile; it rests and seals on the nipple's No-Go shoulder under its own weight and the applied test pressure, and incorporates a built-in equalizing feature to equalize pressure before retrieval. The ROTN 's "non-selective" designation means it cannot land on a specific nipple among several of the same size in a tubing string; it will seat in the first compatible bottom No-Go nipple it encounters while being run in. For this reason, the ROTN is most effective when there is a single target nipple or when the bottommost nipple in the string is the intended test point. The ROTN is a versatile tool compatible with a variety of Landing Nipple types that share a bottom No-Go design and compatible packing bore, making it a flexible choice when only a single test depth is required, and selective positioning is not needed. Available in nominal sizes 2" through 5½", covering seal bore sizes from 1.781" to 4.562", the broadest size range of any test tool in Section VIII. Run and retrieve using the SB Pulling Tool or JDC Pulling Tool, selected by nominal size. All assemblies are manufactured from NACE MR-01-75 compliant normal alloy. How to Order: Product Code 14. Specify nominal size, seal bore size, and material. Confirm that the bottom No-Go nipple type is present in the completion and that the packing bore is compatible with the ROTN . Non-standard sizes and materials available on request. Back to the Tool page PDF download ROTN (Non-Selective) Test Tool Assembly ROTN (Non-Selective) Test Tool Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary ROTZ-1 & ROTZ-2 Lock Mandrel Sub-Assembly ROTZ-1 & ROTZ-2 Lock Mandrel Sub-Assembly The Rebco ROTZ-1 and ROTZ-2 are Bottom No-Go, Non-Flowing Lock Mandrel Sub-Assemblies that cover nominal tubing sizes from 1.660" to 4.50". The assembly's upward-facing Dogs resist upward movement, while the No-Go function is provided by the shoulder machined into the attached accessory rather than by the lock body itself. As a result, the ROTZ can only be used with a Bottom No-Go type nipple, where the accessory's No-Go shoulder seats against the nipple's lower profile to prevent the lock from travelling further downward. The ROTZ-2 is used across most of the size range, with the ROTZ-1 appearing at the 1.660" and 4.50" nominal sizes. This bottom-referenced positioning design suits applications where the depth-control anchor point is below the lock, rather than above, as in the Top No-Go ROTW configuration. All ROTZ sub-assemblies are available in a variety of materials suitable for downhole conditions, and the required running and Pulling Tools with Probes are specified in the engineering data for each size and accessory type. How to Order: Product Code 10. Specify nominal tubing size, seal bore size, lock type ( ROTZ-1 or ROTZ-2 , as appropriate), material, service conditions, and the accessory type to support correct selection of running and pulling tools. Note that the ROTZ is compatible with Bottom No-Go type nipples only. Back to the Tool page PDF download ROTZ-1 & ROTZ-2 Lock Mandrel Sub-Assembly ROTZ-1 & ROTZ-2 Lock Mandrel Sub-Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.