Pulling Tools were designed primarily to retrieve subsurface locking devices and other downhole Wireline Service Equipment from the tubing bore. | Wireline , Slickline , and downhole Tools PULLING TOOLS DOWNLOAD PDF Pulling Tools

Glossary ROTRZG-2 Plug Choke with Removable Mandrel (BOTTOM No-Go) ROTRZG-2 Plug Choke with Removable Mandrel (BOTTOM No-Go) The Rebco ROTRZG Plug Choke with Removable Mandrel is a positive blank-off device designed to seal off pressure from both above and below, and is the Bottom No-Go counterpart to the ROTFWG in the removable mandrel plug family. It is designed to be set in BR Landing Nipples, where the No-Go shoulder is located at the lower end of the nipple profile, providing a bottom-referenced depth stop rather than the top-referenced stop of the ROTFWG . The plug requires two runs to be set, and uses a different Lock type from the standard ROTFWG , which must be accounted for when ordering. It covers nominal sizes from 2" through 3-1/2". Construction is Alloy throughout, and the same ROTC-1 (with Locator Ring), ROTBG , SB , JDC , ROTRB , and JUC running and pulling tool system applies. A Redress Kit with V-Packing (6 pieces) is available for all sizes, and pulling tool bore-pass restrictions apply and must be reviewed before planning retrieval operations. How to Order: Product Code 21 or 22. Specify nominal size, seal bore size, Running Tool type, Pulling Tool type, Pulling Probe, material, and service conditions. Note that the lock type differs from the ROTFWG and must be specified. Review pulling tool bore-pass restrictions. Refer to Pages XVI-33 through XVI-37. Back to the Tool page PDF download ROTRZG-2 Plug Choke with Removable Mandrel (BOTTOM No-Go) ROTRZG-2 Plug Choke with Removable Mandrel (BOTTOM No-Go) Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary AO Shock Absorber Assembly AO Shock Absorber Assembly The Rebco Shock Absorber is an in-string accessory placed between the instrument assembly and the wireline tool string to absorb and dampen the mechanical shock loads transmitted to the instrument during jarring operations, particularly the upward jar strokes used to retrieve stuck Collar Stops, Slip Stops, or other downhole assemblies with the instrument in the string. Even when the BW Bomb Well is in use, extreme jar loads can exceed the spring suspension's capacity and transmit damaging impacts to the recording instrument. The Shock Absorber provides an additional, higher-capacity buffer at the tool string level to protect against these loads. How to Order: Product Code 115. Contact Rebco for assembly numbers, sizes, and specification data. Back to the Tool page PDF download AO Shock Absorber Assembly AO Shock Absorber Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary FO Collar Stop Tool Assembly FO Collar Stop Tool Assembly Rebco Collar Stops are wireline-set mechanical stops designed to seat and lock in a tubing collar recess, providing a positive, depth-referenced landing point in the wellbore. Once set at the collar, the stop serves as a physical platform for positioning, setting, or activating downhole tools. Collar stops are primarily used to provide a controlled, known depth reference for operations that require a tool to be held stationary at a precise elevation, such as when setting a wireline-conveyed plug, packer, or valve at a location relative to a known collar. The stop is set by jarring down to lock the collet fingers into the collar groove, and retrieved by jarring upward to disengage. Available with threaded connections and in multiple OD ranges to suit all standard tubing sizes. Back to the Tool page PDF download FO Collar Stop Tool Assembly FO Collar Stop Tool Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary ROTC-1 Running Tool Assembly ROTC-1 Running Tool Assembly The Rebco ROTC-1 Running Tool is a compact, thread-engagement running tool designed to transport and land flow control devices that feature an external fishing neck protruding above the body of the sub-surface tool and accessible from above. The ROTC-1 threads directly onto this external fishing neck, gripping the device securely during the trip downhole and releasing it cleanly once the device is properly seated and locked within the nipple profile. A key operational feature of the ROTC-1 is the choice between running it with a Thread Protector or a Locating Ring, selected based on the specific application. The Thread Protector shields the internal box thread during deployment in dirty or debris laden environments, while the Locating Ring is used when the tool must positively locate a specific nipple profile before landing. This flexibility makes the ROTC-1 one of the most widely used running tools in the Rebco lineup, compatible with a broad range of sub-surface accessories across a wide range of nominal completion sizes. Available in nominal sizes from 1.660" through 4½", covering accessory sizes from 1.18" to 3.81". Alloy construction throughout, with fishing necks from 0.875" to 3.125" OD. How to Order: Available in assembly numbers from 41021201660 to 41021204500. Locating Rings are ordered separately and sized to the specific accessory OD. Specify nominal size and accessory OD when ordering. Back to the Tool page PDF download ROTC-1 Running Tool Assembly ROTC-1 Running Tool Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary ROTP Running Tool Assembly ROTP Running Tool Assembly The Rebco ROTP Running Tool is purpose-built for sub-surface devices equipped with removable prong assemblies, a design configuration in which a separate prong fishing neck component projects upward from the device's main body and extends beyond the primary fishing neck of the running tool. The ROTP features a deeper internal recess than standard running tools, specifically to house this protruding prong, ensuring it is fully captured and protected during the trip downhole rather than being exposed and at risk of damage from tubing restrictions or debris. The deeper bore of the ROTP also ensures that the prong assembly does not interfere with the engagement between the running tool and the sub-surface device's main fishing neck, allowing the two to connect and release cleanly. Like the ROTJ , the running neck ID is determined by the specific sub-surface tool being installed, and operators should specify the fishing neck size or tool type if the standard configuration is not suitable. The ROTP can also be ordered with a Prong Box Thread if required for certain prong assembly configurations. Available in nominal sizes 1 5/16" through 3", with maximum ODs from 1.31" to 2.50" and alloy construction throughout. How to Order: Specify nominal size and running neck ID required based on the sub-surface tool being installed. If the standard ROTP is not suitable, specify the fishing neck size or tool type. Assembly numbers range from 41113 (1 5/16") to 41116 (3"). Prong Box Thread option available, specify when ordering. Back to the Tool page PDF download ROTP Running Tool Assembly ROTP Running Tool Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary ROTRZG-1 Plug Choke with Removable Mandrel (BOTTOM No-Go) ROTRZG-1 Plug Choke with Removable Mandrel (BOTTOM No-Go) The Rebco ROTRZG Plug Choke with Removable Mandrel is a positive blank-off device designed to seal off pressure from both above and below, and is the Bottom No-Go counterpart to the ROTFWG in the removable mandrel plug family. It is designed to be set in BR Landing Nipples, where the No-Go shoulder is located at the lower end of the nipple profile, providing a bottom-referenced depth stop rather than the top-referenced stop of the ROTFWG . The plug requires two runs to be set, and uses a different Lock type from the standard ROTFWG , which must be accounted for when ordering. It covers nominal sizes from 2" through 3-1/2". Construction is Alloy throughout, and the same ROTC-1 (with Locator Ring), ROTBG , SB , JDC , ROTRB , and JUC running and pulling tool system applies. A Redress Kit with V-Packing (6 pieces) is available for all sizes, and pulling tool bore-pass restrictions apply and must be reviewed before planning retrieval operations. How to Order: Product Code 21 or 22. Specify nominal size, seal bore size, Running Tool type, Pulling Tool type, Pulling Probe, material, and service conditions. Note that the lock type differs from the ROTFWG and must be specified. Review pulling tool bore-pass restrictions. Refer to Pages XVI-33 through XVI-37. Back to the Tool page PDF download ROTRZG-1 Plug Choke with Removable Mandrel (BOTTOM No-Go) ROTRZG-1 Plug Choke with Removable Mandrel (BOTTOM No-Go) Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary AO & AD Knuckle Joint Assembly AO & AD Knuckle Joint Assembly AO Knuckle Joint (Threaded) The Rebco AO Knuckle Joint is a ball-and-socket articulating connector that provides up to 15° of angular flexibility within the wireline tool string. It is typically placed immediately above the working tool (running tool, pulling tool, or service tool) to allow that tool to align freely with the tubing bore rather than being held rigid by the tool string above. This angular compliance is particularly important in deviated or corkscrew tubing conditions, where a rigid tool string will bind against the tubing wall, preventing tools from reaching their target, reducing jarring effectiveness, or making it impossible to latch or unlatch downhole controls. When a significant deviation is present, additional knuckle joints can be placed between the stem and jars, and at every connection in the string as required. It is important to avoid placing excessive knuckle joints in the string; too many knuckle joints can redirect downward jarring force sideways into the tubing wall rather than downhole, reducing jar-down effectiveness. Every knuckle joint should have a fishing neck on the lower body to assist recovery in the event the ball-and socket connection separates downhole. Available in standard threaded connections from ⅜"–2½" OD, with optional double fishing neck. Critical: A knuckle joint is not a substitute for a swivel joint. A swivel provides rotational freedom under load with only 1°–5° of lateral movement. A knuckle joint provides 15° of angular movement but cannot rotate under load. If a knuckle joint is used where a swivel is needed and the wire parts, the rope socket fishing neck can fall over against the tubing wall at an angle, making recovery with a pulling tool extremely difficult or impossible. AD Knuckle Joint (RQLD) The Rebco AD Knuckle Joint is the RQLD double-shoulder quick-lock version of the Rebco AO , combining the same 15° ball and-socket angular flexibility with Rebco 's heavy-duty Quick Lock System connection. Available in RQLD connections, 1½"–2½" OD. Back to the Tool page PDF download AO & AD Knuckle Joint Assembly AO & AD Knuckle Joint Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary BA & BS Belly Spring Centralizer Assembly BA & BS Belly Spring Centralizer Assembly The Rebco Belly Spring Centralizers are a specialized centralizer variant using a bow-spring design optimized for applications where a lighter, more compliant centralizing force is preferred, such as surveys where excessive centralizer contact force could increase drag and interfere with accurate depth measurement, or where the tubing ID is smooth and consistent enough that a lighter spring contact is sufficient to maintain centralization. Types BA and BS offer two bow-spring geometries for different tubing sizes and compliance levels. How to Order: Product Code 116. Specify Type BA or BS and nominal size when ordering. Back to the Tool page PDF download BA & BS Belly Spring Centralizer Assembly BA & BS Belly Spring Centralizer Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

RQHS Hook Type Quick Lock System 'BHP' Instrument Hangers RQHS Hook Type Quick Lock System RQHS Hook Type Quick Lock System Rebco RQHS Hook Type Quick Lock System was primarily designed to be a convenience Tool. Using these Tools eliminates the conventional makeup of the Tool String. The Hook(s) feature can be considerable time savers when several wells in the field are to be surveyed. Product Code: 114 Read More DOWNLOAD DATASHEET REQUEST A QUOTE RQHS Hook Type Quick Lock System RQHS Hook Type Quick Lock System Click here TOOL APPLICATION Applications Multi-well BHP survey programs where rapid instrument make-up and break-out between wells saves significant rig-up time Any application where the wireline tool string is frequently assembled and disassembled with the same recording instrument Key Benefits Eliminates threaded connection make-up and break-out, dramatically reducing rig-up time in multi-well survey programs. Available in three materials (Stainless, Alloy, Inconel®) to match well with the environmental and pull load requirements Type A and Type B configurations accommodate both pin and box instrument connections. Any combination of connection types available, including 15/16"–10 to Amerada ¾"–16 adapters Stem available in ¾" to 1¼" nominal sizes with RQHS connections in various lengths Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA PART NUMBER MAX OD PIN CONNECTION FISHING NECK LENGTH MATERIAL Type ‘A’ – 15/16” – 10 PIN to ‘RQHS’ and 3/4” – 16 PIN to ‘RQHS’ 114002 1.25” 15/16” – 10 1.187” 5.00” Stainless 114005 Alloy 1140020 Inconel® 114003 1.25” 3/4” – 16 (Amerada) 1.187” 5.00” Stainless 114004 Alloy 1140021 Inconel® Type ‘B’ – 15/16” – 10 BOX to ‘RQHS’ and 3/4” – 16 BOX to ‘RQHS’ 114001 1.25” 15/16” – 10 None 4.00” Stainless 114009 Alloy 1140022 Inconel® 114006 1.25” 3/4” – 16 (Amerada) None 4.00” Stainless 114007 Alloy 1140023 Inconel® Type ‘A’ & ‘B’ – 15/16” – 10 to ‘RQHS’ and 3/4” – 16 to ‘RQHS’ ASS’Y NUMBER MAX OD PIN to BOX CONNECTION FISHING NECK LENGTH MATERIAL 11406201215 1.25” 15/16” – 10 1.187” 5.00” Stainless 11406201210 Alloy 11406201218 Inconel® 11406201225 1.25” 3/4” – 16 (Amerada) 1.187” 5.00” Stainless 11406201220 Alloy 11406201228 Inconel® RELATED TOOLS A - 15/16" - 10 PIN to RQHS and 3/4" - 16 PIN to RQHS B - 15/16" - 10 BOX to RQHS and 3/4" - 16 BOX to RQHS A & B - 15/16"- 10 to RQHS and 3/4" - 16 to RQHS Note: Any combination is available, also, 3/4" to 1 1/4" Nominal Size Stem can be ordered with RQHS Connection in various lengths. CAUTION: Recommended MAXIMUM PULL to be less than shown; before the Hook stretches to failure. Jarring should be avoided.

AD Rope Sockets Tool String AD Rope Sockets AD Rope Sockets Rebco AD Rope Sockets are recommended to be used with .066" to .125" diameter Single Strand Wire. AD Rope Sockets are made up of AO Rope Socket Assembly a nd RQLD Bottom Sub-Assembly. Product Code: 100 Read More DOWNLOAD DATASHEET REQUEST A QUOTE AD Rope Sockets AD Rope Sockets Click here TOOL APPLICATION Applications Suitable for any application that requires the AO rope socket, especially where faster tool string makeup and breakdown are priorities. Ideal for high-frequency, multi-run operations where minimizing rig-up time helps reduce overall job costs. Designed for heavy jarring operations that require a connection proven to withstand high cyclic impact loads. Key Benefits The RQLD Quick Lock connection enables tool-free, rapid makeup and breakdown on location. Double-shoulder design prevents accidental partial engagement. Self-washing locking mechanism performs reliably in sandy or debris-laden environments. Maintains full strength under high cyclic jarring loads. Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOMINAL SIZE 1 1/2” 1 3/4” 1 7/8” 2” 2 1/8” 2 1/2” ASSEMBLY NUMBER 10000031500 10000031750 10000031870 10000032000 10000032120 10000032500 ENGINEERING DATA: FISHING NECK OD 1.375” 1.750” 1.750” 1.750” 1.750” 2.313” BOX CONNECTION 'RQLD' 'RQLD' 'RQLD' 'RQLD' 'RQLD' 'RQLD' MAXIMUM OD 1.38” 1.75” 1.88” 2.00” 2.12” 2.50” LENGTH 12.16” 12.16” 12.16” 12.16” 12.16” 12.16” MATERIAL Alloy Alloy Alloy Alloy Alloy Alloy RELATED TOOLS

RQ Pulling Tool (Shear Up) Assembly Pulling Tools RQ Pulling Tool (Shear Up) Assembly RQ Pulling Tool (Shear Up) Assembly Rebco RQ Pulling Tool is a Special Tool design to fish tools with Rebco Type RQLD Fishing Necks. Product Code: 40 Read More DOWNLOAD DATASHEET REQUEST A QUOTE RQ Pulling Tool (Shear Up) Assembly RQ Pulling Tool (Shear Up) Assembly Click here TOOL APPLICATION Applications Retrieving sub-surface devices with RQ-profile external fishing necks Applications where standard R-Series or S-Series dogs will not engage the fishing neck Key Benefits Purpose-built dog geometry for RQ-profile fishing necks ensures positive latching where standard tools cannot engage. RQ (shear up) and SQ (shear down) variants cover both release direction preferences. Maintains operational consistency with the familiar R/S Series procedure Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA ASSEMBLY PART NUMBER NOM SIZE TO PULL FN SIZE ENGINEERING DATA ACCESSORY FISHING NECK PIN THREAD MAX OD LENGTH Pinning Tool Releasing Tool 4013122000 2” 1.375” 1.375” 15/16” - 10 1.77” 16.4” 16711004 167003 4013122500 2 1/2” 1.750” 1.750” 15/16” - 10 2.18” 16.36” 16711004 167006 4013123000 3” 2.313” 2.313” 1 1/16” - 10 2.74” 16.06” 16711005 167007 RELATED TOOLS