Glossary ROTRN Landing Nipple ROTRN Landing Nipple The Rebco ROTR and ROTRN Landing Nipples are complementary downhole profiles used to position, seal, and lock compatible wireline-deployed flow-control equipment in production tubing. The ROTR profile provides selective placement at multiple locations, while the ROTRN profile supplies a positive bottom no-go landing point for standalone installations or the deepest position in a multi-nipple completion. Together, the ROTR/ROTRN system supports applications such as gauge hangers, straddle systems, plugging operations, and other compatible subsurface flow-control devices. Back to the Tool page PDF download ROTRN Landing Nipple ROTRN Landing Nipple Click here RELATED TOOLS ROTR Landing Nipple VIEW ROTRN Lock Mandrel Assembly VIEW Valve ROTRRN Plug Choke Assembly VIEW Equalizing Prong ROTPRRN Plug Choke Assembly VIEW Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary DSD Double Shear Down Adapter Sub-Assembly DSD Double Shear Down Adapter Sub-Assembly The Rebco DSD Adapter is an accessory sub used to adapt certain pulling tools to engage sub-surface devices whose fishing neck geometry or bore size would otherwise require a different pulling tool series. The DSD is located between the pulling tool and the device's fishing neck, effectively extending the pulling tool's engagement capability to device configurations beyond its standard design range. Contact Rebco for specific compatible tool and device pairings. How to Order: Specify the pulling tool being used and the sub-surface device type/nominal size. Contact Rebco to confirm DSD Adapter compatibility and obtain assembly numbers. Back to the Tool page PDF download DSD Double Shear Down Adapter Sub-Assembly DSD Double Shear Down Adapter Sub-Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary OK-6 Kick-Over Tool Assembly OK-6 Kick-Over Tool Assembly The Rebco OK Series Kickover Tools are wireline service tools used with compatible running or pulling tools to install and retrieve 1-in. OD side-pocket subsurface-control devices in compatible side-pocket mandrels. During operation, the tool’s locating finger engages the mandrel’s orienting profile, while the kickover mechanism moves the attached service tool into alignment with the side-pocket bore for controlled device installation or retrieval. The OK Series includes models with different centralizer configurations, including spring-type and sleeve-type designs, to suit the applicable tubing and mandrel arrangement. Back to the Tool page PDF download OK-6 Kick-Over Tool Assembly OK-6 Kick-Over Tool Assembly Click here RELATED TOOLS AO & AD Knuckle Joint Assembly VIEW Running Tools for Gas Lift VIEW JDS Pulling Tool (Medium Reach) Assembly VIEW OK-5 Kick-Over Tool Assembly VIEW Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary EO Roller Stem (Weight Bar) EO Roller Stem (Weight Bar) The Rebco EO Roller Stem is a standard alloy steel stem fitted with rollers to reduce friction between the tool string and the tubing wall during wireline work in deviated or corkscrew wellbores. In deviated wells, conventional solid stems drag along the low side of the tubing under gravity, creating resistance that can prevent the tool string from reaching total depth, reduce jarring effectiveness, and accelerate wear on both the tubing and the stem body. The rollers, mounted on captive dowel pins, allow the stem to roll along the tubing wall rather than slide, significantly reducing drag forces. Roller diameters are sized to suit specific tubing IDs and must be specified at the time of order. Available in lengths of 2 ft, 3 ft, and 5 ft, with 2, 3, or 4 rollers per section, in standard threaded connections, 1¼"–2½" OD. On plastic-coated or chromium-finished tubing strings, nylon rollers can be specified to prevent abrasive damage that could initiate corrosion. Back to the Tool page PDF download EO Roller Stem (Weight Bar) EO Roller Stem (Weight Bar) Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary ROTJUS Pulling Tool (Medium Reach) Assembly ROTJUS Pulling Tool (Medium Reach) Assembly The Rebco JUS is the medium-reach version of the JUC , providing the same shear-up release mechanism for external fishing neck retrieval, with an additional core depth to engage fishing necks that sit lower in the device assembly than the JUC 's short reach core can reach. The JUS completes the JU family in the same way the JDS completes the JD family, offering operators a direct medium-reach step-up without changing pulling tool series or release direction. How to Order: Specify nominal size and JUS designation. Confirm medium reach is required before deployment. Contact Rebco for specific assembly numbers. Back to the Tool page PDF download ROTJUS Pulling Tool (Medium Reach) Assembly ROTJUS Pulling Tool (Medium Reach) Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary ROTW Tubing Slip Mandrel Sub-Assembly ROTW Tubing Slip Mandrel Sub-Assembly The Rebco ROTW Tubing Slip Mandrel Sub-Assembly is designed to be set directly in the tubing bore, without the need for Landing Nipples or tubing collars, covering nominal sizes of 1 3/4", 2", 2 1/2", 3 1/2", and 4". The slip mechanism grips the inner wall of the tubing, and the attached Element Sub-Assembly packs off the tubing ID to create a pressure seal. When fitted with compatible Equalizing Sub-Assemblies, the ROTW is designed to hold pressure from below only; it is not rated for bidirectional differential pressure holding. The ROTW Element Sub-Assembly is available separately as a Redress Kit (Product Code 91), allowing the sealing element to be replaced without removing the entire mandrel from service. Running is performed using the ROTW Running Tool, and pulling is done with the ROTRB Pulling Tool. The ROTW is constructed from Alloy material across all sizes. Nominal bore sizes from 1 3/4" to 4" are available in the standard catalogue, and the expanded and retracted slip ODs, element OD, minimum ID, and bottom thread connections are all specified in the engineering data for each size. How to Order: Product Code 10 for the ROTW Tubing Slip Mandrel Sub-Assembly; Product Code 91 for the ROTW Element Sub-Assembly (Redress Kit). Specify nominal tubing size (1 3/4", 2", 2 1/2", 3 1/2", or 4"), material, and the type of Equalizing Sub-Assembly required for the intended application. Back to the Tool page PDF download ROTW Tubing Slip Mandrel Sub-Assembly ROTW Tubing Slip Mandrel Sub-Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary GSL Pulling Tool Assembly GSL Pulling Tool Assembly The Rebco GSL is the long-reach version of the ROTGS , providing a deeper core travel distance to engage internal fishing necks located deeper within the sub-surface device bore than the standard ROTGS reach can reach. The GSL is operationally and mechanically identical to the ROTGS , shear-down release, core/prong engagement, internal fishing neck only, differing only in the length of the core assembly. The GSL is the correct tool when pre-job measurement or field confirmation indicates that the GS core does not travel far enough to engage the internal fishing neck latch recess. How to Order: Specify nominal size and ROTGSL designation. Confirm long reach is required by measuring the distance from the device entry to the internal fishing neck latch recess before deployment. Note: ‘ROT’ is abbreviated for Rebco Oil Tools . Back to the Tool page PDF download GSL Pulling Tool Assembly GSL Pulling Tool Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary ROTG & ROTN (Top No-Go) Lock Mandrel Sub-Assembly ROTG & ROTN (Top No-Go) Lock Mandrel Sub-Assembly The Rebco ROTG and ROTN are Top No-Go Lock Mandrel Sub-Assemblies designed to position and secure wireline retrievable downhole equipment in BF and BJ Landing Nipples, as well as the BL Sliding Sleeve. Both locks feature an External Fishing Neck and large flow areas through the bore, making them well-suited for high-volume production completions where maximizing the flow cross-section is important. Latch-type Collet locking fingers prevent upward movement, while the No-Go shoulders resist downward movement. The key distinction between the two is that the ROTG is essentially a ROTN sub-assembly without the Packing Unit and Packing Mandrel. The ROTN , with its Packing Unit, is used when completion requires a pack-off to isolate the tubing annulus above and below the nipple; the ROTG is used when no pack-off is needed, and only positional locking is required. Both are available in nominal sizes of 2 3/8" and 2 7/8", with seal bores ranging from 1.781" to 2.312". Material is Norm Alloy across all sizes. Running is performed with the ROTC-1 Running Tool with Shank BN-1, and pulling is performed with the ROTRB Pulling Tool with Probe BN-1. How to Order: Product Code 10. Specify lock type ( ROTG for no pack-off, ROTN for pack-off), nominal tubing size (2 3/8" or 2 7/8"), seal bore size, and material. Refer to Page XIV-18 for tool selection for running and pulling tools based on accessory type. Back to the Tool page PDF download ROTG & ROTN (Top No-Go) Lock Mandrel Sub-Assembly ROTG & ROTN (Top No-Go) Lock Mandrel Sub-Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

ALL PRODUCTS PREVIOUS NEXT All Wireline/Slickline Equipment and Tools

Page Not Found Check the URL, or go back to the homepage. Go to Homepage

Type 'ROTK' and 'ROTAK' Kick-Over Tool (KOT) Assembly Gas Lift - Kick Over Tools Type 'ROTK' and 'ROTAK' Kick-Over Tool (KOT) Assembly Type 'ROTK' and 'ROTAK' Kick-Over Tool (KOT) Assembly Rebco Type 'ROTK' KOT is used to install and retrieve 1” OD side pocket sub-surface control devices into Side Pocket Mandrels (SPM). Product Code: 195 Type 'ROTK' and 'ROTAK' Kick-Over Tool (KOT) Assembly Click here DOWNLOAD DATASHEET REQUEST A QUOTE