ROTRZB Instrument Hanger Assembly 'BHP' Instrument Hangers ROTRZB Instrument Hanger Assembly ROTRZB Instrument Hanger Assembly Rebco ROTRZB Instrument Hanger is used to land and lock geophysical instruments in BR Landing Nipples respectively, to allow recording of reservoir data. The Instrument Hanger Assembly consists of ROTZ-1/2 Lock Mandrel Sub-Assembly and a Hanger Sub; offered with Amerada (3/4" - 16) Box connection and/or Sucker Rod (15/16" - 10) Box connection. Product Code: 33 REQUEST A QUOTE DOWNLOAD DATASHEET ROTRZB Instrument Hanger Assembly ROTRZB Instrument Hanger Assembly Click here Applications Deploying pressure and temperature instruments into the BR Landing Nipples Completions containing both BF and BR nipple types, where matched hangers are needed for each profile Key Benefits ROTZ-1/2 Lock Mandrel Sub-Assembly provides secure, profile-specific locking within BR Landing Nipples Shares the same Hanger Sub design as the ROTFSB and ROTFWB, so the common lower assembly reduces parts inventory A Thread Protector on the ROTC-1 Running Tool is required, using the same procedure as the ROTFWB. Available in non-standard sizes and materials for special well conditions NOTE: Rebco ROTFSB , ROTFWB & ROTRZB Instrument Hangers are available in Sizes not shown and variety of Materials suitable for the Well Conditions. Rebco Type 'ROTTSB' Instrument Hanger Assembly is available in Sizes not shown and variety of Materials suitable for the Well Conditions. TECHNICAL DATA NOM SIZE SEAL BORE SIZE ASSEMBLY NUMBER LOCK MANDREL SUB-ASS’Y HANGER SUB BOX THREAD BOX THREAD w/3/4” - 16 w/15/16” - 10 3/4” - 16 15/16” - 10 2 3/8” 1.781” 33132201217800 33132201217801 10222202370 330117810 330117800 1.813” 33132201218100 33132201218101 330118110 330118100 1.875” 33132201218700 33132201218701 330118710 330118700 2 7/8” 2.250” 33132201222500 33132201222501 10222202870 330122510 330122500 2.313” 33132201223100 33132201223101 330123110 330123100 3 1/2” 2.562” 33132201225600 33132201225601 10222202560 330125610 330125600 2.750” 33132201227500 33132201227501 10222203500 330127510 330127500 2.813” 33132201228100 33132201228101 10222203500 330128110 330128100 4 1/2” 3.688” 33132201136800 33132201136801 10221204500 330136810 330136800 3.750” 33132201137500 33132201137501 330137510 330137500 3.813” 33132201138100 33132201138101 330138110 330138100 RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

Glossary JUC Pulling Tool (Short Reach) Assembly JUC Pulling Tool (Short Reach) Assembly The Rebco JUC is a shear-up, short-reach pulling tool for external fishing necks. Its operational sequence mirrors that of the JDC : dogs snap over the fishing neck as the tool is lowered, and upward tension retrieves the device, but the critical difference lies in the release direction: rather than jarring down to release, the JUC releases by jarring upward. This makes the JUC the correct choice for sub-surface devices installed in completions or positions where a downward jar could risk damaging equipment below, driving the device further into a restriction, or creating an unsafe condition. The shear-up release also provides a distinct operational advantage when retrieving devices in wells with heavy fluid columns or high upward wellbore pressure, conditions that would make a downward jar difficult to deliver with sufficient force. In these situations, the upward jar needed to release the JUC is assisted by the wellbore pressure, making the release more reliable. The short-reach core suits fishing necks located near the top of the sub-surface device assembly. Available in nominal sizes from 1¼" to 4", with alloy construction throughout. How to Order: Available in assembly numbers from the JUC series. Specify the nominal size and confirm that the short reach is appropriate for the target fishing neck depth. Contact Rebco for specific assembly numbers. Back to the Tool page PDF download JUC Pulling Tool (Short Reach) Assembly JUC Pulling Tool (Short Reach) Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

GRL Pulling Tool Assembly Pulling Tools GRL Pulling Tool Assembly GRL Pulling Tool Assembly Rebco GRL Pulling Tool is a combination tool made up of the GSL Pulling Tool and GU Shear-Up Adapter. Product Code: 40 REQUEST A QUOTE DOWNLOAD DATASHEET GRL Pulling Tool Assembly GRL Pulling Tool Assembly Click here Applications GR-profile internal fishing neck retrieval, where the standard GR reach is confirmed to be insufficient Instrument hanger configurations with the internal fishing neck positioned deeper than the GR can access Key Benefits Long-reach core extends full GR family compatibility to deeply recessed internal fishing necks. Identical operating procedure to the GR, no retraining required Available for the same instrument hanger families as the GR TECHNICAL DATA NOMINAL SIZE 2” 2 1/2” 3” 4” ASSEMBLY NUMBER 4005130818700 4005130821800 4005130827500 4005130836804 ENGINEERING DATA: MAXIMUM OD 1.81” 2.16” 2.72” 3.62” PIN THREAD CONNECTION 15/16” - 10 15/16” - 10 1 1/16” - 10 1 1/16” - 10 FISHING NECK OD 1.375” 1.750” 2.313” 2.313” WILL ENGAGE FISHING NECK ID 1.38” 1.81” 2.31” 3.12” LENGTH 20.4” 20.9” 21.4” 22.7” MATERIAL Alloy Alloy Alloy Alloy RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

Glossary HD Hold-Down (No-Blow) Tool Assembly HD Hold-Down (No-Blow) Tool Assembly The Rebco HD Hold-Down Tool, also known in the field as the No-Blow Tool, is an essential safety and operational accessory for BHP surveying in active or flowing wells. Its purpose is straightforward but critical: when a well is producing gas or fluid upward through the tubing during a survey, the upward flow creates a force that acts on the instrument assembly and tries to push it, and the entire wireline tool string back up the tubing. In severe cases, this upward force can blow the instruments and tool string back to the surface uncontrollably, creating a hazardous situation at the wellhead. The HD Hold-Down is placed in the tool string above the instrument assembly, and its spring-loaded dogs expand against the tubing wall to anchor the tool string downward against the upward flow force. A second benefit of the HD is that by anchoring the tool string in place, it reduces the total number of Stems required to keep the instruments at the survey depth, since the hold-down force from the dog grip supplements the weight of the stem, the operator can use less stem weight to achieve the same depth stability. The HD is available in nominal sizes 1½" through 5½", in both Amerada (¾"–16) and Sucker Rod (15/16"–10) pin-box thread connections, and is manufactured from Stainless Steel throughout for corrosion resistance in wellbore fluid environments. How to Order: Available in assembly numbers 11006032060 through 11006035500 (Amerada) and 11006032061 through 11006035501 (Sucker Rod). Specify nominal size and thread connection type (Amerada or Sucker Rod) when ordering. Back to the Tool page PDF download HD Hold-Down (No-Blow) Tool Assembly HD Hold-Down (No-Blow) Tool Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

ROTW-1 & ROTW-2 Lock Mandrel Sub-Assembly Lock Mandrels ROTW-1 & ROTW-2 Lock Mandrel Sub-Assembly ROTW-1 & ROTW-2 Lock Mandrel Sub-Assembly Rebco ROTW-1 & ROTW-2 is a Top No-Go, Non Flowing Lock. Lock Mandrel Sub-Assembly has Locks (Dogs) which prevent upward movement and a No-Go shoulder that seats in the upper part of a seating product to prevent downward movement. NOTE: Required Running and Pulling Tools with appropriate Probes are shown in ENGINEERING DATA for Type of Accessories attached to the Lock Mandrel Sub-Assembly. Product Code: 10 REQUEST A QUOTE DOWNLOAD DATASHEET ROTW-1 & ROTW-2 Lock Mandrel Sub-Assembly ROTW-1 & ROTW-2 Lock Mandrel Sub-Assembly Click here Applications Top No-Go, non-flowing lock applications in wells without dedicated machined Landing Nipples Any completion where a positive mechanical stop is required to prevent the lock from passing below the intended seating depth Nominal tubing sizes from 1.660" through 4.50", with seal bore coverage from 1.18" to 3.81" Key Benefits The No-Go shoulder provides a positive mechanical depth stop, eliminating the risk that the lock will inadvertently pass through to a lower position during run-in. The Top No-Go design is functionally compatible with a wide range of flow control accessories, plugs, and instrumentation hangers. Available in a range of materials suitable for downhole service conditions. Running and Pulling Tools with probes are specified per accessory type, allowing the ROTW to interface with various wireline tool strings. Rebco ROTW-1 & ROTW-2 Lock Mandrel Sub-Assemblies are available in variety of Materials, suitable for down-hole conditions. TECHNICAL DATA NOMINAL SIZE 1.660” 1.900” 2 1/16” SEAL BORE SIZE 1.18” 1.43” 1.50” 1.56” SUB ASSEMBLY TYPE of LOCK ‘ROTW-1’ ‘ROTW-2’ ‘ROTW-2’ SUB-ASS’Y NUMBER 10171201180 10172201430 10172201500 10172201560 ENGINEERING DATA MAXIMUM OD (No-Go) 1.240” 1.490” 1.552” 1.615” FISHING NECK SIZE .875” 1.187” 1.187” 1.187” MINIMUM ID .50” .75” .75” .75” LENGTH 6.12” 6.62” 6.44” 6.44” MATERIAL Alloy Alloy Alloy Alloy NOMINAL SIZE 2 3/8” 2 7/8” SEAL BORE SIZE 1.78” - 1.81” 1.87” 2.25” 2.31” SUB ASSEMBLY TYPE of LOCK ‘ROTW-2’ ‘ROTW-2’ SUB-ASS’Y NUMBER 10172202370 10172201870 10172202250 10172202310 ENGINEERING DATA MAXIMUM OD (No-Go) 1.865” 1.928” 2.303” 2.365” FISHING NECK SIZE 1.375” 1.375” 1.750” 1.750” MINIMUM ID .88” .88” 1.19” 1.19” LENGTH 7.53” 7.53” 7.69” 7.69” MATERIAL Alloy Alloy Alloy Alloy NOMINAL SIZE 3 1/2” SEAL BORE SIZE 2.56” 2.75” 2.81” 2.87” SUB ASSEMBLY TYPE of LOCK ‘ROTW-2’ SUB-ASS’Y NUMBER 10172202560 10172202750 10172202810 10172202870 ENGINEERING DATA MAXIMUM OD (No-Go) 2.625” 2.802” 2.865” 2.915” FISHING NECK SIZE 1.750” 2.313” 2.313” 2.313” MINIMUM ID 1.20” 1.44” 1.44” 1.44” LENGTH 8.25” 10.47” 10.47” 10.47” MATERIAL Alloy Alloy Alloy Alloy NOMINAL SIZE 4 1/2” SEAL BORE SIZE 3.68” 3.75” 3.81” SUB ASSEMBLY TYPE of LOCK ‘ROTW-1’ SUB-ASS’Y NUMBER 10171203680 10171203750 10171203810 ENGINEERING DATA MAXIMUM OD (No-Go) 3.740” 3.802” 3.864” FISHING NECK SIZE 3.125” 3.125” 3.125” MINIMUM ID 2.06” 2.06” 2.06” LENGTH 9.93” 9.93” 9.93” MATERIAL Alloy Alloy Alloy RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

Glossary Valve ROTRRN Plug Choke Assembly Valve ROTRRN Plug Choke Assembly The Rebco ROTRRN Plug Choke Assembly is the No-Go counterpart to the ROTRR , designed to land in a ROTRN Landing Nipple of the same size, plug off the nipple and tubing, and hold bidirectional pressure. The ROTRRN is made up of a ROTRN Lock Mandrel (Product Code 10, 17, or 18) combined with a ROTR Equalizing Valve Sub-Assembly with Cap (Product Code 20), and like the ROTRR , it requires only one run to be set. It covers the same nipple seal bore range of 1.710" through 4.813" as the ROTRR . The key operational distinction from the ROTRR is the No-Go bottom shoulder provided by the ROTRN Lock Mandrel, which provides the operator with a positive mechanical depth stop in addition to the standard plug-choke function. Equalizing Prong numbers, Running and Pulling Tool numbers, and Check Set Tool numbers are identical to the ROTRR series for each corresponding seal bore size, simplifying cross-family tool management. How to Order: Product Code 20. Specify nipple seal bore size, Lock Mandrel type (Product Code 10, 17, or 18 as applicable), material, and service conditions. Refer to Pages XVI-4 through XVI-6 for full engineering data and tool numbers. Back to the Tool page PDF download Valve ROTRRN Plug Choke Assembly Valve ROTRRN Plug Choke Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary Equalizing Prong ROTPXXN Plug Choke Assembly Equalizing Prong ROTPXXN Plug Choke Assembly The Rebco Equalizing Prong ROTPXXN Plug Choke Assembly is the No-Go counterpart to the ROTPXX , landing in a ROTXN Landing Nipple of the same size with bidirectional pressure holding using the same prong-and-valve sealing system. The ROTPXXN is made up of a ROTXN Lock Mandrel (Product Code 10, 17, or 18) and a ROTPX Equalizing Prong and Valve Sub-Assembly with Cap (Product Code 20). It requires two runs to be fully set and covers nipple seal bores from 1.500" through 4.562". The Check Set Tool from the ROTPXX series is referenced for use with the ROTPXXN , confirming cross-tool compatibility for the verification run. The ROTXN Lock Mandrel's No-Go shoulder adds the same positive mechanical depth stop to the ROTPXXN that the ROTPRRN provides in the ROTR nipple family, giving the operator certainty of nipple seating before the two-run setting sequence is committed. All Prong lengths, Fishing Neck sizes, and Running and Pulling Tool numbers mirror the ROTPXX series for each corresponding seal bore size. How to Order: Product Code 21. Specify nipple seal bore size, Lock Mandrel type (Product Code 10, 17, or 18), Prong Fishing Neck size, Prong Running and Pulling Tool number, Prong length, material, and service conditions. Refer to Pages XVI-21 and XVI-22 for full engineering data. Back to the Tool page PDF download Equalizing Prong ROTPXXN Plug Choke Assembly Equalizing Prong ROTPXXN Plug Choke Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary A Tubing Swage A Tubing Swage The Rebco A Tubing Swage is a hardened-steel tool engineered to reform and restore lightly collapsed, dented, or otherwise constricted sections of tubing, thereby allowing wireline tools, subsurface controls, and completion equipment to pass through freely. When a section of tubing is mechanically deformed, whether from wellhead loads, surface handling damage, parted tubulars, or partial collapse from external pressure, the resulting restriction can prevent tools from reaching their target depth or trap tools already downhole. The Swage restores that bore without requiring a workover rig or tubing pull. The OD of the tool is machined to the drift diameter of the tubing in which it is to be run, the same standard used to qualify tubing for downhole tools during manufacture. Both the upper and lower ends of the Swage are tapered to ease entry into the restriction and provide gradual reforming action as the tool is jarred through. A central bore with lateral porting allows wellbore fluid to bypass through the tool body as it transits the tight section, preventing hydraulic lock from stalling or trapping the tool at the restriction. Because the swage must be forced through the constriction using downward jarring, upward jarring capability must also be included in the tool string to recover the swage in the event it becomes lodged. Available in standard threaded and Type C box-bottom connections, ¾"–6⅝" OD. Custom sizes available on special order. Important: Always include upward jarring capability in the tool string when running a Tubing Swage. If the swage becomes lodged in the restriction, jar-up capability is the primary recovery method. Running without jar-up risks leaving the swage trapped in the tubing. How to Order: Part Number is 10700x.xxx (0 prefix for ODs less than 1.00"). All Tubing Swages are part-numbered by OD to 3 decimal places ±.002". Metric prefix: 10701. For Type C (box bottom): specify at the time of order. If the box connection differs from the standard pin, specify the required thread. Back to the Tool page PDF download A Tubing Swage A Tubing Swage Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

TUBING DRIFTS Service Tools TUBING DRIFTS TUBING DRIFTS Tubing drifts are tools used to verify the internal diameter (ID) of tubing or other cylindrical components installed during tubing completion. This is done by pulling a precisely machined drift - sometimes referred to as a "rabbit" - through the tubing to confirm unobstructed passage. Product Code: 163 REQUEST A QUOTE DOWNLOAD DATASHEET TUBING DRIFTS TUBING DRIFTS Click here Applications Confirming nipple bore clearance before running lock mandrels or plugs that must pass through restrictions above the target setting depth. Verifying subsurface safety valve bore dimensions before running flow controls that must transit the valve's bore Post-remediation confirmation that a tubing bore has been returned to minimum drift specification after swaging or cleaning operations Key Benefits Go/no-go drift confirmation is faster and simpler than a full gauge cutter run when the bore condition is already known. Manufactured to exact minimum drift dimensions — provides definitive pass/fail bore clearance confirmation Available in all standard nipple bore and completion tool dimensions Rebco offers a variety of drift tools to suit different applications. The examples below are representative but not exhaustive. If a specific type is required, please provide a full description for custom options. Drift Tool Types Rebco FD Drift is a 15" fluted bar stock drift with threaded Pin-to-Box connections and a fishing neck sized appropriately to the tool's nominal OD. Rebco FTD Drift is similar in design to the FD , this tool includes a 12" Teflon ® fluted sleeve to reduce the risk of scarring or damaging coated tubing IDs. It also features threaded Pin-to-Box connections and a proper fishing neck. Rebco TA Drift is a 12" tubular drift with threaded Pin-to-Box connections and a fishing neck engineered for standard tubing applications. When Ordering Specify: OD - Outside Diameter, OD Size determines the Connections Type - of Drift product required *Teflon ® is registered Trade Mark of DuPont Corp. TECHNICAL DATA RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

SS Tubing Slip Stop Assembly Service Tools SS Tubing Slip Stop Assembly SS Tubing Slip Stop Assembly Rebco SS Tubing Slip Stop is designed to be set in the API or Premium Tubing. The Slip Stop is lowered in the tubing to the desired depth; a rapid downward movement expands the Slips and sets the Stop. Downward jarring drives the serrated Slips against the tubing wall and releases the Running Tool. Product Code: 164 REQUEST A QUOTE DOWNLOAD DATASHEET SS Tubing Slip Stop Assembly SS Tubing Slip Stop Assembly Click here Applications Establishing a depth-controlled anchor point at any tubing depth, independent of collar locations Providing a reactive footing for wireline tools in completions without landing nipples at the required depth Setting tools in open-bore tubing intervals where collar-type stops cannot be used Multi-zone operations requiring landing points between collar positions Key Benefits Grips the smooth tubing bore anywhere in the string, not limited to collar locations Resists both upward and downward movement after engagement, provides reliable bi-directional anchoring Simple jar-up release, no special surface equipment or tools required Available in all standard tubing sizes and threaded connections TECHNICAL DATA NOMINAL SIZE 1 1/4” 1 1/2” 1 3/4” 2 3/8” ASSEMBLY NUMBER 16414141250 16414141500 16414141750 16414142000 ENGINEERING DATA: MAXIMUM OD RUNNING POSITION 1.23” 1.56” 1.69” 1.83” SET POSITION 1.47” 1.66” 1.79” 1.998” LENGTH RUNNING LENGTH 16.1” 16.1” 16.1” 16.94” SET LENGTH 13.6” 13.6” 13.6” 14.25” Reference: For Tubing ID 1.380” - 1.410” 1.610” - 1.650” 1.751” 1.867” - 1.995” FISHING NECK .875” 1.187” 1.187” 1.375” MIN ID .44” .62” .62” .70” MATERIAL Alloy Alloy Alloy Alloy RUNNING TOOL TYPE F 4125201 41251 41251 4125200 TYPE ROTSB 4014011250 4014011501 4014011501 4014012000 PULLING TOOL TYPE ROTJDC 400703021250 400703021500 400703021500 400703022000 NOMINAL SIZE 2 7/8” 3 1/2” 4 1/2” ASSEMBLY NUMBER 16414142500 16414143500 16414144500 ENGINEERING DATA: MAXIMUM OD RUNNING POSITION 2.25” 2.71” 3.62” SET POSITION 2.49” 3.06” 4.38” LENGTH RUNNING LENGTH 16.38” 17.98” 21.06” SET LENGTH 13.65” 15.23” 17.8” Reference: For Tubing ID 2.44” 2.750” - 2.992” 3.6” - 4.38” FISHING NECK 2.313” 2.313” 3.125” MIN ID 1.62” 1.62” 2.35” MATERIAL Alloy Alloy Alloy RUNNING TOOL TYPE F 4125250 4125350 4125450 TYPE ROTSB 4014013000 4014013000 4014014000 PULLING TOOL TYPE ROTJDC 400703023000 400703023000 400703024000 RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.