Tool String
A Wireline Tool String is made up of set Tools (Work String) to do specific Wireline operations down-hole. The Tools are attached to the Wire by means of a Rope Socket.
Below the Rope Socket a Swivel Joint is placed to avoid “torsion” or twisting of the Wire.
In order to overcome the friction of the Stuffing Box packing and well pressures, Stem is used as weight to lower the tool string down hole. The weight of the stem is also used to generate impact force when performing jarring action. The Jars enable the impact of the tool string in either direction, up or down, against any encountered obstruction down hole.
To intensify an impact force to the tool string, an Accelerator can be used. Finally, to obtain the flexibility to the tool string, a Knuckle Joint is placed above the selected tool to do a specific function as needed.
The following links list a selection of Tools which are used in a Typical Tool String; chosen by the Operator to suit the work to be performed.
Rebco can supply Tool Strings from 3/8” to 2 1/2” diameters, with Threaded Connections as well as QLS (Quick Lock System), Rebco Type ‘RQLS’ and/or Rebco Type ‘RQLD’ Connections.
AO Rope Sockets
Rebco AO Rope Sockets are recommended to be used with .066" to .105" diameter Single Strand Wire. The Wireline should be passed through the Body, Spring and Support, before being wrapped tightly around the groove of the Disc.
Product Code: 100
AD Rope Sockets
Rebco AD Rope Sockets are recommended to be used with .066" to .125" diameter Single Strand Wire. AD Rope Sockets are made up of AO Rope Socket Assembly and RQLD Bottom Sub-Assembly.
Product Code: 100
BO Rope Sockets
Rebco BO Rope Socket (Single Strand) is used to attach the wire to the tool string. The wire should be passed through the Body and the Sleeve, wrap the wire around the groove of the Cone; tighten the Set Screw. Draw on Wire to pull the Sleeve into the Body.
Product Code: 100
BD Rope Sockets
Rebco BD Rope Sockets are recommended to be used with up to.125" diameter Single Strand Wire. BD Rope Sockets are made up of BO Rope Socket Assembly and RQLD Bottom Sub-Assembly.
Product Code: 100
CO Rope Sockets
Rebco CO Rope Sockets are designed for use with small, stranded lines up to 5/16" diameter. CO Rope Sockets are made up of a: Body, Bottom Sub, Carriage, Slips and Set Screw. The Slips are designed to cause the line to break under severe loading at a specific percentage of the full line tensile strength.
Product Code: 100
CD Rope Sockets
Rebco CD Rope Sockets are designed for use with small, stranded lines up to 5/16" diameter. CD Rope Sockets is made up of CO Rope Socket Assembly and RQLD Bottom Sub-Assembly. The Slips are designed to cause the line to break under severe loading at a specific percentage of the full line tensile strength.
Product Code: 100
D Rope Sockets
Rebco D Dummy Rope Sockets are available with threaded or RQLS / RQLD Connections. The advantage of this tool is that it can be attached to other types of tools with Pin connection for a variety of Wireline applications.
Product Code: 100
GOS Single Conductor Cable Head Assembly
Rebco GOS Single Conductor Cable head Assembly provides mechanical and Electrical Connections from the wireline cable to the tool string. The Assembly has a Spring-Loaded Contact Plug.
Product Code: 100
RC Rope Socket Assembly
Rebco RC Rope Socket is designed to connect a Capsulated Line to the Tool String. The wear bushing and swivel design, prevent damage to the wire. The Capsulated Line is inserted through the wear bushing, and the Body. The clamp is tightened to the line and pulled into the Rope Socket. A connector sub is slipped over the bottom sub, a retainer is screwed and secured by a set screw. The bottom sub and the connector sub are made up to the Body.
Product Code: 100
CGO & Additional Types of Rope Sockets
Rebco CGO Rope Sockets are designed for use with small stranded lines, up to 1/4" diameter. Similar in design as Rebco CO Rope Sockets, the Tool has an additional swivel bottom.
Product Code: 100
HO Heavy Duty Rope Socket Assembly - Threaded Connection
Rebco HO Heavy Duty Rope Socket is designed for Heavy Duty Wireline Work. The wire should be passed through the body and the clamp Sub-Assembly. The unique design will trap the wire; held in place by socket screws.
Product Code: 100
HD Heavy Duty Rope Socket Assembly - 'QLS' Connection
Rebco HD Heavy Duty Rope Socket is designed for Heavy Duty Wireline Work. HD Rope Socket are made up of HO Rope Socket Assembly with an RQLD Bottom Sub-Assembly. The wire should be passed through the body and the clamp Sub-Assembly. The unique design will trap the wire; held in place by socket screws.
Product Code: 100
HO Swivel Joint Assembly
Rebco HO Swivel Joint was designed to minimize the twisting of the Wireline when running the Tools down hole. HO Swivel Joint's have a Threaded Connection.
Product Code: 104
HD Swivel Joint Assembly
Rebco HD Swivel Joint was designed to minimize the twisting of the Wireline when running the Tools down hole. HD Swivel Joint's have a 'QLS' - RQLD Connection.
Product Code: 104
A Stem (Weight Bar)
Rebco A Solid Bar Stems are with Threaded Connections - (1 1/4" - 2 1/2" Sucker Rod Type) 3/8" and 1/2" Diameter Stem is used for Velocity String Type completions.
Note: All Rebco Tools have machined Flats for safer use.
Product Code: 101
AD Stem (Weight Bar)
Rebco AD Stems are with integral QLS (Quick Lock System) Connections - Rebco Type RQLD
ACCESSORIES: Useful Tools to service integral 'QLS' Connections - Rebco Type RQLS and RQLD
Product Code: 101
BO Lead Filled Stem (Weight Bar)
Rebco BO Lead Filled Stems are with Threaded Connections - (Sucker Rod Type)
Product Code: 101
BD Lead Filled Stem (Weight Bar)
Rebco BD Lead Filled Stems are with integral QLS (Quick Lock System) - Rebco Type RQLD
Product Code: 101
EO Roller Stem (Weight Bar)
Rebco EO Roller Stems are with Threaded Connections - (Sucker Rod Type)
Product Code: 101
ED Roller Stem (Weight Bar)
Rebco ED Roller Stems are with integral QLS (Quick Lock System) - Rebco Type RQLD*
Product Code: 101
AO, AD & AS Link Jar Assembly
Link Jars consist of two interlocking steel links with a Fishing Neck and Pin-Box connection. The interlocking steel links can be extended or collapsed by manipulating the Wireline at the surface to produce upward or downward jarring. The intensity of jarring impact depends on the weight of the Wireline Stem (PRODUCT CODE 101) installed above the Jar, and the stroke of the Jar as well as the wellbore conditions.
Product Code: 102
BO & BD Hydraulic Jar Assembly
Rebco Hydraulic Jar is used to apply high impact force. The closed hydraulic system within the jar makes it possible for the jarring impact to be controlled. The intensity of the impact is proportionate to the full force on the Wireline and to the weight of Stem.
Product Code: 102
CO & CD Knuckle Jar Assembly
Rebco Knuckle Jar is similar in design to the Knuckle Joint (Product Code 103), the difference being is that the Knuckle Jar in addition to its flexibility is used as a Tubular Jar (Product Code 102). Typically, Knuckle Jar is used with BHP work and light duty Wireline applications.
Product Code: 102
DO & DD Tubular Jar Assembly
Rebco Tubular Jar consists of a perforated tube for fluid by-pass, and a mandrel connected to the fishing neck. A telescoping mandrel is extended or collapsed within the tube by manipulating the Wireline at the surface, thus jarring action is produced. As in AO Link Jars, the intensity of jarring impact depends on the weight of Stem and wellbore conditions.
Product Code: 102
SO & SD Spring Jar Assembly
Rebco Spring Jar is a telescoping up-stroke Jar installed below the Stem. The impact force can be predetermined at surface by the Operator with the Calibration Unit shown below. Rebco offers Spring Jars with Threaded or QLS Connections.
Product Code: 102
EO & ED Accelerator Assembly
Rebco Accelerator is designed to be used with various Jars. The Accelerator assists in maintaining a constant pull as the Jars open, and upon release, the impact is intensified.
Rebco offers Accelerator with Threaded and QLS Connections.
Product Code: 102
AO & AD Knuckle Joint Assembly
Rebco Knuckle Joint has a ball type swivel joint to provide flexibility in the Wireline Tool String. Normally, it is used on the end of the Wireline Tool String to allow for angular movement between the tool string and the Running or Pulling Tool.
Product Code: 103