Equalizing Prong ROTPRR Plug Choke Assembly
Rebco Equalizing Prong ROTPRR Plug Choke Assembly, when landed in ROTR Landing Nipple, of the same size, will plug off the nipple and tubing. The Plug Choke is capable of holding pressure differentials from above or below.
NOTE: Equalizing Prong ROTPRR Plug Choke Assembly is made up of ROTR Lock Mandrel (PRODUCT CODE 10, 17, and/or 18) and ROTPR Equalizing Prong and Sub-Assembly with a Cap (PRODUCT CODE 20).
Product Code: 21
Applications
Plugging and bidirectional pressure holding in ROTR Landing Nipples across seal bore sizes of 1.710" through 4.562", with larger sizes available on inquiry.
Completions requiring a more positive prong-seated pressure seal than the valve-type ROTRR provides
Applications where independent prong running allows the plug body to be confirmed set before the pressure-holding element is deployed, reducing the risk of a failed plug installation
Large-bore and Safety Valve nipple sizes (5.875" and 5.963") available on inquiry
H2S service environments requiring Norm Alloy construction
Key Benefits
The Equalizing Prong seated V-Packing provides a robust, mechanically positive pressure seal from both above and below, suited to demanding differential pressure applications.
Running the Check Set Tool before the Prong provides a two-stage confirmation that the plug body is correctly seated before the pressure element is committed, reducing the risk of failed installations in critical wells.
Equalizing Prong lengths can be custom-ordered to suit specific tool string requirements.
Covers sizes up to 5.963" on inquiry, encompassing the largest completion nipple profiles in the Rebco range.
Available in a variety of materials to suit downhole conditions.
The Plug requires TWO runs to be set. Before Equalizing Prong is run in place, it is recommended to run a CHECK SET TOOL (ACCESSORY).
Plug Chokes are available in a variety of Materials, suitable for down-hole conditions.
Norm Alloy is suitable for H2S Service (NACE MR-01-2 75, Latest Revision)
TECHNICAL DATA
NIPPLE SEAL BORE SIZE | 1.710” | 1.781” | 1.875” | 2.000” | |
ASSEMBLY NUMBER | 2111131317130 | 2111131317830 | 2111131318730 | 2111131320030 | |
ENGINEERING DATA | |||||
MAXIMUM OD (NO-GO) | 1.705” | 1.776” | 1.870” | 1.995” | |
OVER ALL LENGTH | 26.0” | 26.0” | 26.0” | 26.0” | |
RUNNING TOOL - ROTR | 41132017100 | 41132017800 | 41132018700 | 41132020000 | |
PULLING TOOL - ROTGR | 40051315000 | 40051317800 | 40051318700 | 40051318700 | |
EQUALIZING PRONGS | FISHING NECK SIZE | 1.187” | 1.187” | 1.187” | 1.187” |
RUNNING/PULLING TOOL | 4014011500 | 4014011500 | 4014011500 | 4014011500 | |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | |
ACCESSORY (PRODUCT CODE 41): | |||||
CHECK SET TOOL | 4102131710 | 4102132000 | 4102132000 | 4102132000 | |
NIPPLE SEAL BORE SIZE | 2.125” | 2.188” | 2.313” | 2.562” | |
ASSEMBLY NUMBER | 2111131321230 | 2111131321830 | 2111131323130 | 2111131325630 | |
ENGINEERING DATA | |||||
MAXIMUM OD (NO-GO) | 2.120” | 2.183” | 2.308” | 2.557” | |
OVER ALL LENGTH | 26.0” | 26.56”” | 26.56” | 32.53” | |
RUNNING TOOL - ROTR | 41132021200 | 41132021800 | 41132023100 | 41132025600 | |
PULLING TOOL - ROTGR | 40051318700 | 40051321800 | 40051323100 | 40051323100 | |
EQUALIZING PRONGS | FISHING NECK SIZE | 1.187” | 1.375” | 1.375” | 1.375” |
RUNNING/PULLING TOOL | 4014011500 | 4014012000 | 4014012000 | 4014012000 | |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | |
ACCESSORY (PRODUCT CODE 41): | |||||
CHECK SET TOOL | 4102132000 | 4102132180 | 4102132310 | 4102132560 | |
NIPPLE SEAL BORE SIZE | 2.750” | 2.813” | 3.437” | 3.688” | |
ASSEMBLY NUMBER | 2111131327530 | 2111131328130 | 2111131334330 | 2111131336830 | |
ENGINEERING DATA | |||||
MAXIMUM OD (NO-GO) | 2.745” | 2.808” | 3.432” | 3.683” | |
OVER ALL LENGTH | 28.13” | 28.13” | 28.13” | 37.15” | |
RUNNING TOOL - ROTR | 41132027500 | 41132028100 | 41132034300 | 41132036800 | |
PULLING TOOL - ROTGR | 40051327500 | 40051327500 | 40051331202 | 40051336804 | |
EQUALIZING PRONGS | FISHING NECK SIZE | 1.375” | 1.375” | 1.750” | 2.313” |
RUNNING/PULLING TOOL | 4014012000 | 4014012000 | 4014012500 | 4014013000 | |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | |
ACCESSORY (PRODUCT CODE 41): | |||||
CHECK SET TOOL | 4102133000 | 4102133000 | 4102133430 | 4102133680 | |
NIPPLE SEAL BORE SIZE | 3.813” | 4.125” | 4.313” | 4.562” | |
ASSEMBLY NUMBER | 2111131338130 | 2111131341230 | 2111131343130 | 2111131345630 | |
ENGINEERING DATA | |||||
MAXIMUM OD (NO-GO) | 3.808” | 4.120” | 4.308” | 4.557” | |
OVER ALL LENGTH | 37.38" | 38.1" | 38.61" | 38.6” | |
RUNNING TOOL - ROTR | 41132038100 | 41132041200 | 41132043100 | 41132045600 | |
PULLING TOOL - ROTGR | 40051336804 | 40051336804 | 40051336804 | 40051345600 | |
EQUALIZING PRONGS | FISHING NECK SIZE | 2.313” | 2.313” | 3.125” | 3.125” |
RUNNING/PULLING TOOL | 4014013000 | 4014013000 | 4014014000 | 4014014000 | |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | |
ACCESSORY (PRODUCT CODE 41): | |||||
CHECK SET TOOL | 4102133810 | 4102134120 | 4102134310 | 4102134560 | |
* Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision)
RELATED TOOLS
Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.