ROTR Lock Mandrel Assembly
Rebco ROTR Lock Mandrel is a Selective Set Lock to be set in ROTR Landing Nipple of the same Size.
Product Code: 10
Lock Mandrels with Safety Spring, and Interference Hold Down are available, see PRODUCT CODE 17 and 18
Applications
Setting selective flow control devices, plugs, and wireline tools in ROTR Landing Nipples at any target depth within a multi nipple completion string
High-flow completions where vibration risk is present, using the Product Code 17 Interference Hold Down variant
Large-bore completions from 3.437" to 4.813", using the Product Code 18 Safety Spring configuration
Any H2S environment requiring a material certified to NACE MR-01-75
Key Benefits
Selective set capability allows the lock to pass freely through deeper nipples and seat only at the intended nipple, eliminating unnecessary round trips.
Available across a broad size range of 1.500" through 4.813", covering the majority of production tubing sizes in common use.
Three product code variants (standard, Interference Hold Down, Safety Spring) address the full spectrum of well conditions, from routine to demanding high-pressure or high-flow environments.
Norm Alloy construction is suitable for H2S service and meets the latest revision of NACE MR-01-75.
Redress Kits are available for Product Code 17 and 18 variants, extending service life and reducing the total cost of ownership.
Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision)
NOTE: Lock Mandrels Sizes 3.437" - 4.813" without Safety Spring (Product 18) are Special Order Locks
TECHNICAL DATA
NIPPLE SEAL BORE | 1.500” | 1.710” | 1.781” | 1.875” | 2.000” |
ASSEMBLY NUMBER | 10132015030 | 10132017130 | 10132017830 | 10132018730 | 10132020030 |
ENGINEERING DATA | |||||
LOCK ID | .62” | .75” | .88” | .88” | .88” |
PACKING OD | 1.500” | 1.710” | 1.781” | 1.875” | 2.000” |
LENGTH | 13.4” | 13.4” | 13.4” | 13.4” | 13.4” |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy |
BOTTOM THREAD | 1 1/8” - 16 | 1 1/8” - 16 | 1 3/8” - 14 | 1 3/8” - 14 | 1 3/8” - 14 |
RUNNING TOOL - ROTR | 41132015000 | 41132017100 | 41132017800 | 41132018700 | 41132020000 |
PULLING TOOL - ROTGR | 40051315000 | 40051315000 | 40051317800 | 40051318700 | 40051318700 |
NIPPLE SEAL BORE | 2.125” | 2.188” | 2.313” | 2.562” | 2.750” |
ASSEMBLY NUMBER | 10132021230 | 10132021830 | 10132023130 | 10132025630 | 10132027530 |
ENGINEERING DATA | |||||
LOCK ID | .88” | 1.12” | 1.12” | 1.38” | 1.50” |
PACKING OD | 2.125” | 2.188” | 2.313” | 2.562” | 2.750” |
LENGTH | 13.4” | 13.8” | 13.8” | 13.3” | 13.7” |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy |
BOTTOM THREAD | 1 3/8” - 14 | 1 3/4” - 12 | 1 3/4” - 12 | 2”-12 SLB | 2 1/4”-12 SLB |
RUNNING TOOL - ROTR | 41132021200 | 41132021800 | 41132023100 | 41132025600 | 41132027500 |
PULLING TOOL - ROTGR | 40051318700 | 40051321800 | 40051323100 | 40051323100 | 40051327500 |
NIPPLE SEAL BORE | 2.813” | 2.875” | 3.125” | 3.437” | 3.688” |
ASSEMBLY NUMBER | 10132028130 | 10132028730 | 10132031230 | 10132034330 | 10132036830 |
ENGINEERING DATA | |||||
LOCK ID | 1.50” | 1.50” | 1.94” | 1.94” | 2.38” |
PACKING OD | 2.813” | 2.875” | 3.125” | 3.437” | 3.688” |
LENGTH | 13.7” | 13.7” | 13.7” | 14.2” | 14.37” |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy |
BOTTOM THREAD | 2 1/4”-12 SLB | 2 1/4”-12 SLB | 2 5/8”-12 SLB | 2 3/4”-12 SLB | 3 1/16”-12 SLB |
RUNNING TOOL - ROTR | 41132028100 | 41132028700 | 41132031200 | 41132034300 | 41132036800 |
PULLING TOOL - ROTGR | 40051327500 | 40051327500 | 40051331200 | 40051331200 | 40051336804 |
NIPPLE SEAL BORE | 3.813” | 4.125” | 4.313” | 4.562” | 4.813” |
ASSEMBLY NUMBER | 10132038130 | 10132041230 | 10132043130 | 10132045630 | 10132048130 |
ENGINEERING DATA | |||||
LOCK ID | 2.12” | 2.75” | 2.62” | 2.85” | 3.12” |
PACKING OD | 3.813” | 4.125” | 4.313” | 4.562” | 4.813” |
LENGTH | 14.77” | 14.38” | 14.39” | 14.92” | 14.6” |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy |
BOTTOM THREAD | 3 1/16”-12 SLB | 3 1/4”-12 SLB | 3 1/4”-12 SLB | 3 3/4”-12 SLB | 4”-12 SLB |
RUNNING TOOL - ROTR | 41132038100 | 41132041200 | 41132043100 | 41132045600 | 41132048100 |
PULLING TOOL - ROTGR | 40051336804 | 40051436804 | 40051336804 | 40051345600 | 40051345600 |
RELATED TOOLS
Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.