Glossary ROTFMH Plug Choke with Removable Mandrel (Top No-Go) ROTFMH Plug Choke with Removable Mandrel (Top No-Go) The Rebco ROTFMH Plug Choke with Removable Mandrel is a positive blank-off device designed to seal off pressure from both above and below, and is the large-bore Top No-Go removable mandrel plug in the BF Landing Nipple family. It is a Top No-Go device designed to be set in BF Landing Nipples and the upper seal bore of the ROTL Sliding Sleeve, and covers nipple seal bore sizes of 2.750", 2.813", 3.688", 3.750", and 3.813". The plug requires two runs to be set. Running and pulling are performed using the ROTGS Running and Pulling Tool, with the ROTM Running and Pulling Prong for the mandrel and the SB Equalizing Prong Running and Pulling Tool for the equalization prong. All sizes are constructed from Norm Alloy certified for H2S service per NACE MR-01-75. The ROTFMH extends the removable mandrel plug capability into the larger bore range that the ROTFWG family does not cover, spanning from 2.750" to 3.813" seal bore. The Lock Mandrel Fishing Neck sizes are 2.31" for the 2.750" and 2.813" seal bores, and 3.12" for the 3.688", 3.750", and 3.813" seal bores, with Equalizing Prong Fishing Neck sizes of 2.313" and 3.125" respectively. How to Order: Product Code 21. Specify nipple seal bore size, material, and service conditions. Running and Pulling tools: ROTGS , ROTM Prong (specify seal bore size), SB Equalizing Prong Running and Pulling Tool. Refer to Pages XVI-38 and XVI-39 for engineering data and tool numbers. Back to the Tool page PDF download ROTFMH Plug Choke with Removable Mandrel (Top No-Go) ROTFMH Plug Choke with Removable Mandrel (Top No-Go) Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary XNH & XOH Instrument Hanger Assembly XNH & XOH Instrument Hanger Assembly The Rebco XNH and XOH Instrument Hangers are the ROTX -family equivalents of the RNH and ROH , respectively, designed to deploy recording instruments into ROTXN and ROTX Landing Nipples. Like the RNH / ROH , both the XNH and XOH are built on a Lock Mandrel Assembly with a Protector Sleeve in place of a Seal Stack, the same no-seal, sleeve-protected design that minimizes wear and simplifies repeated survey operations. The XNH and XOH cover an even broader size range than the RNH / ROH , starting from a smaller minimum nominal size of 1.900", making them available for smaller-bore completions where the ROTRN / ROTR nipple profile is not present. They extend through to 5½" nominal, covering seal bore sizes from 1.500" to 4.562". The dedicated running and pulling tools are the ROTX Running Tool (Section III) and the ROTGR Pulling Tool (Section IV), selected by nominal size and seal bore size. All assemblies are manufactured from normal alloy in accordance with NACE MR-01-75 standards. How to Order: Specify XNH (for ROTXN nipples) or XOH (for ROTX nipples), nominal size, seal bore size, and box thread connection (Amerada ¾"–16 or Sucker Rod 15/16"–10). Contact Rebco for non-standard sizes and alternative materials. Back to the Tool page PDF download XNH & XOH Instrument Hanger Assembly XNH & XOH Instrument Hanger Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

DO & DD Tubular Jar Assembly Tool String DO & DD Tubular Jar Assembly DO & DD Tubular Jar Assembly Rebco Tubular Jar consists of a perforated tube for fluid by-pass, and a mandrel connected to the fishing neck. A telescoping mandrel is extended or collapsed within the tube by manipulating the Wireline at the surface, thus jarring action is produced. As in AO Link Jars , the intensity of jarring impact depends on the weight of Stem and wellbore conditions. Product Code: 102 REQUEST A QUOTE DOWNLOAD DATASHEET DO & DD Tubular Jar Assembly DO & DD Tubular Jar Assembly Click here Applications Jarring in debris-laden wellbores or wells with foreign matter in the fluid column Operations in large tubing or casing where link-type jars may buckle Fishing and baling operations require both upward and downward impact. Key Benefits Perforated tube design minimizes fluid resistance and debris interference. Effective in large tubing and casing where link jars may not perform reliably Available with a double fishing neck as a standard feature for added recovery options Multiple stroke length options available Rebco offers Tubular Jars with various Stroke lengths, Tool String Connections, and added feature of the double Fishing Neck. TECHNICAL DATA NOM SIZE (OD) STROKE ASSEMBLY PART NUMBER ENGINEERING DATA MAX OD CONNECTION FISHING NECK LENGTH Type ‘DO’ Tubular Jar - Threaded Connection 1/2” 6” 10203200500 .50” 3/8” - 16 NONE 13.5” 3/4” 6.0” 10203200750 .75” 1/2” - 13 .687” 14.0” 10.0” 10203200751 .750” 18.0” 1" 6.0” 10203201000 1.00” 5/8” - 11 14.2” 10.0” 10203201001 18.0” 14.0” 10203201002 26.0” 1 1/4” 20.0” 10203201252 1.25” 15/16” - 10 1.187” 32.12” 30.0” 10203201253 42.12” 1 1/2" 20.0” 10203201502 1.50” 1.375” 35.48” 24.0” 10203201524 39.48” 30.0” 10203201503 45.48” 1 3/4” 20.0” 10203201752 1.75” 1 1/16” - 10 1.750” 35.48” 30.0” 10203201753 45.48” 1 7/8” 20.0” 10203201872 1.88” 36.52” 24.0” 10203201824 40.52” 30.0” 10203201873 46.52” 2 1/8” 20.0” 10203202122 2.12” 43.54” 30.0” 10203202123 53.54” 2 1/2” 20.0” 10203202502 2.50” 2.313” 34.22” 10203202512 1 9/16” - 10 30.0” 10203202503 1 1/16” - 10 44.22” 10203202513 1 9/16” - 10 Type ‘DD’ Tubular Jar - 'QLS' Connection 1 1/4” 20.0” 10203141252 1.25” ‘RQLS’ 1.187” 33.88” 30.0” 10203031253 43.87” 1 1/2” 20.0” 10203031502 1.50” ‘RQLD’ 1.375” 38.48” 24.0” 10203031524 42.48” 30.0” 10203031503 48.48” 1 3/4” 20.0” 10203031752 1.75” 1.750” 37.23” 30.0” 10203031753 47.25” 1 7/8” 20.0” 10203031872 1.88” 38.27” 24.0” 10203031824 42.28” 30.0” 10203031873 46.52” 2 1/8” 20.0” 10203032122 2.12” 48.27” 30.0” 10203032123 55.29” 2 1/2” 20.0” 10203032502 2.50” 2.313” 38.13” 10203032512 RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

L-2D Kick-Over Tool Assembly Gas Lift - Kick Over Tools L-2D Kick-Over Tool Assembly L-2D Kick-Over Tool Assembly The Rebco L-2D Series Kickover Tool is a wireline service tool designed to install and retrieve compatible 1-in. and 1½-in. outside-diameter side-pocket subsurface-control devices in compatible Camco KBM and MM series side-pocket mandrels. Used with the appropriate running or pulling tool, the L-2D assembly uses locating and locking components to orient the tool string at the selected mandrel pocket. Spring-loaded centering arms help maintain alignment during the kickover sequence, positioning the attached service tool for controlled device installation or retrieval. Product Code: 194 REQUEST A QUOTE DOWNLOAD DATASHEET L-2D Kick-Over Tool Assembly L-2D Kick-Over Tool Assembly Click here Applications Install compatible 1-in. and 1½-in. OD side-pocket subsurface-control devices in approved side-pocket mandrels. Retrieve installed retrievable devices for replacement, inspection, or corrective well servicing. Position compatible running tools for deploying approved gas-lift valves, dummy valves, and other side-pocket flow-control devices. Position compatible pulling tools for removal of installed devices from the selected mandrel pocket. Key Benefits Accurate pocket positioning: The locating finger and spring-loaded centering arms help align the attached service tool with the selected side-pocket location. One tool for running and pulling: When configured with the appropriate compatible running or pulling tool, the L-2D supports both device installation and retrieval. Controlled kickover action: Locking dogs help hold the barrel assembly in the intended position while the service tool is moved into alignment with the mandrel pocket. Efficient device replacement: Supports wireline replacement of compatible retrievable devices, limiting the need for tubing-pulling work when the well configuration and operating procedure permit. Note Disclaimer: The L-2D Kickover Tool must be used with the appropriate compatible running or pulling tool. Device, mandrel, spacer-bar, and tool-string compatibility must be confirmed for the intended application. Available in 2 - 2 ½” to 3” Kick-over SPM Latch Running Tool Pulling Tool Pulling Spacer L-2D MMG RK RK-1 1 ⅝ in. JDS + Core extension 1 ½ in. SB 4 ¾ in. Redress Kits Available: Rebco offers Major & Minor redress kits and replacement components for L-2D Series Kickover Tools, including applicable locating, centering, locking, and kickover components. Provide the tool model and size to confirm the correct kit. TECHNICAL DATA NOMINAL SIZE 2” - 2 1/2” 3” ASSEMBLY NUMBER 194082032250 194082033000 KICK OVER TOOL TYPE L-2D L-2D PIN THREAD CONNECTION 15/16” – 10 15/16” – 10 FISHING NECK OD 1.187” 1.187” LENGTH 21” 21” MATERIAL Alloy Alloy RELATED TOOLS Running Tools for Gas Lift VIEW JDS Pulling Tool (Medium Reach) Assembly VIEW L Kick-Over Tool Assembly VIEW Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

AO Hay Pulley Assembly with 16” Sheave Surface Equipment AO Hay Pulley Assembly with 16” Sheave AO Hay Pulley Assembly with 16” Sheave Rebco Type AO Hay Pulley Assembly is used to control the wireline from a Wireline Unit to the Stuffing Box sheave, thus reducing the side pull force to the Lubricator stack. Rebco Type AO Hay Pulley is engineered to accept Rebco Type LW Line Wiper Assembly. Product code: 124. Available with Spokes or Solid Sheave. REQUEST A QUOTE DOWNLOAD DATASHEET AO Hay Pulley Assembly with 16” Sheave AO Hay Pulley Assembly with 16” Sheave Click here Different line sizes to be specified upon quote TECHNICAL DATA RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

HD Hold-Down (No-Blow) Tool Assembly 'BHP' Instrument Hangers HD Hold-Down (No-Blow) Tool Assembly HD Hold-Down (No-Blow) Tool Assembly Rebco HD Hold-Down Tool, or sometimes called No-Blow Tool, stops the instruments from being blown up the tubing when the well is flowing. The Tool also reduces the number of Stems required to keep the instruments in place. Product Code: 110 REQUEST A QUOTE DOWNLOAD DATASHEET HD Hold-Down (No-Blow) Tool Assembly HD Hold-Down (No-Blow) Tool Assembly Click here Applications Preventing the instrument assembly and tool string from being displaced upward by wellbore flow during BHP surveys in producing or active wells Reducing the total stem weight required to maintain instrument depth stability in flowing well conditions Any wireline survey operation where upward wellbore pressure or flow acts on the tool string Key Benefits Spring-loaded dogs grip the tubing wall to anchor the tool string against upward flow forces, the primary safeguard against blowback during live-well surveys. Reduces required stem weight by supplementing downward holding force with a mechanical dog grip Available from 1½" through 5½" nominal, covers the full range of production tubing sizes used in BHP survey work. Stainless Steel construction throughout for corrosion resistance in wellbore fluids Available in both Amerada (¾"–16) and Sucker Rod (15/16"–10) pin-box thread connections TECHNICAL DATA ‘HD’ Hold-Down (No-Blow) Tool Assembly: 1 1/2”– 5 1/2” with Amerada Connections NOMINAL SIZE 1 1/2” 2 3/8” 2 7/8” 3 1/2” 4 1/2” 5 1/2” ASSEMBLY NUMBER 11006032060 11006031870 11006032870 11006033500 11006034500 11006035500 ENGINEERING DATA: MAXIMUM OD BODY 1.25” 1.25” 1.25” 1.25” 1.75” 1.75” DOGS RETRACTED 1.25” 1.28” 1.29” 1.49” 1.92” 1.97” DOGS EXPANDED 1.81” 2.30” 2.51” .27” 4.29” 5.22” PIN-BOX THREAD CONNECTION 3/4” - 16 3/4” - 16 3/4” - 16 3/4” - 16 3/4” - 16 3/4” - 16 LENGTH DOGS RETRACTED 15.49” 15.49” 15.84” 15.85” 26.2” 26.2” DOGS EXPANDED 14.86” 14.86” 14.86” 14.86” 24.5” 24.5” WEIGHT REQUIRED TO RETRACT DOGS - lbs (kg) 9.0 (4.08) 9.0 (4.08) 10.0 (4.54) 11.0 (4.99) 25-30 (11.4) 25-30 (11.4) MATERIAL Stainless Stainless Stainless Stainless Stainless Stainless ‘HD’ Hold-Down (No-Blow) Tool Assembly: 1 1/2”– 5 1/2” with 15/16” - 10 Connections NOMINAL SIZE 1 1/2” 2 3/8” 2 7/8” 3 1/2” 4 1/2” 5 1/2” ASSEMBLY NUMBER 11006032061 11006031871 11006032871 11006033501 11006034501 11006035501 ENGINEERING DATA: MAXIMUM OD BODY 1.25” 1.25” 1.25” 1.25” 1.75” 1.75” DOGS RETRACTED 1.25” 1.28” 1.29” 1.49” 1.92” 1.97” DOGS EXPANDED 1.81” 2.30” 2.51” 3.27” 4.29” 5.22” PIN-BOX THREAD CONNECTION 15/16” - 10 15/16” - 10 15/16” - 10 15/16” - 10 15/16” - 10 15/16” - 10 LENGTH DOGS RETRACTED 17.51” 17.51” 17.86” 17.87” 26.32” 26.32” DOGS EXPANDED 16.88” 16.88” 16.88” 16.88” 24.62” 24.62” WEIGHT REQUIRED TO RETRACT DOGS - lbs (kg) 9.0 (4.08) 9.0 (4.08) 10.0 (4.54) 11.0 (4.99) 25-30 (11.4) 25-30 (11.4) MATERIAL Stainless Stainless Stainless Stainless Stainless Stainless RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

BF Landing Nipple Landing Nipples BF Landing Nipple BF Landing Nipple The Rebco BF Landing Nipple is a top no-go and selective landing profile designed to locate, lock, and seal compatible wireline-deployed downhole tools in the production tubing string. Its versatile internal profile accepts compatible selective and top no-go lock mandrels, making it suitable for instrument hangers, check valves, blanking plugs, chokes, and other flow-control devices. Multiple BF nipples may be installed at different depths, allowing equipment to be selectively positioned within the completion without disturbing tools set below. Product Code: 11 REQUEST A QUOTE DOWNLOAD DATASHEET BF Landing Nipple BF Landing Nipple Click here Applications The seating nipple may be used as a landing profile for a range of downhole completion and well-intervention devices, including: Installing blanking plugs to isolate the wellbore or facilitate pressure testing of the production tubing. Positioning subsurface-controlled safety valves, including velocity-operated SSCSVs. Installing equalizing check valves within the tubing string. Landing circulating blanking plugs for selected circulation and isolation procedures. Installing downhole chokes to manage flowing pressure, create a controlled pressure reduction, or help limit the risk of surface-line freezing during gas production. Supporting instrument hangers carrying downhole measurement equipment, including pressure and temperature memory gauges. When positioned above blast joints and used with a Model “A” polished nipple below the blast-joint section, the arrangement can accommodate separation sleeves for addressing localized blast-joint erosion or wear. Key Benefits Material flexibility: Available in material grades suitable for a variety of well environments and completion requirements, subject to the specified service conditions. Multiple landing configurations: Compatible with both top no-go and selective landing arrangements, providing flexibility in completion design. Protected sealing surface: The seal bore is shaped and finished to allow Chevron packing to pass through while reducing the likelihood of packing damage. Built-in locking profile: An integral locking groove provides a defined engagement point for compatible lock mandrels and downhole accessories. Tubing-compatible outer diameter: The external diameter is designed to correspond closely with the tubing-coupling envelope while providing mechanical properties comparable to N-80 tubing or higher. Turned-down diameter option: Components supplied with reduced outer diameters are matched to the dimensional and strength characteristics of turned-down N-80 couplings. Completion-design flexibility: Multiple nipples can be incorporated into one tubing string where selective locking systems are required, allowing equipment to be positioned at the intended depth. TECHNICAL DATA Tubing OD NIPPLE Seal Bore Size Min OD Inches mm Inches mm Inches mm 1.660 42.16 1.187 30.15 1.18 1.875 47.63 1.250 31.75 1.25 1.900 48.26 1.437 36.5 1.43 2.109 53.57 1.500 38.1 1.50 2 1/16 52.37 1.562 39.67 1.56 2.250 57.15 1.625 41.28 1.62 2 3/8 60.33 1.781 45.24 1.78 2.560 65.02 1.812 46.02 1.81 1.875 47.63 1.87 2 7/8 73.02 2.062 52.37 2.06 3.109 78.97 2.250 57.15 2.25 2.312 58.72 2.31 3 1/2 88.9 2.562 65.07 2.56 3.687 93.65 2.750 69.85 2.75 2.812 71.42 2.81 4 101.60 3.125 79.38 3.12 Coupling OD 3.250 82.55 3.25 3.312 84.12 3.31 4 1/2 114.30 3.688 93.68 3.68 3.750 95.25 3.75 3.812 96.82 3.81 5 127.0 4.000 101.60 4.00 4.125 104.78 4.12 4.312 109.52 4.31 5 1/2 139.70 4.562 115.87 4.56 4.750 120.65 4.75 6 5/8 168.28 5.250 133.35 5.25 5.500 139.70 5.50 7 177.80 5.750 146.05 5.75 5.953 151.21 5.95 7 5/8 193.68 6.125 155.58 6.12 6.375 161.92 6.37 RELATED TOOLS ROTFSB Instrument Hanger Assembly VIEW ROTFWB Instrument Hanger Assembly VIEW BR Landing Nipple VIEW Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

RJ Pulling Tool (Long Reach) Assembly Pulling Tools RJ Pulling Tool (Long Reach) Assembly RJ Pulling Tool (Long Reach) Assembly R Pulling Tool series are Shear Up design for external Fishing Neck. Rebco offers a wide range of sizes within this group of Pulling Tools. These Tools are offered with three basic reaches to retrieve the Sub-Surface devices with external Fishing Neck. Product Code: 40 REQUEST A QUOTE DOWNLOAD DATASHEET RJ Pulling Tool (Long Reach) Assembly RJ Pulling Tool (Long Reach) Assembly Click here Applications Retrieving R-Series profile devices where both short and medium reach have been confirmed insufficient Specialized lock mandrel or instrument hanger configurations with deeply recessed fishing necks Key Benefits Long-reach core provides the deepest engagement capability in the R-Series family. Same dog geometry and shear-up release as the RB and RS, operationally consistent across the entire R family Core replacement only for reach changes within the nominal size Three types of Tools with reach designation: RB - Short Reach RS - Medium reach RJ - Long Reach TECHNICAL DATA NOMINAL SIZE 1 1/4” 1 1/2” 1 3/4” 2” ASSEMBLY NUMBER 4013071250 4013071500 4013071750 4013072000 ENGINEERING DATA: MAXIMUM OD 1.22” 1.430” 1.562” 1.77” PIN THREAD CONNECTION 5/8” - 11 15/16” - 10 15/16” - 10 15/16” - 10 FISHING NECK OD 1.000” 1.187” 1.187” 1.375” BOTTOM THREAD (PRONG) 3/8” - 16 3/8” - 16 3/8” - 16 1/2” - 13 WILL ENGAGE FISHING NECK OD 1.000” 1.187” 1.187” 1.375” REACH 1.84” 2.55” 2.55” 2.63” LENGTH 13.30” 12.2” 12.2” 16.40” MATERIAL Alloy Alloy Alloy Alloy ACCESSORIES: PINNING TOOL ASS’Y 16711003 16711003 16711003 16711004 RELEASING TOOL 167004 167004 1670010 167005 CORE WRENCH 167023 167023 167023 167024 NOMINAL SIZE 2 1/2” 3” 3 1/2” 4” ASSEMBLY NUMBER 4013072500 4013073000 4013073500 4013074000 ENGINEERING DATA: MAXIMUM OD 2.18” 2.74” 3.11” 3.67” PIN THREAD CONNECTION 15/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 FISHING NECK OD 1.375” 2.313” 2.313” 2.313” BOTTOM THREAD (PRONG) 1/2” - 13 5/8” - 11 5/8” - 11 1 1/4” - 12 WILL ENGAGE FISHING NECK OD 1.750” 2.313” 2.750” 3.125” REACH 2.63” 2.69” 2.2” 2.80” LENGTH 16.36” 16.06” 15.87” 18.0” MATERIAL Alloy Alloy Alloy Alloy ACCESSORIES: PINNING TOOL ASS’Y 16711004 16711005 16711005 16711006 RELEASING TOOL 167006 167007 167009 167008 CORE WRENCH 167024 167025 167025 167026 RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

ROTHR Hydraulic (Soft Release) Running Tool Assembly Running Tools ROTHR Hydraulic (Soft Release) Running Tool Assembly ROTHR Hydraulic (Soft Release) Running Tool Assembly Rebco Type ROTHR Hydraulic (Soft Release) Running Tool is used to set ROTXNS and ROTRNS Soft Set Instrument Hangers (see PRODUCT CODE 33) into the Landing Nipples of the same nominal size and respective profile. NOTE: To compensate for the weight of the Instrument (s), use correct Number of Washers Product Code: 41 REQUEST A QUOTE DOWNLOAD DATASHEET ROTHR Hydraulic (Soft Release) Running Tool Assembly ROTHR Hydraulic (Soft Release) Running Tool Assembly Click here Applications Setting ROTXNS and ROTRNS Soft Set Bomb Instrument Hangers into ROTX and ROTR Landing Nipple profiles Wells or conditions where hydraulic release is preferred over mechanical release for instrument hanger installation Protecting sensitive BHP recording instruments from jar-induced shock during deployment and release Key Benefits The hydraulic soft-release mechanism provides jar-free, controlled release from the instrument hanger. Compatible with both ROTXNS and ROTRNS Soft Set Bomb Instrument Hanger families Available in five nominal sizes from 2" to 4½." Operator choice between ROTHR (hydraulic) and ROTMR (mechanical) based on well conditions TECHNICAL DATA NOMINAL SIZE 2” 2 1/2” 3” 3 1/2” 4 1/2” ASSEMBLY NUMBER 4106132000 4106132500 4106133000 4106133500 4106134500 ENGINEERING DATA: MAXIMUM OD 1.86” 2.00” 2.53” 3.09” 3.78” PIN THREAD CONNECTION 15/16” - 10 15/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 FISHING NECK OD 1.375” 1.750” 2.313” 2.750” 2.750” WILL ENGAGE FISHING NECK ID 1.38” 1.81” 2.31” 2.62” 3.12” LENGTH 19.0” 20.0” 20.2” 23.5” 23.7” MATERIAL Alloy Alloy Alloy Alloy Alloy RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

BO & BD Hydraulic Jar Assembly Tool String BO & BD Hydraulic Jar Assembly BO & BD Hydraulic Jar Assembly Rebco Hydraulic Jar is used to apply high impact force. The closed hydraulic system within the jar makes it possible for the jarring impact to be controlled. The intensity of the impact is proportionate to the full force on the Wireline and to the weight of Stem. Product Code: 102 REQUEST A QUOTE DOWNLOAD DATASHEET BO & BD Hydraulic Jar Assembly BO & BD Hydraulic Jar Assembly Click here Applications Providing assisted upward jarring in deviated wells where conventional jar-up action is limited Deep wells where high-viscosity fluid dampens the effectiveness of mechanical jars Any operation requiring a controlled, high-intensity upstroke impact force Key Benefits A closed hydraulic system allows the intensity of the upward impact to be controlled at the surface. Provides a superior upward jarring force compared to mechanical jars alone The hydraulic fluid specification can be adjusted to meet downhole temperature requirements. Available in 1¼"–2⅛" OD in standard threaded connections To activate the jars for next jarring impact, setting down the weight of the tool string, the internal metering of the hydraulic fluid sets the jars for activating force. Hydraulic fluid can be substituted to suit the needs of the operator; caution: should prevail to achieve the same end result. NOTE: Type 'BDK' also includes QLS Parts, Contact sales@rebcooiltools.com for more information about the BDK. TECHNICAL DATA NOMINAL SIZE (OD) ASSEMBLY PART NUMBER ENGINEERING DATA LENGTH CONNECTIONS FISHING NECK LENGTH Type ‘B O’ - Threaded Connection 1 1/4” 10201201250 1.25” 15/16” - 10 1.187” 29.0” 1 1/2” 10201201500 1.50” 15/16” - 10 1.375” 29.5” 1 3/4” 10201201750 1.75” 1 1/16” - 10 1.750” 32.64” 1 7/8” 10201201870 1.88” 2 1/8” 10201202120 2.12” 36.1” 2 1/2” 10201202500 2.50” 2.313” 36.75” 10201202501 1 9/16” - 10 Type ‘B D’ - QLS Connection 1 1/4” 10201141250 1.25” ‘RQLS’ 1.187” 30.63” 1 1/2” 10201031500 1.50” ‘RQLD’ 1.375” 31.12” 1 3/4” 10201031750 1.75” 1.750” 34.27” 1 7/8” 10201031870 1.88” 2 1/8” 10201032120 2.12” 37.75” 2 1/2” 10201032500 2.50” 2.313” 38.38” RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.