L-2D Kick-Over Tool Assembly
The Rebco L-2D Series Kickover Tool is a wireline service tool designed to install and retrieve compatible 1-in. and 1½-in. outside-diameter side-pocket subsurface-control devices in compatible Camco KBM and MM series side-pocket mandrels.
Used with the appropriate running or pulling tool, the L-2D assembly uses locating and locking components to orient the tool string at the selected mandrel pocket. Spring-loaded centering arms help maintain alignment during the kickover sequence, positioning the attached service tool for controlled device installation or retrieval.
Product Code: 194
Applications
Install compatible 1-in. and 1½-in. OD side-pocket subsurface-control devices in approved side-pocket mandrels.
Retrieve installed retrievable devices for replacement, inspection, or corrective well servicing.
Position compatible running tools for deploying approved gas-lift valves, dummy valves, and other side-pocket flow-control devices.
Position compatible pulling tools for removal of installed devices from the selected mandrel pocket.
Key Benefits
Accurate pocket positioning: The locating finger and spring-loaded centering arms help align the attached service tool with the selected side-pocket location.
One tool for running and pulling: When configured with the appropriate compatible running or pulling tool, the L-2D supports both device installation and retrieval.
Controlled kickover action: Locking dogs help hold the barrel assembly in the intended position while the service tool is moved into alignment with the mandrel pocket.
Efficient device replacement: Supports wireline replacement of compatible retrievable devices, limiting the need for tubing-pulling work when the well configuration and operating procedure permit.
Notes
Note Disclaimer: The L-2D Kickover Tool must be used with the appropriate compatible
running or pulling tool. Device, mandrel, spacer-bar, and tool-string compatibility must be confirmed for the intended application.
Available in 2 - 2 ½” to 3”
Kick-over | SPM | Latch | Running Tool | Pulling Tool | Pulling Spacer |
L-2D | MMG | RK | RK-1 | 1 ⅝ in. JDS + Core extension 1 ½ in. SB | 4 ¾ in. |
Redress Kits Available: Rebco offers Major & Minor redress kits and replacement components for L-2D Series Kickover Tools, including applicable locating, centering, locking, and kickover components. Provide the tool model and size to confirm the correct kit.
TECHNICAL DATA
NOMINAL SIZE | 2” - 2 1/2” | 3” |
ASSEMBLY NUMBER | 194082032250 | 194082033000 |
KICK OVER TOOL TYPE | L-2D | L-2D |
PIN THREAD CONNECTION | 15/16” – 10 | 15/16” – 10 |
FISHING NECK OD | 1.187” | 1.187” |
LENGTH | 21” | 21” |
MATERIAL | Alloy | Alloy |
Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.