AD Rope Sockets Tool String AD Rope Sockets AD Rope Sockets Rebco AD Rope Sockets are recommended to be used with .066" to .125" diameter Single Strand Wire. AD Rope Sockets are made up of AO Rope Socket Assembly a nd RQLD Bottom Sub-Assembly. Product Code: 100 REQUEST A QUOTE DOWNLOAD DATASHEET AD Rope Sockets AD Rope Sockets Click here Applications Suitable for any application that requires the AO rope socket, especially where faster tool string makeup and breakdown are priorities. Ideal for high-frequency, multi-run operations where minimizing rig-up time helps reduce overall job costs. Designed for heavy jarring operations that require a connection proven to withstand high cyclic impact loads. Key Benefits The RQLD Quick Lock connection enables tool-free, rapid makeup and breakdown on location. Double-shoulder design prevents accidental partial engagement. Self-washing locking mechanism performs reliably in sandy or debris-laden environments. Maintains full strength under high cyclic jarring loads. TECHNICAL DATA NOMINAL SIZE 1 1/2” 1 3/4” 1 7/8” 2” 2 1/8” 2 1/2” ASSEMBLY NUMBER 10000031500 10000031750 10000031870 10000032000 10000032120 10000032500 ENGINEERING DATA: FISHING NECK OD 1.375” 1.750” 1.750” 1.750” 1.750” 2.313” BOX CONNECTION 'RQLD' 'RQLD' 'RQLD' 'RQLD' 'RQLD' 'RQLD' MAXIMUM OD 1.38” 1.75” 1.88” 2.00” 2.12” 2.50” LENGTH 12.16” 12.16” 12.16” 12.16” 12.16” 12.16” MATERIAL Alloy Alloy Alloy Alloy Alloy Alloy RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

GSL Pulling Tool Assembly Pulling Tools GSL Pulling Tool Assembly GSL Pulling Tool Assembly Rebco GSL Pulling Tool is designed to retrieve ROTD Collar Lock Mandrel, see PRODUCT CODE 10. The tool can be released by jarring down. NOTE: GSL Pulling Tool has extended Core (longer reach), and it should be used only to retrieve ROTD Collar Lock Mandrel. Product Code: 40 REQUEST A QUOTE DOWNLOAD DATASHEET GSL Pulling Tool Assembly GSL Pulling Tool Assembly Click here Applications Retrieving internal fishing neck devices where the ROTGS standard reach is confirmed to be insufficient Deep-bore gas lift valves or other devices with the internal fishing neck positioned far below the device entry Key Benefits Long-reach core extends ROTGS capability to deeply recessed internal fishing necks. Identical shear-down release mechanism to the ROTGS, no new field procedures required Prevents the frustration of repeated failed engagement attempts with an insufficient-reach tool Retrieving Sub-Surface devices with Internal Fishing Necks; there are many occasions where a need for Shear Up to release Pulling Tool is an advantage. GU Shear-Up Adapter used with GS & GSL Pulling Tools converts the combined Tools to GR / GRL Pulling Tool Assembly respectively. GR Pulling Tool ( GS / GU ) can be released by upward jarring action. NOTE: When the GR tool is used, only the Shear Pin in the Shear-Up Adapter can be used. The Shear Pin must be removed from the GS portion of the Tool. This Shear Pin (in the GS Tool) cannot be sheared when the GU Shear-Up Adapter is attached to the GS Pulling Tool. TECHNICAL DATA NOMINAL SIZE 2” 2 1/2” 3” 4” ASSEMBLY NUMBER 4005140817800 4005140821800 4005140827500 4005140836804 ENGINEERING DATA: MAXIMUM OD 1.81” 2.16” 2.72” 3.62” PIN THREAD CONNECTION 15/16” - 10 15/16” - 10 1 1/16” - 10 1 1/16” - 10 FISHING NECK OD 1.375” 1.750” 2.313” 2.313” BOTTOM THREAD (PRONG) 1/2” - 13 5/8” - 11 5/8” - 11 2 1/8” - 12 WILL ENGAGE FISHING NECK ID 1.38” 1.81” 2.31” 3.12” REACH 3.50” 3.50” 3.62” 3.02” LENGTH 14.5” 14.75” 15.04” 14.15” MATERIAL Alloy Alloy Alloy Alloy ACCESSORIES: PINNING TOOL ASS’Y 167118 167112 167113 167113 RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

ROTF & ROTM (Top No-Go) Lock Mandrel Sub-Assembly Lock Mandrels ROTF & ROTM (Top No-Go) Lock Mandrel Sub-Assembly ROTF & ROTM (Top No-Go) Lock Mandrel Sub-Assembly Rebco ROTF & ROTM are Top No-Go, Lock Mandrel Sub-Assembly to be set into BF & BJ Landing nipples, and BL Sliding Sleeve. ROTF Lock is basically a ROTM Lock Sub-Assembly less the Packing Unit and Packing Mandrel. Product Code: 10 REQUEST A QUOTE DOWNLOAD DATASHEET ROTF & ROTM (Top No-Go) Lock Mandrel Sub-Assembly ROTF & ROTM (Top No-Go) Lock Mandrel Sub-Assembly Click here Applications Locking wireline retrievable downhole equipment in BF and BJ Landing Nipples, and in BL Sliding Sleeves, in 3 1/2" and 4 1/2" nominal tubing High-volume completions requiring large internal flow areas in the larger bore size range Applications requiring a full tubing pack-off using the ROTM with its integrated Packing Unit Applications requiring only positional locking without a pack-off, using the ROTF Key Benefits Extends the high-volume Top No-Go lock capability of the ROTG and ROTN families to the larger 3 1/2" and 4 1/2" nominal tubing range. The Internal Fishing Neck maximizes the bore flow area, supporting high-volume production throughout the completion. Collet-type locking fingers and Top No-Go shoulders provide reliable bidirectional restraint once set. ROTF and ROTM share the same ROTGS running and pulling tool across both nominal tubing sizes, reducing field tool inventory. ROTF , ROTM , ROTE , and ROTK Lock Mandrel Sub-Assemblies are devices used to position and secure Wireline retrievable downhole equipment into pre-set Tubing Nipples with appropriate profiles. The Locks provide a large flow areas through internal Fishing Neck. The Latch with Collet type locking fingers prevent upward movement, while No-Go shoulders prevent downward movement. Rebco ROTF and ROTM Lock Mandrel Sub-Assemblies are available in variety of Materials, suitable for down-hole conditions. TECHNICAL DATA RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

Glossary FO Collar Stop Tool Assembly FO Collar Stop Tool Assembly Rebco Collar Stops are wireline-set mechanical stops designed to seat and lock in a tubing collar recess, providing a positive, depth-referenced landing point in the wellbore. Once set at the collar, the stop serves as a physical platform for positioning, setting, or activating downhole tools. Collar stops are primarily used to provide a controlled, known depth reference for operations that require a tool to be held stationary at a precise elevation, such as when setting a wireline-conveyed plug, packer, or valve at a location relative to a known collar. The stop is set by jarring down to lock the collet fingers into the collar groove, and retrieved by jarring upward to disengage. Available with threaded connections and in multiple OD ranges to suit all standard tubing sizes. Back to the Tool page PDF download FO Collar Stop Tool Assembly FO Collar Stop Tool Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

BB Circulating Bottom Sub-Assembly Equalizing Sub-Assemblies BB Circulating Bottom Sub-Assembly BB Circulating Bottom Sub-Assembly Rebco BB Circulating Bottom Sub-Assemblies for use in BF Landing Nipple are to be used with Lock Mandrels ( See Section XIV ) ROTS , ROTW , ROTG , and ROTM with 'API' Cross Over Mandrel or Packing Mandrel and BB Seal Unit according to the Nominal Size. Rebco BB Circulating Bottom Sub-Assemblies for use in BR Landing Nipple are to be used with Lock Mandrels ( See Section XIV ) ROTZ , and ROTK with 'API' Cross Over Mandrel or Packing Mandrel and BB Seal Unit according to the Nominal Size. Product Code: 21 REQUEST A QUOTE DOWNLOAD DATASHEET BB Circulating Bottom Sub-Assembly BB Circulating Bottom Sub-Assembly Click here Applications Controlled fluid circulation from above in BF and BR Landing Nipple completions, covering seal bore sizes of 1.78" to 2.81." Completions requiring downward fluid circulation while maintaining pressure isolation from below Run-in and pull-out operations where the valve is held open to allow free fluid bypass, reducing hydraulic loading on the tool string Compatible with Lock Mandrels ROTS, ROTW, ROTG, and ROTM in BF nipples; and ROTZ and ROTK in BR nipples Key Benefits The ability to hold the valve open during run-in and pull-out significantly reduces hydraulic drag on the tool string, improving operational efficiency in fluid-filled completions. Pressure isolation from below is maintained while circulation from above remains possible, providing both isolation and fluid management in a single sub-assembly. Compatibility across both BF and BR Landing Nipple profiles, and with multiple lock mandrel types, makes the BB a versatile bottom sub for completions using multiple nipple profiles. Stainless and Alloy construction options available to suit service conditions. Circulating Bottom Sub-Assembly holds pressure from below while allowing circulation from above. It can be held open to bypass fluid while running and pulling. Product Code: 21 NOTE: When ordering Specify Lock Mandrel Size and Type to be used with, and Material to suit Down-hole conditions/requirement. For Part Numbers and Engineering Data see Section XVI - PLUG CHOKES TECHNICAL DATA DET PART NAME QTY 1 SEAL UNIT 1 Set 2 API Cross Over Mandrel 1 3 CIRCULATING VALVE 1 4 VALVE STEM 1 5 SPRING 1 6 RETAINER 1 7 SPRING 1 8 Type ‘A’ or ‘B’ CAGE 1 For Part Numbers and Engineering Data see Section XVI - PLUG CHOKES RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

Glossary AO & AD Knuckle Joint Assembly AO & AD Knuckle Joint Assembly AO Knuckle Joint (Threaded) The Rebco AO Knuckle Joint is a ball-and-socket articulating connector that provides up to 15° of angular flexibility within the wireline tool string. It is typically placed immediately above the working tool (running tool, pulling tool, or service tool) to allow that tool to align freely with the tubing bore rather than being held rigid by the tool string above. This angular compliance is particularly important in deviated or corkscrew tubing conditions, where a rigid tool string will bind against the tubing wall, preventing tools from reaching their target, reducing jarring effectiveness, or making it impossible to latch or unlatch downhole controls. When a significant deviation is present, additional knuckle joints can be placed between the stem and jars, and at every connection in the string as required. It is important to avoid placing excessive knuckle joints in the string; too many knuckle joints can redirect downward jarring force sideways into the tubing wall rather than downhole, reducing jar-down effectiveness. Every knuckle joint should have a fishing neck on the lower body to assist recovery in the event the ball-and socket connection separates downhole. Available in standard threaded connections from ⅜"–2½" OD, with optional double fishing neck. Critical: A knuckle joint is not a substitute for a swivel joint. A swivel provides rotational freedom under load with only 1°–5° of lateral movement. A knuckle joint provides 15° of angular movement but cannot rotate under load. If a knuckle joint is used where a swivel is needed and the wire parts, the rope socket fishing neck can fall over against the tubing wall at an angle, making recovery with a pulling tool extremely difficult or impossible. AD Knuckle Joint (RQLD) The Rebco AD Knuckle Joint is the RQLD double-shoulder quick-lock version of the Rebco AO , combining the same 15° ball and-socket angular flexibility with Rebco 's heavy-duty Quick Lock System connection. Available in RQLD connections, 1½"–2½" OD. Back to the Tool page PDF download AO & AD Knuckle Joint Assembly AO & AD Knuckle Joint Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

GS Pulling Tool Assembly Pulling Tools GS Pulling Tool Assembly GS Pulling Tool Assembly Rebco offers two Types of Pulling Tools for Internal Fishing Neck: GS with GSL Both Pulling Tool types are designed to run and retrieve Sub-Surface equipment with internal fishing neck. The tools can be released by jarring down. Rebco GS Pulling Tool is designed to run and retrieve Sub-Surface equipment with internal fishing neck. The tool can be released by jarring down. Product Code: 40 REQUEST A QUOTE DOWNLOAD DATASHEET GS Pulling Tool Assembly GS Pulling Tool Assembly Click here Applications Retrieving gas lift valves, dummy valves, and other devices with internal bore-type fishing necks Side pocket mandrel valve changeouts and selective completion maintenance operations Any sub-surface device where the fishing neck is recessed within the bore rather than projecting externally Key Benefits Core/prong engagement design, specifically engineered for internal fishing neck geometry, cannot be substituted for an external fishing neck tool. Shear-down release by downward jar provides positive tool string retrieval when devices are stuck. Available across a broad nominal size range for the majority of gas lift and selective completion tubing sizes Full field accessory set available, including Pinning Tool Assembly, Core Wrench, and Releasing Tool NOTE : Some Nominal Sizes have smaller OD for "Slim-Line" applications. TECHNICAL DATA NOMINAL SIZE 1 1/4” 1 1/2” 2” 2” 2 1/2” 2 1/2” 3” ASSEMBLY NUMBER 40051412500 40051415000 40051417800 40051418700 40051421800 40051423100 40051427500 ENGINEERING DATA: MAXIMUM OD 1.16” 1.47” 1.75” 1.81” 2.16” 2.25” 2.72” PIN THREAD CONNECTION 5/8” - 11 15/16” - 10 15/16” - 10 15/16” - 10 15/16” - 10 15/16” - 10 1 1/16” - 10 FISHING NECK OD 1.000” 1.187” 1.375” 1.375” 1.750” 1.750” 2.313” BOTTOM THREAD (PRONG) 3/8” - 16 1/2” - 13 1/2” - 13 1/2” - 13 5/8” - 11 5/8” - 11 5/8” - 11 WILL ENGAGE FISHING NECK ID .88” 1.06” 1.38” 1.38” 1.81” 1.81” 2.31” REACH 1.08” 1.62” 1.62” 1.62” 1.62” 1.62” 1.62” LENGTH 7.95” 11.75” 12.6” 12.6” 12.85” 12.85” 13.04” MATERIAL Alloy Alloy Alloy Alloy Alloy Alloy Alloy ACCESSORIES: PINNING TOOL ASS’Y 167115 167116 167118 167118 167112 167112 167113 NOMINAL SIZE 3 1/2” 4” 5” 6” 7” 7” ASSEMBLY NUMBER 40051431202 40051436804 40051445600 40051456200 40051458700 40051459600 ENGINEERING DATA: MAXIMUM OD 3.12” 3.62” 4.50” 5.56” 5.83” 5.88” PIN THREAD CONNECTION 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 FISHING NECK OD 2.313” 2.313” 3.125” 3.125” 3.125” 3.125” BOTTOM THREAD (PRONG) 1 3/8” - 12 2 1/8” - 12 2 1/2” - 10 2 3/4” - 10 3 5/8” - 10 3 5/8” - 10 WILL ENGAGE FISHING NECK ID 2.62” 3.12” 4.00” 4.75” 5.38” 5.38” REACH 1.62” 1.62” 1.62” 1.78” 1.86” 1.86” LENGTH 13.25” 13.25” 18.1” 20.7” 21.25” 21.25” MATERIAL Alloy Alloy Alloy Alloy Alloy Alloy ACCESSORIES: PINNING TOOL ASS’Y 167113 167113 167110 - - - RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

RC Rope Socket Assembly Tool String RC Rope Socket Assembly RC Rope Socket Assembly Rebco RC Rope Socket is designed to connect a Capsulated Line to the Tool String. The wear bushing and swivel design, prevent damage to the wire. The Capsulated Line is inserted through the wear bushing, and the Body. The clamp is tightened to the line and pulled into the Rope Socket. A connector sub is slipped over the bottom sub, a retainer is screwed and secured by a set screw. The bottom sub and the connector sub are made up to the Body. Product Code: 100 REQUEST A QUOTE DOWNLOAD DATASHEET RC Rope Socket Assembly RC Rope Socket Assembly Click here Applications Connecting the capsulated/flatpack cable to the tool string Operations where standard knot or wedge terminations are not suitable for the line type Key Benefits Clamp design accommodates a capsulated line that cannot be tied or wedged Integrated wear bushing protects the cable jacket from mechanical damage Built-in swivel prevents torsional stress transmission into the cable Alloy Material is used to manufacture Rebco ROPE SOCKETS. Materials suitable for specific well conditions are available. Must be ordered by Wire Size in use. Sizes not listed are also available, please enquire. TECHNICAL DATA NOMINAL SIZE ASSEMBLY NO. FISH NECK OD MAX OD BOX THD CONNECTION FOR CABLE SIZE LENGTH 1 1/2” 100130215001 1.375” 1.50” 15/16” – 10 Pin 1/8” 7.285” 1 1/2” 100130215002 1.375” 1.50” 1/4” 1/8” 7.285” RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

Glossary ROTAO Mechanical Tubing Perforator Assembly ROTAO Mechanical Tubing Perforator Assembly The Rebco Mechanical Tubing Perforator is a mechanical wireline-deployed tool designed to create flow ports through the wall of the production tubing at a specific depth without the use of explosive or shaped-charge perforating systems. The perforator mechanically drives a hardened punch through the tubing wall using downward jarring force, creating a controlled hole of precise diameter. This technique is used when communication between the tubing bore and the tubing-casing annulus is required, for example, to establish flow paths in a portion of the tubing that is no longer contributing to production, to create injection entry points for chemical treatment, or to establish pressure equalization ports in an isolated zone. The tool string must include adequate stem weight and a robust jar system to generate sufficient punch-through force, which varies with tubing wall thickness, grade, and OD. Multiple perforations can be placed at different depths in a single trip by running the tool to each target depth and reactivating. Tubing Perforator Stops (see below) are used in conjunction with the Tubing Perforator to control and limit the depth placement of each perforation. Back to the Tool page PDF download ROTAO Mechanical Tubing Perforator Assembly ROTAO Mechanical Tubing Perforator Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary ROTRZG-2 Plug Choke with Removable Mandrel (BOTTOM No-Go) ROTRZG-2 Plug Choke with Removable Mandrel (BOTTOM No-Go) The Rebco ROTRZG Plug Choke with Removable Mandrel is a positive blank-off device designed to seal off pressure from both above and below, and is the Bottom No-Go counterpart to the ROTFWG in the removable mandrel plug family. It is designed to be set in BR Landing Nipples, where the No-Go shoulder is located at the lower end of the nipple profile, providing a bottom-referenced depth stop rather than the top-referenced stop of the ROTFWG . The plug requires two runs to be set, and uses a different Lock type from the standard ROTFWG , which must be accounted for when ordering. It covers nominal sizes from 2" through 3-1/2". Construction is Alloy throughout, and the same ROTC-1 (with Locator Ring), ROTBG , SB , JDC , ROTRB , and JUC running and pulling tool system applies. A Redress Kit with V-Packing (6 pieces) is available for all sizes, and pulling tool bore-pass restrictions apply and must be reviewed before planning retrieval operations. How to Order: Product Code 21 or 22. Specify nominal size, seal bore size, Running Tool type, Pulling Tool type, Pulling Probe, material, and service conditions. Note that the lock type differs from the ROTFWG and must be specified. Review pulling tool bore-pass restrictions. Refer to Pages XVI-33 through XVI-37. Back to the Tool page PDF download ROTRZG-2 Plug Choke with Removable Mandrel (BOTTOM No-Go) ROTRZG-2 Plug Choke with Removable Mandrel (BOTTOM No-Go) Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.