Valve ROTXXN Plug Choke Assembly Valve ROTXXN Plug Choke Assembly Valve ROTXXN Plug Choke Assembly Rebco ROTXXN Plug Choke Assembly, when landed in ROTXN Landing Nipple , of the same size, will plug off the nipple and tubing. The Plug Choke is capable of holding pressure differentials from above or below. NOTE: Valve ROTXXN Plug Choke Assembly is made up of ROTXN Lock Mandrel (PRODUCT CODE 10, 17, and/or 18) and ROTX Equalizing Valve Sub-Assembly with a Cap (PRODUCT CODE 20) . Product Code: 20 Read More DOWNLOAD DATASHEET REQUEST A QUOTE Valve ROTXXN Plug Choke Assembly Valve ROTXXN Plug Choke Assembly Click here TOOL APPLICATION Applications Plugging and pressure isolation from both above and below in ROTXN Landing Nipples, across seal bore sizes of 1.500" through 4.562." Small-bore completions beginning at 1.500" seal bore where a No-Go landing profile is present. Single-run plug setting with a positive mechanical depth stop for confirmed nipple positioning H2S service environments requiring Norm Alloy construction Key Benefits The No-Go bottom shoulder adds positive mechanical depth confirmation to the small-bore ROTXN nipple range. Single-run setting, identical to the ROTXX, maintaining operational efficiency. Shares all tool numbers with the ROTXX series, keeping cross-family field inventory simple. Check Set Tool (Product Code 41) is available for all sizes. Available in a variety of materials to suit downhole conditions. Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NIPPLE SEAL BORE SIZE 1.500” 1.625” 1.875” 2.313” ASSEMBLY NUMBER 2018181015030 2018181016230 2018181018730 2018181023130 ENGINEERING DATA MAXIMUM OD (NO-GO) 1.495” 1.620” 1.870” 2.307” LOCK MANDREL FISHING NECK ID 1.06” 1.06” 1.38” 1.81” RUNNING TOOL - ROTX 41182015000 41182016200 41182018700 41182023100 PULLING TOOL - ROTGR 40051315000 40051315000 40051318700 40051323100 EQUALIZING PRONGS RUNNING 49121324 4912496 4912505 4911793 PULLING 49122037 49122035 49122044 49122078 LENGTH 22.75” 22.75” 20.28” 20.75” MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY (PRODUCT CODE 41) : CHECK SET TOOL 4102181500 4102181500 4102181870 4102182310 NIPPLE SEAL BORE SIZE 2.750” 2.813” 2.875” 3.313” ASSEMBLY NUMBER 2018181027530 2018181028130 2018181028730 2018181033130 ENGINEERING DATA MAXIMUM OD (NO-GO) 2.745” 2.808” 2.870” 3.307” LOCK MANDREL FISHING NECK ID 2.31” 2.31” 2.31” 2.62” RUNNING TOOL - ROTX 41182027500 41182028100 41182028700 41182033100 PULLING TOOL - ROTGR 40051327500 40051327500 40051327500 40051331202 EQUALIZING PRONGS RUNNING 4912599 4912599 4912599 4911762 PULLING 49122043 49122043 49122043 4911763 LENGTH 20.77” 20.77” 20.77” 23.8” MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( (PRODUCT CODE 41) : CHECK SET TOOL 4102183000 4102183000 4102183000 4102183310 NIPPLE SEAL BORE SIZE 3.688” 3.813” 4.313” 4.562” ASSEMBLY NUMBER 2018181036830 2018181038130 2018181043130 2018181045630 ENGINEERING DATA MAXIMUM OD (NO-GO) 3.682” 3.807” 4.307” 4.556” LOCK MANDREL FISHING NECK ID 3.12” 3.12” 3.12” 4.00” RUNNING TOOL - ROTX 41182036800 41182038100 41182043100 41182045600 PULLING TOOL - ROTGR 40051336804 40051336804 40051336804 40051345600 EQUALIZING PRONGS RUNNING 4911826 4911640 4911640 4911805 PULLING 4911827 4911641 4911641 4911944 LENGTH 21.88” 21.88” 22.0” 23.99” MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( (PRODUCT CODE 41) : CHECK SET TOOL 4102183680 4102183810 4102184310 4102184560 * Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision) RELATED TOOLS The Plug requires ONE run to be set. Plug Chokes are available in a variety of Materials, suitable for down-hole conditions.

Wireline/Slickline Equipment Categories ALL PRODUCTS All Wireline/Slickline Equipment and Tools Tool String A Wireline Tool String is made up of set Tools (Work String) to do specific Wireline operations down-hole. Service Tools Service Tools are engineered for either singular or multi-functional applications in wireline operations. Running Tools Running Tools were designed primarily to set or position downhole flow controls and devices to a predetermined depth in the well by Wireline methods. Pulling Tools Pulling Tools were designed primarily to retrieve subsurface locking devices and other downhole Wireline Service Equipment from the tubing bore. Shifting Tools Shifting Tools were designed primarily to open or close inner sleeve in several types of Sliding Sleeves. 'BHP' Instrument Hangers BHP (Bottom Hole Pressure) is a vital part of Wireline Operations. Monitoring the BHP requires specialty tools. Test Tools and Check Valves Test Tools & Check Valves are generally used to test tubing, locate leaks, or set hydraulic-set packers. The Tools are designed to hold pressure from above Gas Lift - Kick Over Tools Gas Lift operations are efficient and cost efficient means of optimizing the production rates of the wells. Landing Nipples Landing Nipples are installed in the well bore as a part of the completion string to provide for the location of various Wireline Flow Control devices. Lock Mandrels Lock Mandrels were designed to land and set into downhole pre-positioned Landing Nipples (see Section XIII) in the well. Equalizing Sub-Assemblies Equalizing Sub-Assemblies provide means of equalizing pressure across Sub-Surface Controls such as Locking Mandrels and Tubing Mandrels. Plug Assemblies The design, using the Lock Mandrel and Equalizing Sub-Assembly, is to plug the tubing and hold differential pressures from above and below ... Surface Equipment (under process)

ROTRXN Running Tool Assembly ROTRXN Running Tool Assembly ROTRXN Running Tool Assembly Rebco ROTRXN Running Tool is the same as ROTRX in its function; the difference is that ROTRXN utilizes Retainer Dogs instead of the Lugs to attach the Lock Mandrel. Rebco ROTRX Running Tool is designed to set Types: ROTR , ROTRN , ROTRQ , ROTRPT , ROTRNT , ROTX & ROTXN Locking Mandrels into its respective Nipple profiles. This Running Tool is generally used to install tubing safety valves in the uppermost Landing Nipples. This Running Tool is generally used to install tubing safety valves in the uppermost Landing Nipples. Product Code: 41 Read More DOWNLOAD DATASHEET REQUEST A QUOTE ROTRXN Running Tool Assembly ROTRXN Running Tool Assembly Click here TOOL APPLICATION Applications All applications are identical to the ROTRX, where the lock mandrel attachment interface uses Retainer Dogs rather than Lugs. Setting ROTR, ROTRN, ROTRQ, ROTRPT, ROTRNT, ROTX, and ROTXN Lock Mandrels with retainer dog attachment Key Benefits The Retainer Dog interface provides a secure mechanical connection for mandrels designed for dog-style engagement. Functionally identical operation to the ROTRX, operators already familiar with ROTRX will require no additional training. Same broad size range and mandrel type compatibility as the ROTRX Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOM SIZE LOCK MANDREL GUIDE ASSEMBLY PART NUMBER FISHING NECK TO ENGAGE ENGINEERING DATA TYPE SIZE ACTUAL OD FISHING NECK CONNECTION LENGTH PIN BOTTOM 3” ‘ROTX’ 2.750” 41131827511 2.31” 2.62” 2.313” 1 1/16” - 10 1 1/4” - 12 24.2” ‘ROTR’ 2.875” 41131828710 4” ‘ROTX’ 3.688” 41131836810 3.12” 3.62” 1 7/8” - 12 24.7” ‘ROTR’ ‘ROTX’ 3.813” 41131838110 2 1/8” - 12 ‘ROTR’ 41131838112 1 5/8” - 12 ‘ROTRQ’ 41131838111 2 1/8” - 12 ‘ROTR’ 4.000” 41131840010 1 7/8” - 12 ‘ROTR’ 4.125” 41131841210 2 1/8” - 12 ‘ROTRQ’ ‘ROTX’ 4.313” 41131843110 ‘ROTR’ 5” ‘ROTX’ 4.562” 41131845610 4.000” 4.50” 3.125” 2 1/2” - 10 24.8” ‘ROTRQ’ 41131845611 ‘ROTR’ 5.250” 41131852510 3” - 10 ‘ROTRNT’ 5.963” 41131859614 25.9” ‘ROTR’ 5.875” 411318105870 5.37” 3 3/8” - 12 29.31” 7” ‘ROTRQ’ 5.875” 41131858711 5.375” 5.81” 26.7” ‘ROTR’ 5.963” 41131859610 ‘ROTRQ’ ‘ROTRQ’ 6.000” 41131860010 3 3/8” - 10 RELATED TOOLS

ROTR Running Tool Assembly ROTR Running Tool Assembly ROTR Running Tool Assembly The Rebco ROTR Running Tool is engineered to run, locate, and set all ROTR and ROTRN sub-surface tools within their respective nominal sizes. It ensures precise engagement and secure deployment, offering dependable performance for various well intervention applications. Product Code: 41 Read More DOWNLOAD DATASHEET REQUEST A QUOTE ROTR Running Tool Assembly ROTR Running Tool Assembly Click here TOOL APPLICATION Applications Running, locating, and setting all Type ROTR and ROTRN Lock Mandrels and sub-surface tools Installing tubing safety valves in the uppermost landing nipples of the completion string Running No-Go Locks where the keys, not the Running Tool dogs, locate the nipple Sour service (H₂S) well interventions where Inconel springs are required Key Benefits A positive mechanical surface indication confirms that the lock mandrel is fully set before releasing. Covers 26 nominal sizes from 1.375" to 4.813" — one of the broadest size ranges in the Rebco running tool family Inconel springs standard on all sizes, providing H₂S sour-service compatibility. Can set ROTR, ROTRN, ROTRQ, ROTRPT, ROTRNT, ROTX*, and ROTXN* Lock Mandrels The dog-in OD keeps the tool within the tubing bore without restriction during the trip in Assembly Sleeve and Test Sleeve accessories are available for each nominal size. Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOMINAL SIZE 1.375” 1.500” 1.710” 1.781” 1.875” 2.000” 2.125” 2.188” ASSEMBLY NUMBER 41132013700 41132015000 41132017100 41132017800 41132018700 41132020000 41132021200 41132021800 ENGINEERING DATA: MAXIMUM OD (DOGS IN) 1.28” 1.47” 1.64” 1.75” 1.75” 1.94” 2.06” 2.17” PIN THREAD CONNECTION 5/8” - 11 15/16” - 10 15/16” - 10 15/16” - 10 15/16” - 10 15/16” - 10 15/16” - 10 15/16” - 10 FISHING NECK OD 1.000” 1.187” 1.187” 1.375” 1.375” 1.375” 1.375” 1.750” BOTTOM THREAD 3/8” - 16 3/8” - 16 3/8” - 16 1/2” - 13 1/2” - 13 1/2” - 13 1/2” - 13 5/8” - 11 LENGTH 29.4” 30.9” 30.9” 30.0” 30.0” 30.0” 30.0” 31.2” MATERIAL Alloy Alloy Alloy Alloy Alloy Alloy Alloy Alloy ACCESSORIES: Assembly Sleeve (NS) 167151413137 167151413150 167151413150 167151413200 167151413200 167151413200 167151413250 167151413250 Test Sleeve (NS) 1671514137 1671514150 1671514171 1671514178 1671514187 1671514200 1671514212 1671514218 NOMINAL SIZE 2.313” 2.562” 2.750” 2.813” 2.875” 3.125” 3.250” 3.437” ASSEMBLY NUMBER 41132023100 41132025600 41132027500 41132028100 41132028700 41132031200 41132032500 41132034300 ENGINEERING DATA: MAXIMUM OD (DOGS IN) 2.17” 2.50” 2.69” 2.69” 2.84” 3.10” 3.19” 3.41” PIN THREAD CONNECTION 15/16” - 10 15/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 FISHING NECK OD 1.750” 1.750” 2.313” 2.313” 2.313” 2.313” 2.313” 2.313” BOTTOM THREAD 5/8” - 11 5/8” - 11 3/4” - 10 3/4” - 10 3/4” - 10 1 3/8” - 12 1 3/8” - 12 1 3/8” - 12 LENGTH 31.2” 31.2” 32.0” 32.0” 32.0” 33.38” 33.38” 33.8” MATERIAL Alloy Alloy Alloy Alloy Alloy Alloy Alloy Alloy ACCESSORIES: Assembly Sleeve (NS) 167151413250 167151413300 167151413300 167151413300 167151413300 167151413400 167151413400 167151413400 Test Sleeve (NS) 1671514231 1671514256 1671514275 1671514281 1671514287 1671514312 1671514325 1671514343 NOMINAL SIZE 3.688” 3.813” 4.000” 4.125” 4.313” 4.562” 4.750” 4.813” ASSEMBLY NUMBER 41132036800 41132038100 41132040000 41132041200 41132043100 41132045600 41132047500 41132048100 ENGINEERING DATA: MAXIMUM OD (DOGS IN) 3.62” 3.75” 3.94” 3.94” 4.28” 4.50” 4.69” 4.75” PIN THREAD CONNECTION 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 FISHING NECK OD 2.313” 2.313” 2.313” 2.313” 2.313” 3.125” 3.125” 3.125” BOTTOM THREAD 1 7/8” - 12 1 5/8” - 12 1 7/8” - 12 2 1/8” - 12 2 1/8” - 12 2 3/16” - 12 2 1/2” - 10 2 1/2” - 10 LENGTH 33.3” 33.3” 33.38” 33.38” 33.3” 33.3” 33.3” 33.3” MATERIAL Alloy Alloy Alloy Alloy Alloy Alloy Alloy Alloy ACCESSORIES: Assembly Sleeve (NS) 167151413450 167151413450 167151413450 167151413450 167151413450 167151413550 167151413550 167151413550 Test Sleeve (NS) 1671514368 1671514381 1671514400 1671514412 1671514431 1671514456 1671514475 1671514481 RELATED TOOLS All Rebco Tools have Inconel© Springs - Tools are suitable for H 2 S Service

Wireline and Slickline Tools & Equipment: Tool String, Service Tools, Running & Pulling tools, Shifting Tools, Lock Mandrels, Gas Lift - Kick Over Tools, Test Tools & Check Valves, Landing Nipples, Plug & Equalizing sub assemblies CATALOGS ALL PRODUCTS DOWNLOAD Tool String DOWNLOAD Service Tools DOWNLOAD Running Tools DOWNLOAD Pulling Tools DOWNLOAD Shifting Tools DOWNLOAD 'BHP' Instrument Hangers DOWNLOAD Test Tools and Check Valves DOWNLOAD Gas Lift - Kick Over Tools DOWNLOAD Landing Nipples DOWNLOAD Lock Mandrels DOWNLOAD Equalizing Sub-Assemblies DOWNLOAD

XNH & XOH Instrument Hanger Assembly XNH & XOH Instrument Hanger Assembly XNH & XOH Instrument Hanger Assembly Rebco XNH Instrument Hanger Assembly is used to land and lock geophysical instruments in ROTXN Landing Nipples respectively, to allow recording of reservoir data. Rebco XOH Instrument Hanger Assembly is used to land and lock geophysical instruments in ROTX Landing Nipples respectively, to allow recording of reservoir data. Product Code: 33 Read More DOWNLOAD DATASHEET REQUEST A QUOTE XNH & XOH Instrument Hanger Assembly XNH & XOH Instrument Hanger Assembly Click here TOOL APPLICATION Applications Deploying BHP recording instruments into ROTXN nipples (XNH) or ROTX nipples (XOH) Small-bore completions requiring instrument hanger capability from 1.900" nominal and upward Sour service environments requiring NACE-compliant construction Key Benefits Covers the widest nominal size range of any Rebco instrument hanger from 1.900" through 5½." The Protector Sleeve design eliminates the Seal Stack and O-Ring Seal, simplifying assembly and reducing consumable usage. ROTX Running Tool and ROTGR Pulling Tool provide a complete, dedicated run-and-retrieve pair NACE MR-01-75 alloy construction standard across all sizes Lock mandrel parts are available separately for field repair. Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOM SIZE SEAL BORE SIZE ASSEMBLY NUMBER LOCK MANDREL SUB-ASS’Y PROTECTOR SLEEVE HANGER SUB BOX THREAD BOX THREAD w/3/4” - 16 w/15/16” - 10 3/4” - 16 15/16” - 10 Type ‘XNH’ Instrument Hanger 1.900” 1.500” 3318100615030 3318100615031 10181015030 33001 33201815030 33201815031 2 1/16” 1.625” 3318100616230 3318100616231 10181016230 33002 33201816230 33201816231 2 3/8” 1.875” 3318100618730 3318100618731 10181018730 33005 33201818730 33201818731 2 7/8” 2.313” 3318100623130 3318100623131 10181023130 33009 33201823130 33201823131 3 1/2” 2.750” 3318100627530 3318100627531 10181027530 330012 33201827530 33201827531 2.813” 3318100628130 3318100628131 10181028130 330012 33201828130 33201828131 2.875” 3318100628730 3318100628731 10181028730 330012 33201828730 33201828731 4” 4 1/2" 3.313” 3318100633130 3318100633131 18181033130 330013 33201833130 33201833131 3.813” 3318100638130 3318100638131 18181038130 330015 33201838130 33201838131 5” 5 1/2" 4.313” 3318100643130 3318100643131 18181043130 330017 33201843130 33201843131 4.562” 3318100645630 3318100645631 18181045630 330018 33201845630 33201845631 Type ‘XOH’ Instrument Hanger 1.900” 1.500” 3318200615030 3318200615031 10182015030 33001 33201815030 33201815031 2 1/16” 1.625” 3318200616230 3318200616231 10182016230 33002 33201816230 33201816231 2 3/8” 1.875” 3318200618730 3318200618731 10182018730 33005 33201818730 33201818731 2 7/8” 2.313” 3318200623130 3318200623131 10182023130 33009 33201823130 33201823131 3 1/2” 2.750” 3318200627530 3318200627531 10182027530 330012 33201827530 33201827531 2.813” 3318200628130 3318200628131 10182028130 330012 33201828130 33201828131 2.875” 3318200628730 3318200628731 10182028730 330012 33201828730 33201828731 4” 4 1/2" 3.313” 3318200633130 3318200633131 18182033130 330013 33201833130 33201833131 3.813” 3318200638130 3318200638131 18182038130 330015 33201838130 33201838131 5” 5 1/2" 4.313” 3318200643130 3318200643131 18182043130 330017 33201843130 33201843131 4.562” 3318200645630 3318200645631 18182045630 330018 33201845630 33201845631 RELATED TOOLS The Instrument Hanger Assembly consists of Lock Mandrel Assembly (DET 1), Protector Sleeve (DET 3) and a Hanger Sub (DET 2); offered with Amerada (3/4" - 16) Box connection and/or Sucker Rod (15/16" - 10) Box connection. NOTE: Lock Mandrel does not require Seal Stack or 'O' Ring Seal; instead, a Protector Sleeve is supplied to minimize the damage to the Packing Mandrel. A list of Assembly Sizes shown are not limited to the availability of other Sizes required, or Materials to suit well conditions. Please specify when ordering. RUNNING AND PULLING TOOLS REQUIRED: Select by Nominal Size - Seal Bore Size Running Tool: ROTX , Section III, Product Code 41 Pulling Tool: ROTGR , Section IV, Product Code 40

This Glossary by Rebco Oil Tools, Inc. explains common wireline and slickline terms used in well intervention, service tools, and specialty tools. Designed for oil and gas professionals who work with tool strings, slickline and wireline equipment, it supports faster training, clearer communication, and better equipment selection. best wireline & slickline tools equipment in Canada. X & R lock mandrels, JUC and JUS pulling tools for downhole oil & gas Wireline and Slickline Tools & Equipment --- GLOSSARY --- ALL PRODUCTS All Wireline/Slickline Equipment and Tools View more Tool String A Wireline Tool String is made up of set Tools (Work String) to do specific Wireline operations down-hole. View more Service Tools Service Tools are engineered for either singular or multi-functional applications in wireline operations. View more Running Tools Running Tools were designed primarily to set or position downhole flow controls and devices to a predetermined depth in the well by Wireline methods. View more Pulling Tools Pulling Tools were designed primarily to retrieve subsurface locking devices and other downhole Wireline Service Equipment from the tubing bore. View more Shifting Tools Shifting Tools were designed primarily to open or close inner sleeve in several types of Sliding Sleeves. View more 'BHP' Instrument Hangers BHP (Bottom Hole Pressure) is a vital part of Wireline Operations. Monitoring the BHP requires specialty tools. View more Test Tools and Check Valves Test Tools & Check Valves are generally used to test tubing, locate leaks, or set hydraulic-set packers. The Tools are designed to hold pressure from above View more Gas Lift - Kick Over Tools Gas Lift operations are efficient and cost efficient means of optimizing the production rates of the wells. View more Landing Nipples Landing Nipples are installed in the well bore as a part of the completion string to provide for the location of various Wireline Flow Control devices. View more Lock Mandrels Lock Mandrels were designed to land and set into downhole pre-positioned Landing Nipples (see Section XIII) in the well. View more Equalizing Sub-Assemblies Equalizing Sub-Assemblies provide means of equalizing pressure across Sub-Surface Controls such as Locking Mandrels and Tubing Mandrels. View more

Valve ROTXX Plug Choke Assembly Plug Assemblies Valve ROTXX Plug Choke Assembly Valve ROTXX Plug Choke Assembly Rebco ROTXX Plug Choke Assembly, when landed in Type ROTX Landing Nipple , of the same size, will plug off the nipple and tubing. The Plug Choke is capable of holding pressure differentials from above or below. NOTE: Valve ROTXX Plug Choke Assembly is made up of ROTX Lock Mandrel (PRODUCT CODE 10, 17, and/or 18) and ROTX Equalizing Valve Sub-Assembly with a Cap (PRODUCT CODE 20) . Product Code: 20 Read More DOWNLOAD DATASHEET REQUEST A QUOTE Valve ROTXX Plug Choke Assembly Valve ROTXX Plug Choke Assembly Click here TOOL APPLICATION Applications Plugging and pressure isolation from both above and below in ROTX Landing Nipples, across seal bore sizes of 1.500" through 4.562." Small-bore completions beginning at 1.500" seal bore, where the ROTX nipple profile is the completion standard Single-run plug setting for efficient wireline operations H2S service environments requiring Norm Alloy construction Key Benefits The smallest available seal bore coverage in the valve-type plug choke family, starting at 1.500", addresses velocity strings and small-diameter production tubing not served by the ROTRR series. Single-run setting reduces the number of wireline trips required. ROTX-specific Running and Pulling Tools, Equalizing Prongs, and Check Set Tools are fully specified per size in the engineering data tables. Bidirectional pressure holding provides complete tubing isolation. Available in a variety of materials to suit downhole conditions. Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NIPPLE SEAL BORE SIZE 1.500” 1.625” 1.875” 2.313” ASSEMBLY NUMBER 20181815030 20181816230 20181818730 20181823130 ENGINEERING DATA MAXIMUM OD (NO-GO) 1.495” 1.620” 1.870” 2.307” LOCK MANDREL FISHING NECK ID 1.06” 1.06” 1.38” 1.81” RUNNING TOOL - ROTX 41182015000 41182016200 41182018700 41182023100 PULLING TOOL - ROTGR 40051315000 40051315000 40051318700 40051323100 EQUALIZING PRONGS RUNNING 49121324 4912496 4912505 4911793 PULLING 49122037 49122035 49122044 49122078 LENGTH 22.75” 22.75” 20.28” 20.75” MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY (PRODUCT CODE 41) : CHECK SET TOOL 4102181500 4102181500 4102181870 4102182310 NIPPLE SEAL BORE SIZE 2.750” 2.813” 2.875” 3.313” ASSEMBLY NUMBER 20181827530 20181828130 20181828730 20181833130 ENGINEERING DATA MAXIMUM OD (NO-GO) 2.745” 2.808” 2.870” 3.307” LOCK MANDREL FISHING NECK ID 2.31” 2.31” 2.31” 2.62” RUNNING TOOL - ROTX 41182027500 41182028100 41182028700 41182033100 PULLING TOOL - ROTGR 40051327500 40051327500 40051327500 40051331202 EQUALIZING PRONGS RUNNING 4912599 4912599 4912599 4911762 PULLING 49122043 49122043 49122043 4911763 LENGTH 20.77” 20.77” 20.77” 23.8” MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( (PRODUCT CODE 41) : CHECK SET TOOL 4102183000 4102183000 4102183000 4102183310 NIPPLE SEAL BORE SIZE 3.688” 3.813” 4.313” 4.562” ASSEMBLY NUMBER 20181836830 20181838130 20181843130 20181845630 ENGINEERING DATA MAXIMUM OD (NO-GO) 3.682” 3.807” 4.307” 4.556” LOCK MANDREL FISHING NECK ID 3.12” 3.12” 3.12” 4.00” RUNNING TOOL - ROTX 41182036800 41182038100 41182043100 41182045600 PULLING TOOL - ROTGR 40051336804 40051336804 40051336804 40051345600 EQUALIZING PRONGS RUNNING 4911826 4911640 4911640 4911805 PULLING 4911827 4911641 4911641 4911944 LENGTH 21.88” 21.88” 22.0” 23.99” MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( (PRODUCT CODE 41) : CHECK SET TOOL 4102183680 4102183810 4102184310 4102184560 * Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision) RELATED TOOLS The Plug requires ONE run to be set. Norm Alloy is suitable for H 2 S Service (NACE MR-01-2 75, Latest Revision) Plug Chokes are available in a variety of Materials, suitable for down-hole conditions.

Glossary AO Tubing End Locator Assembly AO Tubing End Locator Assembly The Rebco Tubing End Locator and Sampler is a combination depth-correlation and debris-sampling tool used to identify the lower end of the tubing string and simultaneously collect a representative debris sample from below or adjacent to the tubing shoe in a single wireline run. The tool body carries a spring-loaded trigger finger that is held in the retracted running position by a shear pin as the tool descends through the tubing bore. When the tool exits the bottom of the tubing string into the open casing or wellbore below, the trigger finger springs outward to the deployed horizontal position, expanding beyond the tubing OD. When the wireline operator picks up the string, the deployed finger catches on the lower face of the tubing shoe and provides a positive depth tag, confirming the depth at which the tubing ends. This gives the operator an absolute depth reference for all subsequent operations, correlated against known tubing tally records. After the depth tag is obtained, a single upward jar blow shears the brass pivot pin retaining the trigger, collapsing the finger and allowing the tool to re-enter the tubing string. The sampling chamber in the lower body retains a small quantity of material from the zone below the tubing end for analysis at the surface. Since the trigger operates on a one-shot shear pin mechanism, extreme care must be taken during the running-in phase to avoid shearing the pin prematurely, particularly when pulling the tool up into the lubricator before running. A Gauge Cutter should always be run prior to the Tubing End Locator to ensure the bore is clear and the tool will reach the tubing end without obstruction. Back to the Tool page PDF download AO Tubing End Locator Assembly AO Tubing End Locator Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary F Running Tool F Running Tool The Rebco F Running Tool is a simple, pin-through-ID running tool designed to set sub-surface tools with external fishing necks, secured by a transverse pin through the tool body ID. Unlike dog-engagement or collet-style running tools, the Type F physically pins through the ID of the sub-surface device's fishing neck, holding the device rigidly to the running tool body during the trip downhole. Once the device is set at the target depth, whether by downward jarring, collet engagement, or spring activation, the pin is sheared or the running tool is released by jarring, freeing the Type F for retrieval to the surface. The primary sub-surface tools set with the Type F are FO Collar Stops (Product Code 110) and SS Tubing Slip Stops (Product Code 164), both of which are commonly used as depth stops and anchors for BHP instruments and other downhole equipment. The Type F is available in nominal sizes from 1¼" through 4½", with each size paired to its corresponding Collar Stop and Slip Stop assembly numbers for straightforward tool matching. How to Order: Available in nominal sizes 1¼" through 4½". Assembly numbers: 41251 (1¼"–1½"), 41252 (2 1/16"–2½"), 41253 (3"–4"), 4125200, 4125250, 4125350, 4125450. Match to the Collar Stop or Slip Stop assembly being installed. Specify nominal size when ordering. Back to the Tool page PDF download F Running Tool F Running Tool Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

 Rebco Oil Tools, Inc. is an essential company in providing tools and equipment tailored to the dynamic needs of the Oil & Gas industry. We specialize in Sales, Engineering, and Manufacturing of Wireline Slickline Tools and Downhole Equipment. Global Presence Rebco Oil Tools, Inc. is an essential company in providing tools and equipment tailored to the dynamic needs of the Oil & Gas industry. We specialize in Sales, Engineering, and Manufacturing of Wireline Slickline Tools and Downhole Equipment, offering high-quality equipment and services to ensure that all your needs for successful wireline operations are met. With over 125 years of combined industry experience, Rebco is your trusted partner for success in the fast -paced world of Oil & Gas. Explore our website to learn more about our range of products and discover how we can help achieve peak performance in your operations. Rebco Values Our Values Excellence From product design to customer service, we strive for the highest standards of quality and performance, exceeding expectations at every opportunity. Collaboration We prioritize collaboration with our customers, working hand-in-hand to achieve common goals and deliver exceptional results. Innovation We embrace innovation and technology, to stay ahead in a rapidly evolving industry. Rebco is continuously improving machining and design principles but not compromising on the tooling or raw materials required to deliver high end equipment for the Oil & Gas industry. Environmental responsibility Our team is committed to minimizing our environmental impact and promoting sustainability. We strive to develop and implement environmentally friendly practices and technologies. Mission Rebco Oil Tools, Inc. is an essential company in providing tools and equipment tailored to the dynamic needs of the Oil and Gas industry. We specialize in Sales, Engineering, and Manufacturing of Wireline Slickline Tools and Downhole Equipment, offering high-quality equipment to ensure that all your needs for successful wireline operations are met.

Glossary ROTX & ROTXN Lock Mandrel Assembly with Safety Spring ROTX & ROTXN Lock Mandrel Assembly with Safety Spring Back to the Tool page PDF download ROTX & ROTXN Lock Mandrel Assembly with Safety Spring ROTX & ROTXN Lock Mandrel Assembly with Safety Spring Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.