L Kick-Over Tool Assembly
The Rebco L Series Kickover Tool is a wireline service tool designed for use with compatible running or pulling tools to install and retrieve 1-in. and 1½-in. outside-diameter side-pocket subsurface-control devices in compatible Camco KBUG and MMA series side-pocket mandrels. Its locating finger, spring-loaded centering arms, and locking dogs interact with the mandrel’s orienting profile to align the attached service tool with the selected side-pocket location. Once oriented, the kickover assembly positions the running or pulling tool for controlled installation or retrieval of the downhole device.
Product Code: 194
Applications
Selectively locate compatible 1-in. and 1½-in. OD side-pocket devices in compatible Camco KBUG and MMA series mandrels.
Position compatible running tools for installation of side-pocket subsurface-control devices.
Position compatible pulling tools for recovery of installed side-pocket devices.
Support wireline deployment, retrieval, and replacement of compatible downhole devices.
Key Benefits
Accurate tool alignment: The locating finger and spring-loaded centering arms help orient the tool string with the selected side-pocket mandrel.
Controlled kickover operation: Locking dogs help retain the assembly in the required position during the kickover sequence.
Flexible service use: The tool can be used with compatible running or pulling tools for installation and retrieval work.
Reduced intervention scope: Supports wireline servicing of compatible side-pocket devices without routine removal of the production tubing, subject to the completion design and operating procedure.
Notes
Kick-over | SPM | Latch | Running Tool | Pulling Tool | Pulling Spacer |
L | KBUG | BK-2 | JK-2 | 1 ¼ In. JDC 1.66 in. SM | - |
MMA | RA | JC-3 | 2” JDC & 2” SB | 4 3/4 in. |
Available in 2 - 2 ½”
Note: Confirm compatibility of the side-pocket mandrel, device size, running or pulling tool, and complete tool-string configuration before use.
Redress Kits Available: Rebco offers Major & Minor redress kits and replacement components for L Series Kickover Tools, including applicable locating, centering, and locking components. Provide the tool model and size to confirm the correct kit.
TECHNICAL DATA
NOMINAL SIZE | 2” - 2 1/2” | ||
ASSEMBLY NUMBER | 194082250 | ||
KICK OVER TOOL TYPE | L | ||
PIN THREAD CONNECTION | 15/16” – 10 | ||
FISHING NECK OD | 1.187” | ||
LENGTH | 29.94” | ||
MATERIAL | Alloy |
Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.