OK-5 Kick-Over Tool Assembly
The Rebco OK-5 Kickover Tool is a wireline service tool designed to install and retrieve compatible 1-in. OD side-pocket subsurface-control devices in appropriate Camco side-pocket mandrels. Used with a compatible running or pulling tool, the OK-5 uses spring-type centralizing elements to help maintain tool alignment within the tubing and support accurate orientation with the mandrel’s side pocket.
Product Code: 192
Applications
Installing compatible 1-in. OD gas-lift valves and other side-pocket subsurface-control devices.
Retrieving compatible 1-in. OD devices for replacement, inspection, or well servicing.
Positioning an attached running or pulling tool at the selected side-pocket mandrel.
Supporting wireline intervention in compatible mandrels equipped with the required orienting profile.
Key Benefits
Spring-assisted centralization: Spring-type centralizing elements help maintain the tool’s position in the tubing bore.
Controlled pocket alignment: The locating and kickover components assist in orienting the attached service tool with the side pocket.
Running and pulling capability: Supports both installation and retrieval when paired with the appropriate compatible service tool.
Wireline serviceability: Allows compatible side-pocket devices to be installed or recovered without routinely removing the tubing, subject to the completion and operating procedure.
Notes
Note: Confirm compatibility of the side-pocket mandrel profile, 1-in. OD device, tubing internal diameter, running or pulling tool, and complete tool-string configuration before use. The tool must be run with the appropriate compatible service tool and used in accordance with approved operating procedures
OK-5 Centralizer Note: Verify that the tubing internal diameter meets the applicable requirement for the spring-type centralizer. Inspect the centralizer springs and detent components before deployment and redress the tool as required using approved service procedures.
Redress Kits Available: Rebco offers Major & Minor redress kits and replacement components for OK-5 Kickover Tools, including applicable spring-centralizer and kickover components. Provide the tool size and configuration to confirm the correct kit.
TECHNICAL DATA
NOMINAL SIZE | 2” | 2 1/2” | 3” | 4 1/2” |
ASSEMBLY NUMBER | 192202452000 | 192202452500 | 192202453000 | 192202454500 |
MAXIMUM OD | 1.750” | 2.063” | 2.500” | 3.500” |
Tubing ID required for proper tool orientation | 1.945” | 2.437” | 2.921” | 3.958” |
PIN THREAD CONNECTION | 15/16” – 10 | 15/16” – 10 | 15/16” – 10 | 15/16” – 10 |
FISHING NECK OD | 1.375” | 1.375” | 1.375” | 1.375” |
LENGTH | 64 7/8” | 67.0” | 71 1/8” | 71 7/8” |
MATERIAL | Alloy | Alloy | Alloy | Alloy |
ACCESSORY: | ||||
Service Tool: Type ‘ST’ for Detent Spring | 5514151 | |||
Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.