Rebco ROTRR Plug Choke Assembly, when landed in ROTR Landing Nipple, of the same size, will plug off the nipple and tubing. The Plug Choke is capable of holding pressure differentials from above or below.

NOTE: Valve ROTRR Plug Choke Assembly is made up of ROTR Lock Mandrel (PRODUCT CODE 10, 17, and/or 18) and ROTR Equalizing Valve Sub-Assembly with a Cap (PRODUCT CODE 20).

Product Code: 20

DOWNLOAD DATASHEET

Valve ROTRR Plug Choke Assembly

TOOL APPLICATION

Applications

Plugging and pressure isolation from both above and below in ROTR Landing Nipples, across seal bore sizes of 1.710" through 4.813."
Single-run plug setting in wells where minimizing wireline trips is a priority
Well shut-in for repairs, zone isolation during testing, and pressure holding during completion operations
H2S service environments requiring Norm Alloy construction per NACE MR-01-75

Key Benefits

Single-run settings reduce wireline time and simplify operation compared to two-run Prong-type plug assemblies.
Bidirectional pressure-holding capability provides reliable tubing isolation regardless of the direction of the pressure differential.
Specific Equalizing Prong numbers assigned per seal bore size eliminate guesswork in field tool selection.
Check Set Tool (Product Code 41) available for all sizes, providing in-situ confirmation of correct plug seating.
Available in a variety of materials to suit downhole conditions.

Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

TECHNICAL DATA

NIPPLE SEAL BORE SIZE		1.710”	1.781”	1.875”	2.000”
ASSEMBLY NUMBER		20131317130	20131317830	20131318730	20131320030
ENGINEERING DATA
MAXIMUM OD (NO-GO)		1.705”	1.776”	1.870”	1.995”
LOCK MANDREL FISHING NECK ID		1.06”	1.38”	1.38”	1.38”
RUNNING TOOL - ROTR		41132017100	41132017800	41132018700	41132020000
PULLING TOOL - ROTGR		40051315000	40051317800	40051318700	40051318700
EQUALIZING PRONGS	RUNNING	49121324	4911793	4911793	4911793
EQUALIZING PRONGS	PULLING	49122037	49122078	49122078	49122078
LENGTH		20.5”	20.5”	20.5”	20.5”
MATERIAL *		Norm Alloy	Norm Alloy	Norm Alloy	Norm Alloy
ACCESSORY (PRODUCT CODE 41):
CHECK SET TOOL		4102131710	4102132000	4102132000	4102132000

NIPPLE SEAL BORE SIZE		2.125”	2.188”	2.313”	2.562”
ASSEMBLY NUMBER		20131321230	20131321830	20131323130	20131325630
ENGINEERING DATA
MAXIMUM OD (NO-GO)		2.120”	2.183”	2.308”	2.557”
LOCK MANDREL FISHING NECK ID		1.38”	1.81”	1.81”	1.81”
RUNNING TOOL - ROTR		41132021200	41132021800	41132023100	41132025600
PULLING TOOL - ROTGR		40051318700	40051321800	40051323100	40051323100
EQUALIZING PRONGS	RUNNING	4911793	49121325	49121325	4912505
EQUALIZING PRONGS	PULLING	49122078	49122081	49122081	49122044
LENGTH		20.5”	20.9”	20.9”	20.4”
MATERIAL *		Norm Alloy	Norm Alloy	Norm Alloy	Norm Alloy
ACCESSORY (PRODUCT CODE 41):
CHECK SET TOOL		4102132000	4102132180	4102132310	4102132560

NIPPLE SEAL BORE SIZE		2.750”	2.813”	3.437”	3.688”
ASSEMBLY NUMBER		20131327530	20131328130	20131334330	20131336830
ENGINEERING DATA
MAXIMUM OD (NO-GO)		2.745”	2.808”	3.432”	3.683”
LOCK MANDREL FISHING NECK ID		2.31”	2.31”	2.62”	3.12”
RUNNING TOOL - ROTR		41132027500	41132028100	41132034300	41132036800
PULLING TOOL - ROTGR		40051327500	40051327500	40051331202	40051336804
EQUALIZING PRONGS	RUNNING	49121119	49121119	4911882	4911826
EQUALIZING PRONGS	PULLING	49122085	49122085	4911881	4911827
LENGTH		20.77”	20.77”	21.62”	21.88”
MATERIAL *		Norm Alloy	Norm Alloy	Norm Alloy	Norm Alloy
ACCESSORY (PRODUCT CODE 41):
CHECK SET TOOL		4102133000	4102133000	4102133430	4102133680

NIPPLE SEAL BORE SIZE		3.813”	4.125”	4.313”	4.813”
ASSEMBLY NUMBER		20131338130	20131341230	20131343130	20131348130
ENGINEERING DATA
MAXIMUM OD (NO-GO)		3.808”	4.120”	4.308”	4.808”
LOCK MANDREL FISHING NECK ID		3.12”	3.12”	3.12”	4.00”
RUNNING TOOL - ROTR		41132038100	41132041200	41132043100	41132048100
PULLING TOOL - ROTGR		40051336804	40051336804	40051336804	40051345600
EQUALIZING PRONGS	RUNNING	4911762	49111012	4911640	4911943
EQUALIZING PRONGS	PULLING	4911763	49111148	4911641	4911944
LENGTH		22.3”	21.9”	21.9”	23.9”
MATERIAL *		Norm Alloy	Norm Alloy	Norm Alloy	Norm Alloy
ACCESSORY (PRODUCT CODE 41):
CHECK SET TOOL		4102133810	4102134120	4102134310	4102134810

* Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision)

RELATED TOOLS

The Plug requires ONE run to be set.

Product Code: 20

Plug Chokes are available in a variety of Materials, suitable for down-hole conditions.

Norm Alloy is suitable for H₂S Service (NACE MR-01-2 75, Latest Revision)

REBCO OIL TOOLS, INC.