Valve ROTRRN Plug Choke Assembly
Rebco ROTRRN Plug Choke Assembly, when landed in ROTRN Landing Nipple, of the same size, will plug off the nipple and tubing. The Plug Choke is capable of holding pressure differentials from above or below.
NOTE: Valve ROTRR Plug Choke Assembly is made up of ROTRN Lock Mandrel (PRODUCT CODE 10, 17, and/or 18) and ROTR Equalizing Valve Sub-Assembly with a Cap (PRODUCT CODE 20).
Product Code: 20
Applications
Plugging and pressure isolation from both above and below in ROTRN Landing Nipples, across seal bore sizes of 1.710" through 4.813."
Single-run plug setting with a positive No-Go depth stop, providing an additional level of positioning certainty compared to the selective ROTRR
Well shut-in, zone isolation, and pressure holding applications where the No-Go landing profile is already present in the completion string
H2S service environments requiring Norm Alloy construction
Key Benefits
The No-Go bottom shoulder provides a positive mechanical depth stop at the nipple, adding certainty to depth positioning that a selective plug cannot.
The single-run setting, identical to the ROTRR, maintains high operational efficiency.
Shares all Running Tools, Pulling Tools, and Equalizing Prong numbers with the ROTRR series for the same seal bore sizes, minimizing tool inventory requirements.
Check Set Tool (Product Code 41) is available for all sizes.
Available in a variety of materials to suit downhole conditions.
The Plug requires ONE run to be set.
Plug Chokes are available in a variety of Materials, suitable for down-hole conditions.
Norm Alloy is suitable for H2S Service (NACE MR-01-2 75, Latest Revision)
TECHNICAL DATA
NIPPLE SEAL BORE SIZE | 1.710” | 1.781” | 1.875” | 2.000” | |
ASSEMBLY NUMBER | 2013131017130 | 2013131017830 | 2013131018730 | 2013131020030 | |
ENGINEERING DATA | |||||
MAXIMUM OD (NO-GO) | 1.705” | 1.776” | 1.870” | 1.995” | |
LOCK MANDREL FISHING NECK ID | 1.06” | 1.38” | 1.38” | 1.38” | |
RUNNING TOOL - ROTR | 41132017100 | 41132017800 | 41132018700 | 41132020000 | |
PULLING TOOL - ROTGR | 40051315000 | 40051317800 | 40051318700 | 40051318700 | |
EQUALIZING PRONGS | RUNNING | 49121324 | 4911793 | 4911793 | 4911793 |
PULLING | 49122037 | 49122078 | 49122078 | 49122078 | |
LENGTH | 20.5” | 20.5” | 20.5” | 20.5” | |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | |
ACCESSORY (PRODUCT CODE 41): | |||||
CHECK SET TOOL | 4102131710 | 4102132000 | 4102132000 | 4102132000 | |
NIPPLE SEAL BORE SIZE | 2.125” | 2.188” | 2.313” | 2.562” | |
ASSEMBLY NUMBER | 2013131021230 | 2013131021830 | 2013131023130 | 2013131025630 | |
ENGINEERING DATA | |||||
MAXIMUM OD (NO-GO) | 2.120” | 2.183” | 2.308” | 2.557” | |
LOCK MANDREL FISHING NECK ID | 1.38” | 1.81” | 1.81” | 1.81” | |
RUNNING TOOL - ROTR | 41132021200 | 41132021800 | 41132023100 | 41132025600 | |
PULLING TOOL - ROTGR | 40051318700 | 40051321800 | 40051323100 | 40051323100 | |
EQUALIZING PRONGS | RUNNING | 4911793 | 49121325 | 49121325 | 4912505 |
PULLING | 49122078 | 49122081 | 49122081 | 49122044 | |
LENGTH | 20.5” | 20.9” | 20.9” | 20.4” | |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | |
ACCESSORY (PRODUCT CODE 41): | |||||
CHECK SET TOOL | 4102132000 | 4102132180 | 4102132310 | 4102132560 | |
NIPPLE SEAL BORE SIZE | 2.750” | 2.813” | 3.437” | 3.688” | |
ASSEMBLY NUMBER | 2013131027530 | 2013131028130 | 2013131034330 | 2013131036830 | |
ENGINEERING DATA | |||||
MAXIMUM OD (NO-GO) | 2.745” | 2.808” | 3.432” | 3.683” | |
LOCK MANDREL FISHING NECK ID | 2.31” | 2.31” | 2.62” | 3.12” | |
RUNNING TOOL - ROTR | 41132027500 | 41132028100 | 41132034300 | 41132036800 | |
PULLING TOOL - ROTGR | 40051327500 | 40051327500 | 40051331202 | 40051336804 | |
EQUALIZING PRONGS | RUNNING | 49121119 | 49121119 | 4911882 | 4911826 |
PULLING | 49122085 | 49122085 | 4911881 | 4911827 | |
LENGTH | 20.77” | 20.77” | 21.62” | 21.88” | |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | |
ACCESSORY (PRODUCT CODE 41): | |||||
CHECK SET TOOL | 4102133000 | 4102133000 | 4102133430 | 4102133680 | |
NIPPLE SEAL BORE SIZE | 3.813” | 4.125” | 4.313” | 4.813” | |
ASSEMBLY NUMBER | 2013131038130 | 2013131041230 | 2013131043130 | 2013131048130 | |
ENGINEERING DATA | |||||
MAXIMUM OD (NO-GO) | 3.808” | 4.120” | 4.308” | 4.808” | |
LOCK MANDREL FISHING NECK ID | 3.12” | 3.12” | 3.12” | 4.00” | |
RUNNING TOOL - ROTR | 41132038100 | 41132041200 | 41132043100 | 41132048100 | |
PULLING TOOL - ROTGR | 40051336804 | 40051336804 | 40051336804 | 40051345600 | |
EQUALIZING PRONGS | RUNNING | 4911762 | 49111012 | 4911640 | 4911943 |
PULLING | 4911763 | 49111148 | 4911641 | 4911944 | |
LENGTH | 22.3” | 21.9” | 21.9” | 23.9” | |
MATERIAL * | Norm Alloy | Norm Alloy | Norm Alloy | Norm Alloy | |
ACCESSORY (PRODUCT CODE 41): | |||||
CHECK SET TOOL | 4102133810 | 4102134120 | 4102134310 | 4102134810 | |
* Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision)
RELATED TOOLS
Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.