JO Unlatching Tool Assembly with J Head JO Unlatching Tool Assembly with J Head JO Unlatching Tool Assembly with J Head JO Unlatching Tool Assembly with J Head is used to set instruments into the well bore on top of pre-set Stop. To RUN: Attach the J Head to the Instrument, or Instrument Carrier (Bomb Well). The running tool's JAY slot allows the J Head to be unlatched by the weight of the tool string and left down hole. J Head's fishing neck is used to retrieve the instruments at later date with appropriate Pulling Tool. Product Code: 111 Read More DOWNLOAD DATASHEET REQUEST A QUOTE JO Unlatching Tool Assembly with J Head JO Unlatching Tool Assembly with J Head Click here TOOL APPLICATION Applications Deploying BHP recording instruments or Bomb Well assemblies onto pre-set depth stops using the latch-and-leave method Any survey operation where the instrument must be left downhole for a period before retrieval The standard instrument deployment method for all Collar Stop and Slip Stop-based BHP survey systems Key Benefits The J-slot latch-and-leave mechanism deposits the instrument at depth without jarring; no impact loads are transmitted to the instrument during deployment. Familiar and proven deployment system compatible with all Rebco Collar Stops and Slip Stops The J Head fishing neck enables future retrieval with a standard Pulling Tool. No special retrieval tool is required. Available in ¾"-16 (Amerada) and 15/16"-10 (Sucker Rod) J Head box thread connections Compatible with the BW Bomb Well Instrument Carrier for added instrument protection during deployment Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOMINAL SIZE 2” ASSEMBLY NUMBER For 2 3/8” - 3 1/2” Tubing Size 4107202000 4107202001 ENGINEERING DATA: RUNNING TOOL * (DET 1-6) MAXIMUM OD 1.50” 1.62” PIN THREAD CONNECTION 15/16” - 10 15/16” - 10 FISHING NECK 1.375” 1.375” LENGTH 15.19” 15.19” MATERIAL Alloy Alloy Running Tool : See Section III - JU (Jay) Unlatching Running Tool for selection of Sizes ENGINEERING DATA: RUNNING TOOL * (DET 1-6) FISHING NECK 1.187” 1.375” MAXIMUM OD 1.75” 1.75” LENGTH 9.12” 9.12” BOX THREAD CONNECTION 3/4” - 16 3/4” - 16 ‘J’ Heads with 15/16” - 10 Box Thread are available. RELATED TOOLS Running Tool : See Section III , Page III-16 for selection of Sizes J Heads with 15/16" - 10 Box Thread are available.

Modified PORN & POXN Test Tool Plug Assembly Modified PORN & POXN Test Tool Plug Assembly Modified PORN & POXN Test Tool Plug Assembly Modified Test Tool Plug Assembly holds pressure from above only. For this reason, the 'V' Packing on the Lock Mandrel and the Prong face upwards. The Lock Mandrel is run with or without Keys into NON SELECTIVE Nipple (Bottom No-Go). Product Code: 14 Read More DOWNLOAD DATASHEET REQUEST A QUOTE Modified PORN & POXN Test Tool Plug Assembly Modified PORN & POXN Test Tool Plug Assembly Click here TOOL APPLICATION Applications High-integrity tubing pressure testing in bottom No-Go Landing Nipples, where a locked, two-component plug is preferred over a No-Go-seated one-piece tool Wells with sand or scale production where the extra-long Prong is required to prevent the assembly from being buried and stuck after testing Applications where the Lock Mandrel must be independently verified as set (using a Check Set Tool) before the Prong is run, confirming the seal seat is properly established before applying test pressure Key Benefits The two-component Lock Mandrel and Prong design provides a mechanically locked pressure seal, not reliant solely on the No-Go shoulder like the ROTN or check valves. Extra-long Prong option keeps the assembly base clear of sand and scales, significantly reducing the risk of post-test stuck-tool retrievals. Flexible deployment options: run with keys (two trips, mandrel first, then prong) or without keys (single trip with preassembled plug) Check Set Tool compatibility to confirm the proper lock mandrel setting before the Prong is run, adding a verification step before applying test pressure. Prongs available in specified lengths to suit the sand/scale environment; specify when ordering Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA RELATED TOOLS A. Running with Keys: - Use appropriate Running Tool. - Use Check Set Tool to ensure proper setting of the Lock Mandrel. - Run the Prong into the Lock Mandrel with appropriate SB Pulling Tool size. The Prong will seat itself, in the No-Go Sub attached to the Lock Mandrel, stopping by the bottom No-Go on the Prong B. Running without the Keys: - The position of the Fishing Neck and Expander Sleeve, (Parts of the Lock Mandrel) can be open or closed. For this reason the Prong can be inserted into the Plug and the whole assembly run on appropriate SB Pulling Tool size. C. Pulling the Plug Assembly without the Keys: - When pulling the Plug Assembly with appropriate SB Pulling Tool size, it is not uncommon that the Plug (Lock Mandrel with the Prong) is recovered together. If there is any sand or scale to hold the Plug, the Prong will be recovered first, and the Lock Mandrel is retrieved with appropriate ROTGS Pulling Tool size. D. Pulling the Plug Assembly with the Keys: - Use appropriate SB Pulling Tool size to pull the Prong first. - Use appropriate ROTGS Pulling Tool size to pull the Lock Mandrel. NOTE: The advantage of the Modified Test Plug (with extra-long Prong) use is that it minimizes the risk of being stuck beneath sand or scale after pressure testing the Tubing. When ordering: Specify the Type and Size of the Lock Mandrel and desired Length of the Prong.

AO & AD Knuckle Joint Assembly AO & AD Knuckle Joint Assembly AO & AD Knuckle Joint Assembly Rebco Knuckle Joint has a ball type swivel joint to provide flexibility in the Wireline Tool String. Normally, it is used on the end of the Wireline Tool String to allow for angular movement between the tool string and the Running or Pulling Tool. Product Code: 103 Read More DOWNLOAD DATASHEET REQUEST A QUOTE AO & AD Knuckle Joint Assembly AO & AD Knuckle Joint Assembly Click here TOOL APPLICATION Applications Placed immediately above the working tool in deviated or corkscrew tubing Added between the stem and jars when a significant deviation causes the string to bind Gas lift kickover tool operations: if the kickover tool does not have a built-in knuckle joint, one must be placed immediately above it. Used at every connection in the string for highly deviated wells Key Benefits Provides up to 15° of angular flexibility to prevent tool string hang-up in deviated tubing Double fishing neck option for added recovery security in the event of downhole separation Available in ⅜"–2½" OD to cover all standard tool string sizes Threaded and RQLS/RQLD quick-lock connections available Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOM SIZE ASSEMBLY PART NUMBER ENGINEERING DATA MAX OD CONNECTION FISHING NECK LENGTH Type ‘AO’ - Threaded Connection 3/8” 10300200375 .38” 1/4” - 20 NONE 4.0” 1/2” 10300200500 .50” 3/8” - 16 NONE 3.81” 3/4” 10300200750 .75” 1/2” - 13 .687” 6.19” 7/8” 10300200875 .88” .750” 1” 10300201000 1.00” 5/8” - 11 7.23” 1 1/4” 10300201250 1.25” 15/16” - 10 1.187” 10.12” 1 1/2” 10300201500 1.50” 1.375” 1 3/4” 10300201750 1.75” 1 1/16” - 10 1.750” 11.12” 1 7/8” 10300201870 1.88” 2 1/8” 10300202120 2.12” 11.0” 2 1/2” 10300202500 2.50” 2.313” 11.44” 10300202501 1 9/16” - 10 11.84” Type ‘AD’ - Threaded Connection 1 1/2” 10300031500 1.50” ‘RQLD’ 1.375” 15.94” 1 3/4” 10300031750 1.75” 1.750” 10.12” 1 7/8” 10300031870 1.88” 2 1/8” 10300032120 2.12” 15.94” 2 1/2” 10300032500 2.50” 2.313” 16.44” RELATED TOOLS Rebco offers Knuckle Joints with Threaded and QLS Connections, and Double Fishing Neck. Rebco AS Knuckle Joint with 'RQLS' connection is available, contact sales@rebcooiltools.com for more information about the AS .

SO & SD Spring Jar Assembly SO & SD Spring Jar Assembly SO & SD Spring Jar Assembly Rebco Spring Jar is a telescoping up-stroke Jar installed below the Stem. The impact force can be predetermined at surface by the Operator with the Calibration Unit shown below. Rebco offers Spring Jars with Threaded or QLS Connections. Product Code: 102 Read More DOWNLOAD DATASHEET REQUEST A QUOTE SO & SD Spring Jar Assembly SO & SD Spring Jar Assembly Click here TOOL APPLICATION Applications Upstroke jarring in gas wells where hydraulic jars cannot be used due to gas infiltration risk Heavy-duty fishing operations requiring controlled, high-intensity upstroke impact Wells where temperature extremes may affect hydraulic jar fluid properties Any application requiring an adjustable, pre-set impact force. Key Benefits Release point and impact force are preset on the surface using the included calibration unit. No seals or hydraulic fluid, unaffected by downhole temperature or gas presence Delivers greater upward impact than comparable hydraulic jars in most conditions Fluid bypass slots allow free access of wellbore fluids through the jar body. Calibration unit and release wrench included — must be ordered by tool size. Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOM SIZE ASSEMBLY PART NUMBER ENGINEERING DATA MAX OD CONNECTION FISHING NECK LENGTH Type ‘SO’ Spring Jar - Threaded Connection 1 1/2” 10214201500 1.50” 15/16” - 10 1.375” 35.68” 1 3/4” 10214201750 1.75” 1 1/16” - 10 1.750” 37.55” 1 7/8” 10214201870 1.88” 2 1/8” 10214202120 2.12” 2 1/2” 10214202500 2.50” 2.313” 38.65” 10214202501 1 9/16” - 10 38.90” Type ‘SD’ Spring Jar - QLS Connection 1 1/2” 10214031500 1.50” ‘RQLD’ 1.375” 42.38” 1 3/4” 10214031750 1.75” 1.750” 43.40” 1 7/8” 10214031870 1.88” 2 1/8” 10214032120 2.12” 2 1/2” 10214032500 2.50” 2.313” 44.00” RELATED TOOLS ACCESSORIES: Shown Tools are necessary to set the Jars for desired Impact. Tools are priced separately. Order by PART NUMBER shown.

ROTP Running Tool Assembly ROTP Running Tool Assembly ROTP Running Tool Assembly The Rebco ROTP Running Tool is specifically designed for use with sub-surface devices featuring removable prong assemblies. Its extended internal recess accommodates the prong fishing neck, which projects above the main tool fishing neck, ensuring proper alignment and secure running of the device into the wellbore. Product Code: 41 Read More DOWNLOAD DATASHEET REQUEST A QUOTE ROTP Running Tool Assembly ROTP Running Tool Assembly Click here TOOL APPLICATION Applications Running and setting sub-surface devices equipped with removable prong assemblies and projecting prong fishing necks Applications where the prong must be fully enclosed and protected during the trip downhole Compatible with various prong-equipped lock mandrels and flow control devices Key Benefits The extended internal recess fully houses the prong fishing neck, protecting it from damage during deployment. Available with optional Prong Box Thread for prong assemblies requiring a threaded lower connection Running neck ID customizable to match the specific sub-surface device fishing neck configuration Alloy construction across all sizes for durability under wireline jarring loads Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOMINAL SIZE ASSEMBLY PART NUMBER ENGINEERING DATA LENGTH THREAD CONNECTION FISHING NECK OD MAX OD RUNNING NECK ID * PIN PRONG 1 3/16” 41113 6.19” 5/8” - 11 None 1.000” 1.31” .413” 1 1/2” 41117 6.00” 15/16” - 10 None 1.187” 1.42” 1.010” 2” 41111 8.00” None 1.375” 1.69” 1.163” 2 1/2” 41112 7.50” None 1.750” 2.00” 1.574” 3” 41116 5.12” 1 1/16” - 10 None 2.313’ 2.50” 1.950” RELATED TOOLS Running Neck ID is determined by the Type of Sub-Surface Tool used. If ROTP Running Tool listed in the box is not suitable, please Specify Fishing Neck Size or Tool Type when ordering. Type ROTP Running Tool can be ordered with Prong Box Thread; please specify.

CD Sampler (Drive Down) Bailer Assembly CD Sampler (Drive Down) Bailer Assembly CD Sampler (Drive Down) Bailer Assembly The Rebco CD Sampler (Drive Down) Bailer is engineered to collect samples of debris that have settled or bridged within the wellbore. By examining the recovered material, the operator can assess downhole conditions and determine the appropriate next steps in the wireline operation. Product Code: 168 Read More DOWNLOAD DATASHEET REQUEST A QUOTE CD Sampler (Drive Down) Bailer Assembly CD Sampler (Drive Down) Bailer Assembly Click here TOOL APPLICATION Applications Taking representative debris samples at the obstruction site before full-scale bailing operations Physically penetrating and extracting columns of compacted debris that cannot be lifted by pump-action bailers. Identifying debris composition and particle size to select the correct remediation tool and method Light debris clearing passes in wells where larger bailers cannot be deployed due to tubing size restrictions. Key Benefits Dual-purpose: 2 ft sample tube for diagnosis, 5 ft drive-down tube for full debris extraction The angled mule shoe design assists in cutting into compacted debris beds. Three interchangeable bottom shoe configurations: ball, flapper, and junk-catcher, with optional mule shoe bottoms Alternative tube lengths available on request for non-standard accumulation depths Available in 1½" – 4" OD to cover all standard tubing sizes Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOM SIZE OD ASSEMBLY NUMBER LENGTH CONNECTION Type ‘CD’ Type ‘CF’ BALL BOTTOM FLAPPER BOTTOM PIN THREAD FISHING NECK 3/4” 16802030750 16802250750 28 7/8” 1/2” - 13 .687” 1 1/4” 16802031251 16802251251 18 3/8” 15/16” - 10 1.187” 16802031250 16802251250 24” 1 1/2” 16802031500 16802251500 1.375” 16802031501 16802251501 48.44” 1 5/8” 16802031620 16802251620 36” 16802031621 16802251621 60” 1 3/4” 16802031750 16802251750 36” 16802031751 16802251751 60” 2” 16802032000 16802252000 36” 2 1/8” 16802032120 16802252120 2 1/4” 16802032250 16802252250 16802032251 16802252251 60” 2 1/2” 16802032500 16802252500 36” 1 1/16” - 10 1.750” 16802032505 16802252505 60” 3” 16802033000 16802253000 36” 16802033005 16802253005 60” RELATED TOOLS Two configurations are available: CD - equipped with a ball bottom shoe CF - equipped with a flapper bottom shoe Below are standard sizes and lengths; however, custom configurations can be supplied to meet specific operational requirements.

ROTXN Landing Nipple ROTXN Landing Nipple ROTXN Landing Nipple The Rebco ROTXN Landing Nipple is a bottom no-go profile designed to provide a positive landing and sealing location for compatible wireline-deployed flow-control equipment. It may be used as a standalone nipple or installed as the lowest profile in a completion string containing X or other compatible landing nipples above it. Product Code: 11 Read More DOWNLOAD DATASHEET REQUEST A QUOTE ROTXN Landing Nipple ROTXN Landing Nipple Click here TOOL APPLICATION Applications Provides a positive landing point for compatible bottom no-go flow-control devices. Supports gauge hangers used for downhole pressure and temperature monitoring. Provides a fixed locator for compatible straddle systems and related completion assemblies. Supports plug installation and well-isolation operations under pressure. Key Benefits Positive depth location: The bottom no-go shoulder stops compatible tools at a defined depth for repeatable placement. Bottom-of-string use: Well suited for single-nipple installations or as the deepest nipple in a string containing selective X nipples above. Shared packing-bore sizing: Uses the corresponding packing-bore diameter for the selected tubing size and weight. Completion flexibility: Can be paired with X selective nipples to combine fixed bottom landing with selective placement at higher depths. Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA Tubing OD Size NIPPLE - ‘ROTX’ NIPPLE - ‘ROTXN’ Seal Bore Seal Bore No-Go ID Inches mm Inches mm Inches mm Inches mm Inches mm 1.660 42.16 1.250 31.75 1.250 31.75 1.250 31.75 1.135 28.83 1.900 48.26 1.500 38.1 1.500 38.1 1.500 38.1 1.448 36.78 2 1/16 52.37 1.625 41.28 1.625 41.28 1.625 41.28 1.536 39.01 2 3/8 60.33 1.875 47.63 1.875 47.63 1.875 47.63 1.791 45.49 2 7/8 73.02 2.313 58.75 2.312 58.75 2.312 58.75 2.205 56.01 3 1/2 88.9 2.750 69.85 2.750 69.85 2.750 69.85 2.635 66.93 2.813 71.45 2.813 71.45 2.813 71.45 2.666 67.72 2.875 73.03 2.875 73.03 2.875 73.03 2.760 70.10 4 101.60 3.313 84.15 3.313 84.15 3.313 84.15 3.135 79.63 4 1/2 114.30 3.813 96.85 3.813 96.85 3.813 96.85 3.725 94.62 5 127.0 4.313 109.55 4.313 109.55 4.313 109.55 3.987 101.27 5 1/2 139.70 4.562 115.87 4.562 115.87 4.562 115.87 4.455 113.16 4.813 122.25 4.813 122.25 4.813 122.25 4.725 120.02 7 177.80 5.963 151.46 5.963 151.46 5.963 151.46 5.770 146.56 7 5/8 193.68 6.125 155.58 6.125 155.58 6.125 155.58 5.937 150.80 RELATED TOOLS ROTX Landing Nipple VIEW ROTXN Lock Mandrel Assembly VIEW Valve ROTXXN Plug Choke Assembly VIEW Equalizing Prong ROTPXXN Plug Choke Assembly VIEW

ROTX Equalizing Valve Sub-Assembly ROTX Equalizing Valve Sub-Assembly ROTX Equalizing Valve Sub-Assembly Rebco ROTX Equalizing Sub-Assembly is to be used with ROTX & ROTXN Lock Mandrels. These Sub-Assemblies are designed to allow pressure differentials to be equalized across the Lock Mandrels and Flow controls before attempting to retrieve them from respective Landing Nipples. Product Code: 20 Read More DOWNLOAD DATASHEET REQUEST A QUOTE ROTX Equalizing Valve Sub-Assembly ROTX Equalizing Valve Sub-Assembly Click here TOOL APPLICATION Applications Equalizing pressure across ROTX and ROTXN Lock Mandrels in their respective Landing Nipples, across nipple seal bores of 1.500" through 4.562", before retrieval operations Small-bore completions beginning at 1.500" seal bore, matching the ROTX lock mandrel's coverage down to 1.250" nominal H2S environments requiring Norm Alloy construction per NACE MR-01-75 Applications where the End Cap or without-Cap (suffix 1) configuration is required for specific assembly needs Key Benefits One-to-one pairing of assembly numbers between the ROTX Equalizing Sub and the corresponding ROTX or ROTXN Lock Mandrel eliminates selection ambiguity and ensures field accuracy. Covers the full ROTX and ROTXN lock mandrel size range, from 1.500" through 4.562" nipple seal bore. Available with or without an end cap for assembly flexibility. Norm Alloy construction for H2S service; a variety of materials available. Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOMINAL SIZE 1.500” 1.625” 1.875” 2.313” 2.750” ASSEMBLY NUMBER 20182015030 20182016230 20182018730 20182023130 20182027530 ENGINEERING DATA MAXIMUM OD – No-Go 1.495” 1.620” 1.870” 2.307” 2.745” BOX THREAD CONNECTION 1 1/8” - 16 1 1/8” - 16 1 3/8” - 14 1 3/4” - 12 2 1/4” - 12 SLB PIN THREAD CONNECTION 1 1/8” - 16 1 1/8” - 16 1 3/8” - 14 1 3/4” - 12 2 1/4” - 12 SLB LENGTH 8.12” 8.12” 8.12” 8.25” 8.02” MATERIAL* Norm Alloy* Norm Alloy* Norm Alloy* Norm Alloy* Norm Alloy* To be used with Lock Mandrel ROTX 10182015030 10182016230 10182018730 10182023130 10182027530 ROTXN 10181015030 10181016230 10181018730 101810230 10181027530 Sub-Assembly without Cap 20182015031 20182016231 20182018731 20182023131 20182027531 NOMINAL SIZE 2.813” 2.875” 3.313” 3.813” 4.562” ASSEMBLY NUMBER 20182028130 20182028730 20182033130 20182038130 20182045630 ENGINEERING DATA MAXIMUM OD – No-Go 2.808” 2.870” 3.307” 3.807” 4.556” BOX THREAD CONNECTION 2 1/4” - 12 SLB 2 1/4” - 12 SLB 2 3/4” - 12 SLB 3 1/16” - 12 SLB 4” - 12 SLB PIN THREAD CONNECTION 2 1/4” - 12 SLB 2 1/4” - 12 SLB 2 3/4” - 12 SLB 3 1/16” - 12 SLB 4” - 12 SLB LENGTH 8.02” 8.02” 8.02” 8.63” 10.42” MATERIAL* Norm Alloy* Norm Alloy* Norm Alloy* Norm Alloy* Norm Alloy* To be used with Lock Mandrel ROTX 10182028130 10182028730 1818203310 18182038130 18182045630 ROTXN 10181028130 10181028730 1818103310 18181038130 18181045630 Sub-Assembly without Cap 20182028131 20182028731 20182033131 20182038131 20182045631 Norm Alloy (NACE MR-01-75, 1980 Rev.) RELATED TOOLS Norm Alloy (NACE MR-01-75,1980 Rev.) Note: ROTX Equalizing Sub-Assemblies are available in variety of Materials. Lock Mandrels - see PRODUCT CODE 10, 17 and 18

ROTRZG-1 Plug Choke with Removable Mandrel (BOTTOM No-Go) ROTRZG-1 Plug Choke with Removable Mandrel (BOTTOM No-Go) ROTRZG-1 Plug Choke with Removable Mandrel (BOTTOM No-Go) Rebco ROTRZG-1 Plug Choke (By-pass Blanking Plug) with Removable Mandrel is a positive blank-off device designed to seal off pressure from above and below. The Plug Assembly is a Bottom No-Go device to be set in BR Landing Nipple . NOTE: ROTRZG-1 Plug Choke (By-pass Blanking Plug) with Removable Mandrel uses different type of Lock (Dog). Product code: 21 Read More DOWNLOAD DATASHEET REQUEST A QUOTE ROTRZG-1 Plug Choke with Removable Mandrel (BOTTOM No-Go) ROTRZG-1 Plug Choke with Removable Mandrel (BOTTOM No-Go) Click here TOOL APPLICATION Applications Positive blank-off and bidirectional pressure sealing in BR Landing Nipples, using a Bottom No-Go mechanical stop, in nominal tubing sizes from 2" through 3-1/2" Completions where the nipple profile in place is a BR (Bottom No-Go) rather than a BF (Top No-Go), requiring the Bottom No-Go plug configuration Two-run setting operations with a removable mandrel for flexible deployment and retrieval Key Benefits Bottom No-Go orientation directly complements the Top No-Go ROTFWG, providing the correct plug type for each nipple profile type in the completion string. The removable mandrel design allows the mandrel body to run and pull independently of the sealing element. A consistent tool family, including the ROTFWG and ROTFSG-2, reduces field inventory requirements. Redress Kit available for all sizes. Available in a variety of materials. Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOMINAL SIZE 4 1/2" SEAL BORE SIZE 3.688” 3.750” 3.813” ASSEMBLY NUMBER 2113220513680 2113220513750 2113220513810 ENGINEERING DATA OD - (No-Go) 3.678” 3.740” 3.802” FISHING NECK OD 3.125” 3.125” 3.125” RUNNING TOOL Note *1 4 1/2” ROTC-1 41022014500 41022014500 41022014500 4 1/2” ROTBG 4101054500 4101054500 4101054500 PULLING TOOL Note *2 SHEAR DOWN SB 4014014000 4014014000 4014014000 JDC (a)(b) 400703024000 (a) 400703024000 (b) 400703024000 SHEAR UP ROTRB 4013014000 4013014000 4013014000 JUC (a)(b) 400716024000 (a) 400716024000 (b) 400716024000 PULLING PROBE 4 1/2" ROTB 1950185300 1950185300 1950185300 LENGTH 20.3” 20.3” 20.3” MATERIAL Alloy Alloy Alloy Reference: REDRESS KIT - Only ‘V’ Packing (Qty - 6 only) included as part of the REDRESS KIT Note: *1 – either / or Running Tools can be Used Note: *2 CAUTION: (a) - Pulling Tool ‘ROTJDC’ and ‘ROTJUC’ will not pass thru 3.688” Seal Bore. (b) - Pulling Tool ‘ROTJDC’ and ‘ROTJUC’ will not pass thru 3.750” Seal Bore, but may be used for retrieving if there is no restriction in the tubing above the accessory smaller than the next larger Seal Bore. RELATED TOOLS Plug Chokes are available in a variety of Materials, suitable for down-hole conditions. Reference: REDRESS KIT - Only 'V' Packing (Qty - 6 only) included as part of the REDRESS KIT See PRODUCT CODE 10, Lock Mandrels: Type S-2,1 , W-2,1 & Z-2,1 for more details

SB Pulling Tool (Short Reach) Assembly SB Pulling Tool (Short Reach) Assembly SB Pulling Tool (Short Reach) Assembly Rebco SB Pulling Tool is designed to run and retrieve sub surface equipment with External fishing neck. The tool can be released by jarring down. Product Code: 40 Read More DOWNLOAD DATASHEET REQUEST A QUOTE SB Pulling Tool (Short Reach) Assembly SB Pulling Tool (Short Reach) Assembly Click here TOOL APPLICATION Applications Retrieving FO Collar Stops, SS Tubing Slip Stops, and similar short-fishing-neck sub-surface devices Routine BHP survey retrieval operations, where a short-reach shear-down tool is the standard field choice Any external fishing neck retrieval application where the SB's dog geometry is matched to the device's fishing neck profile Key Benefits Short-reach core suits the majority of routine wireline retrieval operations on collar stops, slip stops, and similar devices. Core replacement extends tool service life and allows reach adjustment without replacing the full assembly. Shear-down release provides positive tool-string retrieval even when the device is stuck. Available from 1" to 4" nominal, the broadest size range of any single pulling tool type in Section IV Full accessory set (Pinning Tool, Releasing Tool, Core Wrench, Core Nut Wrench) available for every size Alloy construction for durability under routine wireline jarring loads Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOMINAL SIZE 1” 1 1/4” 1 1/2” 1 1/2” 2” ASSEMBLY NUMBER 4014011000 4014011250 4014011500 4014011501 4014012000 ENGINEERING DATA: MAXIMUM OD .927 1.25” 1.43” 1.43” 1.77” PIN THREAD CONNECTION 5/8” - 11 5/8” - 11 15/16” - 10 15/16” - 10 15/16” - 10 FISHING NECK OD .687” 1.000” 1.187” 1.187” 1.375” BOTTOM THREAD (PRONG) 1/4” - 20 3/8” - 16 3/8” - 16 3/8” - 16 1/2” - 13 WILL ENGAGE FISHING NECK OD .687” 1.000” 1.187” 1.187” 1.375” REACH 1.00” 1.22” .69” 1.3” 1.28” LENGTH 10.3” 14.5” 11.88” 11.88” 15.89” MATERIAL Alloy Alloy Alloy Alloy Alloy ACCESSORIES: PINNING TOOL ASS’Y 16711002 16711003 16711003 16711003 16711004 RELEASING TOOL 1670011 167004 167004 167004 167003 CORE WRENCH 167026 167026 167023 167023 167024 CORE NUT WRENCH 167013 167013 167012 167012 167011 NOMINAL SIZE 2 1/2” 3” 3” 3 1/2” 4” ASSEMBLY NUMBER 4014012500 4014013001 4014013000 4014013500 4014014000 ENGINEERING DATA: MAXIMUM OD 2.18” 2.73” 2.84” 3.115” 3.670” PIN THREAD CONNECTION 15/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 FISHING NECK OD 1.375” 2.313” 2.313” 2.313” 2.313” BOTTOM THREAD (PRONG) 1/2” - 13 5/8” - 11 5/8” - 11 5/8” - 11 1 1/4” - 12 WILL ENGAGE FISHING NECK OD 1.750” 2.313” 2.313” 2.750” 3.125” REACH 1.28” 1.5” 1.38” 1.75” 1.50” LENGTH 16.36” 17.5” 17.5” 18.0” 18.0” MATERIAL Alloy Alloy Alloy Alloy Alloy ACCESSORIES: PINNING TOOL ASS’Y 16711004 16711005 16711005 16711003 16711006 RELEASING TOOL 167006 167007 167007 167008 167009 CORE WRENCH 167024 167025 167025 167023 167026 CORE NUT WRENCH 167011 167011 167011 167011 167011 RELATED TOOLS

RB Pulling Tool (Short Reach) Assembly RB Pulling Tool (Short Reach) Assembly RB Pulling Tool (Short Reach) Assembly R Pulling Tool series are Shear Up design for external Fishing Neck. Rebco offers a wide range of sizes within this group of Pulling Tools. These Tools are offered with three basic reaches to retrieve the Sub-Surface devices with external Fishing Neck. Product Code: 40 Read More DOWNLOAD DATASHEET REQUEST A QUOTE RB Pulling Tool (Short Reach) Assembly RB Pulling Tool (Short Reach) Assembly Click here TOOL APPLICATION Applications Retrieving lock mandrels, instrument hangers, and other R-Series fishing neck profile devices using short reach Standard retrieval operations on ROTR, ROTRN, ROTX, ROTXN, and similar lock mandrel families Applications where shear-up release is required for external fishing neck retrieval Key Benefits Dog geometry matched to the R-Series fishing neck profile found on lock mandrels and instrument hangers. Short-reach core for fishing necks at shallow depth in the device assembly Shear-up release provides a safe means of retrieving the tool string under all conditions. Core replacement only for reach changes within the same nominal size, no full tool replacement required Alloy construction with full accessory suite (Pinning Tool, Releasing Tool, Core Wrench, Core Nut Wrench) Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOMINAL SIZE 1” 1 3/16” 1 1/4” 1 1/2” 1 1/2” ASSEMBLY NUMBER 4013011000 4013011180 4013011250 4013011501 4013011500 ENGINEERING DATA: MAXIMUM OD .97” 1.19” 1.22” 1.48” 1.43” PIN THREAD CONNECTION 5/8” - 11 5/8” - 11 5/8” - 11 15/16” - 10 15/16” - 10 FISHING NECK OD .750” .875” 1.000” 1.187” 1.187” BOTTOM THREAD (PRONG) 10/24” 10/24” 3/8” - 16 3/8” - 16 3/8” - 16 WILL ENGAGE FISHING NECK OD .750” .875” 1.000” 1.187” 1.187” REACH 1.36” 1.30” 1.31” 1.05” 1.26” LENGTH 9.77” 12.8” 13.30” 12.2” 12.2” MATERIAL Alloy Alloy Alloy Alloy Alloy ACCESSORIES: PINNING TOOL ASS’Y 16711001 16711001 16711003 16711003 16711003 RELEASING TOOL 167002 167003 167004 167004 167004 CORE WRENCH 167021 167022 167023 167023 167023 NOMINAL SIZE 2” 2 1/2” 3” 3 1/2” 4” ASSEMBLY NUMBER 4013012000 4013012500 4013013000 4013013500 4013014000 ENGINEERING DATA: MAXIMUM OD 1.77” 2.18” 2.74” 3.11” 3.67” PIN THREAD CONNECTION 15/16” - 10 15/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 FISHING NECK OD 1.375” 1.375” 2.313” 2.313” 2.313” BOTTOM THREAD (PRONG) 1/2” - 13 1/2” - 13 5/8” - 11 5/8” - 11 1 1/4” - 12 WILL ENGAGE FISHING NECK OD 1.375” 1.750” 2.313” 2.750” 3.125” REACH 1.29” 1.28” 1.38” 1.38” 1.56” LENGTH 16.40” 16.36” 16.06” 15.87” 18.0” MATERIAL Alloy Alloy Alloy Alloy Alloy ACCESSORIES: PINNING TOOL ASS’Y 16711004 16711004 16711005 16711005 16711006 RELEASING TOOL 167005 167006 167007 167009 167008 CORE WRENCH 167024 167024 167025 167025 167026 RELATED TOOLS Three types of Tools with reach designation: RB - Short Reach RS - Medium reach RJ - Long Reach

L-2D Kick-Over Tool Assembly L-2D Kick-Over Tool Assembly L-2D Kick-Over Tool Assembly The Rebco L-2D Series Kickover Tool is a wireline service tool designed to install and retrieve compatible 1-in. and 1½-in. outside-diameter side-pocket subsurface-control devices in compatible Camco KBM and MM series side-pocket mandrels. Used with the appropriate running or pulling tool, the L-2D assembly uses locating and locking components to orient the tool string at the selected mandrel pocket. Spring-loaded centering arms help maintain alignment during the kickover sequence, positioning the attached service tool for controlled device installation or retrieval. Product Code: 194 Read More DOWNLOAD DATASHEET REQUEST A QUOTE L-2D Kick-Over Tool Assembly L-2D Kick-Over Tool Assembly Click here TOOL APPLICATION Applications Install compatible 1-in. and 1½-in. OD side-pocket subsurface-control devices in approved side-pocket mandrels. Retrieve installed retrievable devices for replacement, inspection, or corrective well servicing. Position compatible running tools for deploying approved gas-lift valves, dummy valves, and other side-pocket flow-control devices. Position compatible pulling tools for removal of installed devices from the selected mandrel pocket. Key Benefits Accurate pocket positioning: The locating finger and spring-loaded centering arms help align the attached service tool with the selected side-pocket location. One tool for running and pulling: When configured with the appropriate compatible running or pulling tool, the L-2D supports both device installation and retrieval. Controlled kickover action: Locking dogs help hold the barrel assembly in the intended position while the service tool is moved into alignment with the mandrel pocket. Efficient device replacement: Supports wireline replacement of compatible retrievable devices, limiting the need for tubing-pulling work when the well configuration and operating procedure permit. Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale. TECHNICAL DATA NOMINAL SIZE 2” - 2 1/2” 3” ASSEMBLY NUMBER 194082032250 194082033000 KICK OVER TOOL TYPE L-2D L-2D PIN THREAD CONNECTION 15/16” – 10 15/16” – 10 FISHING NECK OD 1.187” 1.187” LENGTH 21” 21” MATERIAL Alloy Alloy RELATED TOOLS Running Tools for Gas Lift VIEW JDS Pulling Tool (Medium Reach) Assembly VIEW L Kick-Over Tool Assembly VIEW Note Disclaimer: The L-2D Kickover Tool must be used with the appropriate compatible running or pulling tool. Device, mandrel, spacer-bar, and tool-string compatibility must be confirmed for the intended application. Available in 2 - 2 ½” to 3” Kick-over SPM Latch Running Tool Pulling Tool Pulling Spacer L-2D MMG RK RK-1 1 ⅝ in. JDS + Core extension 1 ½ in. SB 4 ¾ in. Redress Kits Available: Rebco offers Major & Minor redress kits and replacement components for L-2D Series Kickover Tools, including applicable locating, centering, locking, and kickover components. Provide the tool model and size to confirm the correct kit.