Valve ROTRR Plug Choke Assembly Plug Assemblies Valve ROTRR Plug Choke Assembly Valve ROTRR Plug Choke Assembly Rebco ROTRR Plug Choke Assembly, when landed in ROTR Landing Nipple , of the same size, will plug off the nipple and tubing. The Plug Choke is capable of holding pressure differentials from above or below. NOTE: Valve ROTRR Plug Choke Assembly is made up of ROTR Lock Mandrel (PRODUCT CODE 10, 17, and/or 18) and ROTR Equalizing Valve Sub-Assembly with a Cap (PRODUCT CODE 20) . Product Code: 20 REQUEST A QUOTE DOWNLOAD DATASHEET Valve ROTRR Plug Choke Assembly Valve ROTRR Plug Choke Assembly Click here Applications Plugging and pressure isolation from both above and below in ROTR Landing Nipples, across seal bore sizes of 1.710" through 4.813." Single-run plug setting in wells where minimizing wireline trips is a priority Well shut-in for repairs, zone isolation during testing, and pressure holding during completion operations H2S service environments requiring Norm Alloy construction per NACE MR-01-75 Key Benefits Single-run settings reduce wireline time and simplify operation compared to two-run Prong-type plug assemblies. Bidirectional pressure-holding capability provides reliable tubing isolation regardless of the direction of the pressure differential. Specific Equalizing Prong numbers assigned per seal bore size eliminate guesswork in field tool selection. Check Set Tool (Product Code 41) available for all sizes, providing in-situ confirmation of correct plug seating. Available in a variety of materials to suit downhole conditions. The Plug requires ONE run to be set. Product Code: 20 Plug Chokes are available in a variety of Materials, suitable for down-hole conditions. Norm Alloy is suitable for H 2 S Service (NACE MR-01-2 75, Latest Revision) TECHNICAL DATA NIPPLE SEAL BORE SIZE 1.710” 1.781” 1.875” 2.000” ASSEMBLY NUMBER 20131317130 20131317830 20131318730 20131320030 ENGINEERING DATA MAXIMUM OD (NO-GO) 1.705” 1.776” 1.870” 1.995” LOCK MANDREL FISHING NECK ID 1.06” 1.38” 1.38” 1.38” RUNNING TOOL - ROTR 41132017100 41132017800 41132018700 41132020000 PULLING TOOL - ROTGR 40051315000 40051317800 40051318700 40051318700 EQUALIZING PRONGS RUNNING 49121324 4911793 4911793 4911793 PULLING 49122037 49122078 49122078 49122078 LENGTH 20.5” 20.5” 20.5” 20.5” MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102131710 4102132000 4102132000 4102132000 NIPPLE SEAL BORE SIZE 2.125” 2.188” 2.313” 2.562” ASSEMBLY NUMBER 20131321230 20131321830 20131323130 20131325630 ENGINEERING DATA MAXIMUM OD (NO-GO) 2.120” 2.183” 2.308” 2.557” LOCK MANDREL FISHING NECK ID 1.38” 1.81” 1.81” 1.81” RUNNING TOOL - ROTR 41132021200 41132021800 41132023100 41132025600 PULLING TOOL - ROTGR 40051318700 40051321800 40051323100 40051323100 EQUALIZING PRONGS RUNNING 4911793 49121325 49121325 4912505 PULLING 49122078 49122081 49122081 49122044 LENGTH 20.5” 20.9” 20.9” 20.4” MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102132000 4102132180 4102132310 4102132560 NIPPLE SEAL BORE SIZE 2.750” 2.813” 3.437” 3.688” ASSEMBLY NUMBER 20131327530 20131328130 20131334330 20131336830 ENGINEERING DATA MAXIMUM OD (NO-GO) 2.745” 2.808” 3.432” 3.683” LOCK MANDREL FISHING NECK ID 2.31” 2.31” 2.62” 3.12” RUNNING TOOL - ROTR 41132027500 41132028100 41132034300 41132036800 PULLING TOOL - ROTGR 40051327500 40051327500 40051331202 40051336804 EQUALIZING PRONGS RUNNING 49121119 49121119 4911882 4911826 PULLING 49122085 49122085 4911881 4911827 LENGTH 20.77” 20.77” 21.62” 21.88” MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102133000 4102133000 4102133430 4102133680 NIPPLE SEAL BORE SIZE 3.813” 4.125” 4.313” 4.813” ASSEMBLY NUMBER 20131338130 20131341230 20131343130 20131348130 ENGINEERING DATA MAXIMUM OD (NO-GO) 3.808” 4.120” 4.308” 4.808” LOCK MANDREL FISHING NECK ID 3.12” 3.12” 3.12” 4.00” RUNNING TOOL - ROTR 41132038100 41132041200 41132043100 41132048100 PULLING TOOL - ROTGR 40051336804 40051336804 40051336804 40051345600 EQUALIZING PRONGS RUNNING 4911762 49111012 4911640 4911943 PULLING 4911763 49111148 4911641 4911944 LENGTH 22.3” 21.9” 21.9” 23.9” MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102133810 4102134120 4102134310 4102134810 * Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision) RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

AO Rope Sockets Tool String AO Rope Sockets AO Rope Sockets Rebco AO Rope Sockets are recommended to be used with .066" to .105" diameter Single Strand Wire. The Wireline should be passed through the Body, Spring and Support, before being wrapped tightly around the groove of the Disc. Product Code: 100 REQUEST A QUOTE DOWNLOAD DATASHEET AO Rope Sockets AO Rope Sockets Click here Applications Primary wireline-to-tool string connection for single-strand slickline operations Used as an emergency release point when positioned mid-string with a pulling tool Suitable for well pressures and conditions requiring a controlled wire parting point Key Benefits Deliberate weak-point design protects the wireline uphole during stuck-string situations. Available in a wide range of ODs from ⅜" to 2½" to suit all tubing sizes Alloy steel construction with special material options for sour or corrosive well environments Compatible with Rebco & industry standard threaded connections Note: 3/8" and 1/2" AO Rope Sockets are offered with Set Screws Only TECHNICAL DATA NOMINAL SIZE 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1 1/4” ASSEMBLY NUMBER 10000200370 10000200500 10000200620 10000200750 10000200870 10000201000 10000201250 ENGINEERING DATA: FISHING NECK OD .375 .500” .500” .687” .750” 1.000” 1.187” BOX THREAD CONNECTION 1/4” - 20 3/8” - 16 3/8” - 16 1/2” - 13 5/8” - 11 5/8” - 11 15/16” - 10 MAXIMUM OD .38” .50” .63” .75” .88” 1.00” 1.25” LENGTH 4.06” 4.50” 4.50” 3.12” 3.12” 6.88” 5.56” MATERIAL Alloy Alloy Alloy Alloy Alloy Alloy Alloy NOMINAL SIZE 1 1/2” 1 3/4” 1 7/8” 2” 2 1/8” 2 1/4” 2 1/2” ASSEMBLY NUMBER 10000201500 10000201750 10000201870 10000202000 10000202120 10000202250 10000202500 ENGINEERING DATA: FISHING NECK OD 1.375” 1.750” 1.750” 1.750” 1.750” 1.750” 2.313” BOX THREAD CONNECTION 15/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 9/16” - 10 MAXIMUM OD 1.38” 1.75” 1.88” 2.00” 2.12” 2.25” 2.50” LENGTH 5.56” 5.56” 5.56” 5.56” 5.56” 5.56” 6.50” MATERIAL Alloy Alloy Alloy Alloy Alloy Alloy Alloy RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

Valve ROTXX Plug Choke Assembly Plug Assemblies Valve ROTXX Plug Choke Assembly Valve ROTXX Plug Choke Assembly Rebco ROTXX Plug Choke Assembly, when landed in Type ROTX Landing Nipple , of the same size, will plug off the nipple and tubing. The Plug Choke is capable of holding pressure differentials from above or below. NOTE: Valve ROTXX Plug Choke Assembly is made up of ROTX Lock Mandrel (PRODUCT CODE 10, 17, and/or 18) and ROTX Equalizing Valve Sub-Assembly with a Cap (PRODUCT CODE 20) . Product Code: 20 REQUEST A QUOTE DOWNLOAD DATASHEET Valve ROTXX Plug Choke Assembly Valve ROTXX Plug Choke Assembly Click here Applications Plugging and pressure isolation from both above and below in ROTX Landing Nipples, across seal bore sizes of 1.500" through 4.562." Small-bore completions beginning at 1.500" seal bore, where the ROTX nipple profile is the completion standard Single-run plug setting for efficient wireline operations H2S service environments requiring Norm Alloy construction Key Benefits The smallest available seal bore coverage in the valve-type plug choke family, starting at 1.500", addresses velocity strings and small-diameter production tubing not served by the ROTRR series. Single-run setting reduces the number of wireline trips required. ROTX-specific Running and Pulling Tools, Equalizing Prongs, and Check Set Tools are fully specified per size in the engineering data tables. Bidirectional pressure holding provides complete tubing isolation. Available in a variety of materials to suit downhole conditions. The Plug requires ONE run to be set. Norm Alloy is suitable for H 2 S Service (NACE MR-01-2 75, Latest Revision) Plug Chokes are available in a variety of Materials, suitable for down-hole conditions. TECHNICAL DATA NIPPLE SEAL BORE SIZE 1.500” 1.625” 1.875” 2.313” ASSEMBLY NUMBER 20181815030 20181816230 20181818730 20181823130 ENGINEERING DATA MAXIMUM OD (NO-GO) 1.495” 1.620” 1.870” 2.307” LOCK MANDREL FISHING NECK ID 1.06” 1.06” 1.38” 1.81” RUNNING TOOL - ROTX 41182015000 41182016200 41182018700 41182023100 PULLING TOOL - ROTGR 40051315000 40051315000 40051318700 40051323100 EQUALIZING PRONGS RUNNING 49121324 4912496 4912505 4911793 PULLING 49122037 49122035 49122044 49122078 LENGTH 22.75” 22.75” 20.28” 20.75” MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY (PRODUCT CODE 41) : CHECK SET TOOL 4102181500 4102181500 4102181870 4102182310 NIPPLE SEAL BORE SIZE 2.750” 2.813” 2.875” 3.313” ASSEMBLY NUMBER 20181827530 20181828130 20181828730 20181833130 ENGINEERING DATA MAXIMUM OD (NO-GO) 2.745” 2.808” 2.870” 3.307” LOCK MANDREL FISHING NECK ID 2.31” 2.31” 2.31” 2.62” RUNNING TOOL - ROTX 41182027500 41182028100 41182028700 41182033100 PULLING TOOL - ROTGR 40051327500 40051327500 40051327500 40051331202 EQUALIZING PRONGS RUNNING 4912599 4912599 4912599 4911762 PULLING 49122043 49122043 49122043 4911763 LENGTH 20.77” 20.77” 20.77” 23.8” MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( (PRODUCT CODE 41) : CHECK SET TOOL 4102183000 4102183000 4102183000 4102183310 NIPPLE SEAL BORE SIZE 3.688” 3.813” 4.313” 4.562” ASSEMBLY NUMBER 20181836830 20181838130 20181843130 20181845630 ENGINEERING DATA MAXIMUM OD (NO-GO) 3.682” 3.807” 4.307” 4.556” LOCK MANDREL FISHING NECK ID 3.12” 3.12” 3.12” 4.00” RUNNING TOOL - ROTX 41182036800 41182038100 41182043100 41182045600 PULLING TOOL - ROTGR 40051336804 40051336804 40051336804 40051345600 EQUALIZING PRONGS RUNNING 4911826 4911640 4911640 4911805 PULLING 4911827 4911641 4911641 4911944 LENGTH 21.88” 21.88” 22.0” 23.99” MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( (PRODUCT CODE 41) : CHECK SET TOOL 4102183680 4102183810 4102184310 4102184560 * Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision) RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

Anchor Type Stops Assemblies for Tubing Perforator Service Tools Anchor Type Stops Assemblies for Tubing Perforator Anchor Type Stops Assemblies for Tubing Perforator Rebco CS and/or TS Anchor Stops are designed to screw directly into the base of the Tubing Perforator, and as a unit, to be set at desired depth. Product Code: 62 CS Collar Stop Anchor Assemblies TS Slip Stop Anchor Assemblies REQUEST A QUOTE DOWNLOAD DATASHEET Anchor Type Stops Assemblies for Tubing Perforator Anchor Type Stops Assemblies for Tubing Perforator Click here Applications Providing a positive reactive anchor for the ROTAO Tubing Perforator during punch activation Eliminating the need for a separate anchor-setting wireline run before perforating CS: anchoring at collar recesses for the highest reliability in collar-coincident perforation depths TS: anchoring at any smooth-bore depth when collar locations do not align with the target perforation interval Multi-perforation programs where the perforator and anchor are retrieved, repositioned, and reset at each target depth Key Benefits Made up directly to the Tubing Perforator bottom connection, perforator and anchor run, set, and retrieve as a single unit Eliminates the need for a separate anchor-setting run, reducing the total number of wireline trips and rig time per perforation. CS provides the most reliable, collar-seated anchor available for perforating operations. TS provides depth flexibility for perforating at any tubing interval, independent of collar spacing. Both types are available in 2" – 4½" nominal sizes to match all standard Rebco ROTAO Perforator sizes. Spare parts recommendation: 3 each of Punch and Guide Bushing per job CS Collar Stop Anchor Assemblies Rebco CS Collar Stop Anchor is used in the Tubing as a Stop; screwed directly to the bottom of the Tubing Perforator, to be set and pulled as a unit. Special Collet OD for 3 1/2" Collar Stop Anchor that will pass through 2.750" Nipple is available. _ TS Slip Stop Anchor Assemblies Rebco TS Slip Stop Anchor is used in the Tubing as a Stop; screwed directly to the bottom of the Tubing Perforator, to be set and pulled as a unit. TECHNICAL DATA Type ‘CS’ Collar Stop Anchor Assemblies: NOMINAL SIZE 2” (2 3/8”) 2 1/2” (2 7/8”) 3 1/2” 4 1/2” ASSEMBLY NUMBER 6202142000 6202142500 6202143500 6202144500 ENGINEERING DATA: MAXIMUM OD 1.75” 2.19” 2.75” 3.75” PIN THREAD CONNECTION 5/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 FISHING NECK OD 1.375” 1.750” 2.313” 2.313” LENGTH 10.72” 11.31” 11.81” 11.61” MATERIAL Alloy Alloy Alloy Alloy Type ‘TS’ Slip Stop Anchor Assemblies: NOMINAL SIZE 2” (2 3/8”) 2 1/2” (2 7/8”) 3 1/2” 4 1/2” ASSEMBLY NUMBER 6215142000 6215142500 6215143500 6215144500 ENGINEERING DATA: MAXIMUM OD - SET IN PLACE 1.998” 2.492” 3.05” 3.75” PIN THREAD CONNECTION 15/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 FISHING NECK OD 1.375” 1.750” 2.313” 2.313” LENGTH - SET IN PLACE 14.25” 14.15” 16.05” 17.8” MATERIAL Alloy Alloy Alloy Alloy RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

XNH & XOH Instrument Hanger Assembly 'BHP' Instrument Hangers XNH & XOH Instrument Hanger Assembly XNH & XOH Instrument Hanger Assembly Rebco XNH Instrument Hanger Assembly is used to land and lock geophysical instruments in ROTXN Landing Nipples respectively, to allow recording of reservoir data. Rebco XOH Instrument Hanger Assembly is used to land and lock geophysical instruments in ROTX Landing Nipples respectively, to allow recording of reservoir data. Product Code: 33 REQUEST A QUOTE DOWNLOAD DATASHEET XNH & XOH Instrument Hanger Assembly XNH & XOH Instrument Hanger Assembly Click here Applications Deploying BHP recording instruments into ROTXN nipples (XNH) or ROTX nipples (XOH) Small-bore completions requiring instrument hanger capability from 1.900" nominal and upward Sour service environments requiring NACE-compliant construction Key Benefits Covers the widest nominal size range of any Rebco instrument hanger from 1.900" through 5½." The Protector Sleeve design eliminates the Seal Stack and O-Ring Seal, simplifying assembly and reducing consumable usage. ROTX Running Tool and ROTGR Pulling Tool provide a complete, dedicated run-and-retrieve pair NACE MR-01-75 alloy construction standard across all sizes Lock mandrel parts are available separately for field repair. The Instrument Hanger Assembly consists of Lock Mandrel Assembly (DET 1), Protector Sleeve (DET 3) and a Hanger Sub (DET 2); offered with Amerada (3/4" - 16) Box connection and/or Sucker Rod (15/16" - 10) Box connection. NOTE: Lock Mandrel does not require Seal Stack or 'O' Ring Seal; instead, a Protector Sleeve is supplied to minimize the damage to the Packing Mandrel. A list of Assembly Sizes shown are not limited to the availability of other Sizes required, or Materials to suit well conditions. Please specify when ordering. RUNNING AND PULLING TOOLS REQUIRED: Select by Nominal Size - Seal Bore Size Running Tool: ROTX , Section III, Product Code 41 Pulling Tool: ROTGR , Section IV, Product Code 40 TECHNICAL DATA NOM SIZE SEAL BORE SIZE ASSEMBLY NUMBER LOCK MANDREL SUB-ASS’Y PROTECTOR SLEEVE HANGER SUB BOX THREAD BOX THREAD w/3/4” - 16 w/15/16” - 10 3/4” - 16 15/16” - 10 Type ‘XNH’ Instrument Hanger 1.900” 1.500” 3318100615030 3318100615031 10181015030 33001 33201815030 33201815031 2 1/16” 1.625” 3318100616230 3318100616231 10181016230 33002 33201816230 33201816231 2 3/8” 1.875” 3318100618730 3318100618731 10181018730 33005 33201818730 33201818731 2 7/8” 2.313” 3318100623130 3318100623131 10181023130 33009 33201823130 33201823131 3 1/2” 2.750” 3318100627530 3318100627531 10181027530 330012 33201827530 33201827531 2.813” 3318100628130 3318100628131 10181028130 330012 33201828130 33201828131 2.875” 3318100628730 3318100628731 10181028730 330012 33201828730 33201828731 4” 4 1/2" 3.313” 3318100633130 3318100633131 18181033130 330013 33201833130 33201833131 3.813” 3318100638130 3318100638131 18181038130 330015 33201838130 33201838131 5” 5 1/2" 4.313” 3318100643130 3318100643131 18181043130 330017 33201843130 33201843131 4.562” 3318100645630 3318100645631 18181045630 330018 33201845630 33201845631 Type ‘XOH’ Instrument Hanger 1.900” 1.500” 3318200615030 3318200615031 10182015030 33001 33201815030 33201815031 2 1/16” 1.625” 3318200616230 3318200616231 10182016230 33002 33201816230 33201816231 2 3/8” 1.875” 3318200618730 3318200618731 10182018730 33005 33201818730 33201818731 2 7/8” 2.313” 3318200623130 3318200623131 10182023130 33009 33201823130 33201823131 3 1/2” 2.750” 3318200627530 3318200627531 10182027530 330012 33201827530 33201827531 2.813” 3318200628130 3318200628131 10182028130 330012 33201828130 33201828131 2.875” 3318200628730 3318200628731 10182028730 330012 33201828730 33201828731 4” 4 1/2" 3.313” 3318200633130 3318200633131 18182033130 330013 33201833130 33201833131 3.813” 3318200638130 3318200638131 18182038130 330015 33201838130 33201838131 5” 5 1/2" 4.313” 3318200643130 3318200643131 18182043130 330017 33201843130 33201843131 4.562” 3318200645630 3318200645631 18182045630 330018 33201845630 33201845631 RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

HO Swivel Joint Assembly Tool String HO Swivel Joint Assembly HO Swivel Joint Assembly Rebco HO Swivel Joint was designed to minimize the twisting of the Wireline when running the Tools down hole. HO Swivel Joint's have a Threaded Connection. Product Code: 104 REQUEST A QUOTE DOWNLOAD DATASHEET HO Swivel Joint Assembly HO Swivel Joint Assembly Click here Applications Placed directly below the rope socket to protect the wireline from torsional overload Essential when using wedge/teardrop-style rope sockets that do not allow wire rotation Used whenever extended jarring operations risk unscrewing downhole threaded connections Recommended for stranded and braided line deployments where torsional loading is elevated Key Benefits Internal bearing shaft allows free rotation under load, protecting the wireline from twist damage. Prevents tool string components from unscrewing during extended downhole jarring Available in all standard tool string ODs from 1" to 2½." Alloy steel construction with special well-conditioned material options available Must be ordered by wire size for correct fit Alloy Material is used to manufacture Rebco Swivel Joints Materials suitable for specific well conditions are available. Must be ordered by Wire Size in use. Product Code: 104 TECHNICAL DATA NOMINAL SIZE 1” 1 1/4” 1 1/2” 1 3/4” 1 7/8” ASSEMBLY NUMBER 10406201000 10406201250 10406201500 10406201750 10406201870 ENGINEERING DATA: FISHING NECK OD .750” 1.187” 1.375” 1.750” 1.750” PIN-BOX THREAD CONNECTION 5/8” - 11 15/16” - 10 15/16” - 10 1 1/16” - 10 1 1/16” - 10 MAXIMUM OD 1.00” 1.25” 1.50” 1.75” 1.88” LENGTH 6.46” 10.88” 10.88” 10.85” 10.85” MATERIAL Alloy Alloy Alloy Alloy Alloy ACCESSORIES WRENCH for BALL CONNECTOR 1670011 1670010 1670010 1670010 1670010 NOMINAL SIZE 2” 2 1/8” 2 1/2” 2 1/2” ASSEMBLY NUMBER 10406202000 10406202120 10406202500 10406202501 ENGINEERING DATA: FISHING NECK OD 1.750” 1.750” 2.313” 2.313” PIN-BOX THREAD CONNECTION 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 9/16” - 10 MAXIMUM OD 2.00” 2.12” 2.50” 2.50” LENGTH 10.85” 10.85” 11.25” 11.25” MATERIAL Alloy Alloy Alloy Alloy ACCESSORIES WRENCH for BALL CONNECTOR 1670010 1670010 1670010 1670010 RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

ED Roller Stem (Weight Bar) Tool String ED Roller Stem (Weight Bar) ED Roller Stem (Weight Bar) Rebco ED Roller Stems are with integral QLS (Quick Lock System) - Rebco Type RQLD * Product Code: 101 REQUEST A QUOTE DOWNLOAD DATASHEET ED Roller Stem (Weight Bar) ED Roller Stem (Weight Bar) Click here Applications All Type EO applications requiring rapid tool string assembly Multi-run deviated well operations. Key Benefits All roller friction-reduction benefits with quick-lock convenience. Custom roller material and OD available on request * Material, OD of Rollers, No. of Rollers and Configuration can be changed to suit. Please specify TECHNICAL DATA ASSEMBLY PART NUMBER NOMINAL SIZE (OD) ENGINEERING DATA LENGTH 'QLS' CONNECTIONS FISHING NECK NO * ROLLERS ROLLER OD * 10104031502 1 1/2” 24” ‘RQLD’ 1.375” 2 1.75” 10104031503 36” 3 10104031505 60” 4 10104031752 1 3/4” 24” 1.750” 2 2.20” 10104031753 36” 3 10104031755 60” 4 10104031872 1 7/8” 24” 2 10104031873 36” 3 10104031875 60” 4 10104032122 2 1/8” 24” 2 2.75” 10104032123 36” 3 10104032125 60” 4 10104032502 2 1/2” 24” 2.313” 2 3.25” 10104032503 36” 3 10104032505 60” 4 RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

JB Junk Basket - Valve Catcher Service Tools JB Junk Basket - Valve Catcher JB Junk Basket - Valve Catcher The Rebco JB Junk Basket - Valve Catcher is engineered to be set in a No-Go type Landing Nipple, positioned directly below the Side Pocket Mandrel. It is primarily used in gas lift operations during the changeout of gas lift or dummy valves. If a valve is accidentally dropped, the Catcher securely traps it, preventing damage to the equipment below. Product Code: 163 REQUEST A QUOTE DOWNLOAD DATASHEET JB Junk Basket - Valve Catcher JB Junk Basket - Valve Catcher Click here Applications Recovering loose metallic debris, shear pin fragments, split ring pieces, and broken tool components from the wellbore Cleaning the top of a subsurface device before a pulling run to prevent debris from jamming the pulling tool Post-failure debris recovery to identify the cause of a downhole tool failure from the pieces recovered. Key Benefits Internal catch chamber securely retains collected debris throughout the retrieval trip to the surface. The flow-through body design allows wellbore fluid circulation without flushing captured debris back out. Recovered debris can be identified and analyzed to support failure investigation. Available in all standard tool string sizes and threaded connections The Junk Basket can also be installed above flow control devices to catch debris or foreign material that may fall around the system, offering added protection to the completion assembly. Product Code: 163 Norm Alloy is suitable for H 2 S Service (NACE MR-01-2 75, Latest Revision) Junk Baskets are available in other Sizes and Models not shown. Please inquire. TECHNICAL DATA NOMINAL SIZE 2 3/8” 2 7/8” 2 7/8” 3 1/2” 4 1/2” ASSEMBLY NUMBER 163070118730 163070122530 163070123130 163070127530 163070138130 NIPPLE SEAL BORE SIZE 1.875” 2.250” 2.313” 2.750’ 3.813” ENGINEERING DATA: MAXIMUM OD 1.87” 2.20” 2.30” 2.73” 3.75” ID of the BASKET 1.44’ 1.75” 1.87” 2.25’ 2.99” FISHING NECK ID 1.38” 1.81’ 1.81’ 2.31’ 3.12” LENGTH 36.0” 36.0” 36.0” 36.0” 36.0” MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORIES: PRODUCT CODE 40 RUNNING/PULLING TOOL - ROTGS 40051418700 40051423100 40051423100 40051427500 40051436804 RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

ROTTS Collar Lock Mandrel Sub-Assembly Lock Mandrels ROTTS Collar Lock Mandrel Sub-Assembly ROTTS Collar Lock Mandrel Sub-Assembly Rebco ROTTS Collar Lock Mandrel Sub-Assembly is designed to be set in API Tubing Collars. Type ROTTS Collar Lock Mandrel is basically the same as ROTS-2 Lock Mandrel Sub- Assembly (Product 10); with modified Keys to be able to locate in the Tubing Collars. Product Code: 10 REQUEST A QUOTE DOWNLOAD DATASHEET ROTTS Collar Lock Mandrel Sub-Assembly ROTTS Collar Lock Mandrel Sub-Assembly Click here Applications Selective, bidirectional locking in API tubing collars in wells without Landing Nipples, across nominal tubing sizes of 2 3/8", 2 7/8", and 3 1/2" Any application where the ROTS-2 function is required, but a machined nipple is not present in the completion string. Retrofit applications in wells where selective flow control capabilities need to be added without a nipple installation workover Key Benefits The Modified Key design allows the familiar ROTS-2 bidirectional locking function to be applied to standard API tubing collars, greatly expanding the range of wells in which selective locking is achievable. Bidirectional Dogs provide positive resistance to upward and downward movement, unlike single-direction lock designs. Functionally consistent with the ROTS-2, meaning field personnel familiar with that tool will require minimal additional training. Available across three standard nominal tubing sizes. TECHNICAL DATA RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

OK-6 Kick-Over Tool Assembly Gas Lift - Kick Over Tools OK-6 Kick-Over Tool Assembly OK-6 Kick-Over Tool Assembly The Rebco OK-6 Kickover Tool is a wireline service tool designed to install and retrieve compatible 1-in. OD side-pocket subsurface-control devices in appropriate Camco side-pocket mandrels. Used with a compatible running or pulling tool, the OK-6 uses a solid centralizer sleeve to guide and stabilize the tool assembly within the tubing while the locating and kickover components position the attached service tool at the selected side pocket. Product Code: 192 REQUEST A QUOTE DOWNLOAD DATASHEET OK-6 Kick-Over Tool Assembly OK-6 Kick-Over Tool Assembly Click here Applications Installing compatible 1-in. OD gas-lift valves and other side-pocket subsurface-control devices. Retrieving compatible 1-in. OD devices for replacement, inspection, or well servicing. Positioning an attached running or pulling tool at the selected side-pocket mandrel. Supporting wireline intervention in compatible mandrels equipped with the required orienting profile. Key Benefits Sleeve-type centralization: The solid centralizer sleeve provides an alternative method of guiding and stabilizing the tool in the tubing. Controlled pocket alignment: Locating and kickover components assist in orienting the attached service tool with the side pocket. Running and pulling capability: Supports both installation and retrieval when paired with the appropriate compatible service tool. Alternative tool configuration: Provides a centralizer arrangement different from the spring-based OK-5 design for applications where the sleeve configuration is specified. Notes Kick-over SPM Latch Running Tool Pulling Tool Pulling Spacer OK-1 KBMG KBUG BK-2 JK-2 1 ¼ in. JDS 1.66 in. SM - OK-6 OK-6 Centralizer Note: Verify that the tubing internal diameter and selected tool size are suitable for the sleeve-type centralizer configuration. Inspect the centralizer sleeve, locating finger, kick springs, and arm assembly before deployment in accordance with approved service procedures. Redress Kits Available: Rebco offers Major & Minor redress kits and replacement components for OK-6 Kickover Tools, including applicable sleeve-centralizer and kickover components. Provide the tool size and configuration to confirm the correct kit. TECHNICAL DATA NOMINAL SIZE 2 7/8” 3” 4 ½” ASSEMBLY NUMBER 192202462500 192202463000 192202464500 MAXIMUM OD 2.223” 2.500” 3.500” Tubing ID required for proper tool orientation 2.437” 2.921” 3.958” PIN THREAD CONNECTION 15/16” – 10 15/16” – 10 15/16” – 10 FISHING NECK OD 1.375” 1.375” 1.375” LENGTH 67.0” 71.125” 71.87” MATERIAL Alloy Alloy Alloy ACCESSORY: Service Tool: Type ‘ST’ for Detent Spring 5514151 RELATED TOOLS AO & AD Knuckle Joint Assembly VIEW Running Tools for Gas Lift VIEW JDS Pulling Tool (Medium Reach) Assembly VIEW OK-5 Kick-Over Tool Assembly VIEW Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.