ROTE & ROTK (Bottom No-Go) Lock Mandrel Sub-Assembly Lock Mandrels ROTE & ROTK (Bottom No-Go) Lock Mandrel Sub-Assembly ROTE & ROTK (Bottom No-Go) Lock Mandrel Sub-Assembly Rebco ROTE & ROTK are Bottom No-Go, Lock Mandrel Sub-Assembly to be set into BR Landing nipple . ROTK Lock is basically a Type ROTE Lock Sub-Assembly less the Packing Unit and Packing Mandrel. Product Code: 10 REQUEST A QUOTE DOWNLOAD DATASHEET ROTE & ROTK (Bottom No-Go) Lock Mandrel Sub-Assembly ROTE & ROTK (Bottom No-Go) Lock Mandrel Sub-Assembly Click here Applications Locking wireline retrievable downhole equipment in BR Landing Nipples in 3 1/2" and 4 1/2" nominal tubing, where a Bottom No-Go reference is required High-volume completions requiring large internal bore flow areas in the larger bore size range Applications needing a full tubing pack-off using the ROTE with its integrated Packing Unit Applications requiring only positional locking without a pack-off, using the ROTK Key Benefits Bottom No-Go orientation in the larger bore range complements the Top No-Go ROTF and ROTM series, providing the correct lock type for each nipple profile in the completion string. Internal Fishing Neck design maximizes the bore flow area through the lock for high-volume production. Shares running tools, pulling tools, and prongs with the ROTF and ROTM family, maintaining a consistent and streamlined tool inventory for large-bore completions. Available in a variety of materials, including Norm Alloy certified for H2S service. Type ROTF , ROTM , ROTE , and ROTK Lock Mandrel Sub-Assemblies are devices used to position and secure Wireline retrievable downhole equipment into pre-set Tubing Nipples with appropriate profiles. The Locks provide a large flow areas through internal Fishing Neck. The Latch with Collet type locking fingers prevent upward movement, while No-Go shoulders prevent downward movement. Rebco ROTE and ROTK Lock Mandrel Sub-Assemblies are available in variety of Materials for down-hole conditions. TECHNICAL DATA RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

RMF Pulling Tool Assembly Pulling Tools RMF Pulling Tool Assembly RMF Pulling Tool Assembly Rebco RMF Pulling Tool is a Multi-Functional Tool design, sometimes called a 'Universal Tool'. The Tool is used to run and retrieve Wireline set devices with external Fishing Necks. Product Code: 40 REQUEST A QUOTE DOWNLOAD DATASHEET RMF Pulling Tool Assembly RMF Pulling Tool Assembly Click here Applications Retrieving external fishing neck devices in wells where the preferred release direction is uncertain Operations where both upward and downward jar release attempts may be required on the same run Reducing the risk of being unable to release from a stuck device due to commitment to a single release direction Key Benefits Only the pulling tool in the Rebco lineup can shear its release pin in either the upward or downward direction. Eliminates the need to trip out of the hole to switch between shear-up and shear-down tools when the initial release attempt fails Provides maximum operational flexibility in unpredictable or challenging wellbore conditions The Tool can be run in the Shear-Up to release or Shear-Down to release mode. Single Core can be adjusted to the desired Reach: Short, Medium or Long Reach. TECHNICAL DATA NOMINAL SIZE 2” 2 1/2” 3” ASSEMBLY NUMBER 4016202000 4016202500 4016203000 ENGINEERING DATA: MAXIMUM OD 1.86” 2.25” 2.80” PIN THREAD CONNECTION 15/16” - 10 15/16” - 10 1 1/16” - 10 FISHING NECK OD 1.375” 1.375” 1.750” BOTTOM THREAD (PRONG) 1/2” - 13 1/2” - 13 5/8” - 11 WILL ENGAGE FISHING NECK OD 1.375” 1.750” 2.313” REACH SHORT REACH 1.25” 1.30” 1.38” MEDIUM REACH 2.05” 2.10” 2.20” LONG REACH 2.60” 2.60” 2.70” LENGTH SHEAR-UP MODE 19.46” 20.25” 21.41” SHEAR-DOWN MODE 22.40” 23.63” 23.77” MATERIAL Alloy Alloy Alloy ACCESSORY: Pinning Tool Assembly 16711004 16711004 16711005 RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

Glossary ROTN (Non-Selective) Test Tool Assembly ROTN (Non-Selective) Test Tool Assembly The Rebco ROTN Non-Selective Test Tool is a single-trip, seat-and-seal pressure barrier that lands on the bottom No-Go shoulder of any compatible bottom No-Go Landing Nipple to hold applied pressure from above, allowing the tubing string above the tool to be pressure tested from surface, leak-located, or used to set a hydraulic-set packer. Like the ROTFB-2 and ROTRB-2 , the ROTN is not locked in the nipple profile; it rests and seals on the nipple's No-Go shoulder under its own weight and the applied test pressure, and incorporates a built-in equalizing feature to equalize pressure before retrieval. The ROTN 's "non-selective" designation means it cannot land on a specific nipple among several of the same size in a tubing string; it will seat in the first compatible bottom No-Go nipple it encounters while being run in. For this reason, the ROTN is most effective when there is a single target nipple or when the bottommost nipple in the string is the intended test point. The ROTN is a versatile tool compatible with a variety of Landing Nipple types that share a bottom No-Go design and compatible packing bore, making it a flexible choice when only a single test depth is required, and selective positioning is not needed. Available in nominal sizes 2" through 5½", covering seal bore sizes from 1.781" to 4.562", the broadest size range of any test tool in Section VIII. Run and retrieve using the SB Pulling Tool or JDC Pulling Tool, selected by nominal size. All assemblies are manufactured from NACE MR-01-75 compliant normal alloy. How to Order: Product Code 14. Specify nominal size, seal bore size, and material. Confirm that the bottom No-Go nipple type is present in the completion and that the packing bore is compatible with the ROTN . Non-standard sizes and materials available on request. Back to the Tool page PDF download ROTN (Non-Selective) Test Tool Assembly ROTN (Non-Selective) Test Tool Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary CO & CD Knuckle Jar Assembly CO & CD Knuckle Jar Assembly CO Knuckle Jar (Threaded) The Rebco CO Knuckle Jar is similar in design to the standard knuckle joint but incorporates an extended socket that allows the ball to travel vertically through a short stroke, providing a light jarring action in addition to the angular flexibility of a standard knuckle joint. This dual function makes the knuckle jar particularly useful for bottomhole pressure (BHP) work and light-duty wireline applications, where tool string flexibility and light jarring capability are required in a single component. Available in 2", 4", 6", and 8" stroke options, in standard threaded connections, 1¼"–2½" OD. CD Knuckle Jar (RQLD) The Rebco CD Knuckle Jar is the RQLD quick-lock version of the Rebco CO , delivering the same dual-function flexibility and light jarring capability with the speed of Rebco 's double-shoulder Quick Lock System connection. Available in RQLD connections, 1¼"–2½" OD. Back to the Tool page PDF download CO & CD Knuckle Jar Assembly CO & CD Knuckle Jar Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Equalizing Prong ROTPRR Plug Choke Assembly Plug Assemblies Equalizing Prong ROTPRR Plug Choke Assembly Equalizing Prong ROTPRR Plug Choke Assembly Rebco Equalizing Prong ROTPRR Plug Choke Assembly, when landed in ROTR Landing Nipple , of the same size, will plug off the nipple and tubing. The Plug Choke is capable of holding pressure differentials from above or below. NOTE: Equalizing Prong ROTPRR Plug Choke Assembly is made up of ROTR Lock Mandrel (PRODUCT CODE 10, 17, and/or 18) and ROTPR Equalizing Prong and Sub-Assembly with a Cap (PRODUCT CODE 20) . Product Code: 21 REQUEST A QUOTE DOWNLOAD DATASHEET Equalizing Prong ROTPRR Plug Choke Assembly Equalizing Prong ROTPRR Plug Choke Assembly Click here Applications Plugging and bidirectional pressure holding in ROTR Landing Nipples across seal bore sizes of 1.710" through 4.562", with larger sizes available on inquiry. Completions requiring a more positive prong-seated pressure seal than the valve-type ROTRR provides Applications where independent prong running allows the plug body to be confirmed set before the pressure-holding element is deployed, reducing the risk of a failed plug installation Large-bore and Safety Valve nipple sizes (5.875" and 5.963") available on inquiry H2S service environments requiring Norm Alloy construction Key Benefits The Equalizing Prong seated V-Packing provides a robust, mechanically positive pressure seal from both above and below, suited to demanding differential pressure applications. Running the Check Set Tool before the Prong provides a two-stage confirmation that the plug body is correctly seated before the pressure element is committed, reducing the risk of failed installations in critical wells. Equalizing Prong lengths can be custom-ordered to suit specific tool string requirements. Covers sizes up to 5.963" on inquiry, encompassing the largest completion nipple profiles in the Rebco range. Available in a variety of materials to suit downhole conditions. The Plug requires TWO runs to be set. Before Equalizing Prong is run in place, it is recommended to run a CHECK SET TOOL (ACCESSORY) . Plug Chokes are available in a variety of Materials, suitable for down-hole conditions. Norm Alloy is suitable for H 2 S Service (NACE MR-01-2 75, Latest Revision) TECHNICAL DATA NIPPLE SEAL BORE SIZE 1.710” 1.781” 1.875” 2.000” ASSEMBLY NUMBER 2111131317130 2111131317830 2111131318730 2111131320030 ENGINEERING DATA MAXIMUM OD (NO-GO) 1.705” 1.776” 1.870” 1.995” OVER ALL LENGTH 26.0” 26.0” 26.0” 26.0” RUNNING TOOL - ROTR 41132017100 41132017800 41132018700 41132020000 PULLING TOOL - ROTGR 40051315000 40051317800 40051318700 40051318700 EQUALIZING PRONGS FISHING NECK SIZE 1.187” 1.187” 1.187” 1.187” RUNNING/PULLING TOOL 4014011500 4014011500 4014011500 4014011500 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102131710 4102132000 4102132000 4102132000 NIPPLE SEAL BORE SIZE 2.125” 2.188” 2.313” 2.562” ASSEMBLY NUMBER 2111131321230 2111131321830 2111131323130 2111131325630 ENGINEERING DATA MAXIMUM OD (NO-GO) 2.120” 2.183” 2.308” 2.557” OVER ALL LENGTH 26.0” 26.56”” 26.56” 32.53” RUNNING TOOL - ROTR 41132021200 41132021800 41132023100 41132025600 PULLING TOOL - ROTGR 40051318700 40051321800 40051323100 40051323100 EQUALIZING PRONGS FISHING NECK SIZE 1.187” 1.375” 1.375” 1.375” RUNNING/PULLING TOOL 4014011500 4014012000 4014012000 4014012000 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102132000 4102132180 4102132310 4102132560 NIPPLE SEAL BORE SIZE 2.750” 2.813” 3.437” 3.688” ASSEMBLY NUMBER 2111131327530 2111131328130 2111131334330 2111131336830 ENGINEERING DATA MAXIMUM OD (NO-GO) 2.745” 2.808” 3.432” 3.683” OVER ALL LENGTH 28.13” 28.13” 28.13” 37.15” RUNNING TOOL - ROTR 41132027500 41132028100 41132034300 41132036800 PULLING TOOL - ROTGR 40051327500 40051327500 40051331202 40051336804 EQUALIZING PRONGS FISHING NECK SIZE 1.375” 1.375” 1.750” 2.313” RUNNING/PULLING TOOL 4014012000 4014012000 4014012500 4014013000 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102133000 4102133000 4102133430 4102133680 NIPPLE SEAL BORE SIZE 3.813” 4.125” 4.313” 4.562” ASSEMBLY NUMBER 2111131338130 2111131341230 2111131343130 2111131345630 ENGINEERING DATA MAXIMUM OD (NO-GO) 3.808” 4.120” 4.308” 4.557” OVER ALL LENGTH 37.38" 38.1" 38.61" 38.6” RUNNING TOOL - ROTR 41132038100 41132041200 41132043100 41132045600 PULLING TOOL - ROTGR 40051336804 40051336804 40051336804 40051345600 EQUALIZING PRONGS FISHING NECK SIZE 2.313” 2.313” 3.125” 3.125” RUNNING/PULLING TOOL 4014013000 4014013000 4014014000 4014014000 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102133810 4102134120 4102134310 4102134560 * Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision) RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

ROTX Landing Nipple Landing Nipples ROTX Landing Nipple ROTX Landing Nipple The Rebco ROTX Landing Nipple is a selective landing profile for positioning, sealing, and locking compatible wireline-deployed flow-control equipment within standard-weight production tubing. Multiple ROTX nipples with the same internal profile can be installed at selected depths, allowing a compatible selective running tool to place, retrieve, or relocate equipment at the required position in the completion string. Product Code: 11 REQUEST A QUOTE DOWNLOAD DATASHEET ROTX Landing Nipple ROTX Landing Nipple Click here Applications Positions compatible wireline flow-control devices at selected depths in the production tubing string. Supports the installation and retrieval of compatible blanking plugs, check valves, safety valves, and downhole flow-control equipment. Provides landing locations for pressure and temperature gauge hangers. Allows compatible equipment to be moved to another X nipple if completion requirements or well conditions change. Key Benefits Selective setting: Multiple X nipples can be installed in the same tubing string, allowing compatible tools to be placed at the required depth. Large bore design: Helps minimize flow restriction through the completion. Simplified intervention: Compatible tools can be deployed, retrieved, and repositioned by slickline without pulling the tubing, where operating conditions permit. Common internal profile: Supports a consistent landing interface across multiple nipple locations. TECHNICAL DATA Tubing OD Size NIPPLE - ‘ROTX’ NIPPLE - ‘ROTXN’ Seal Bore Seal Bore No-Go ID Inches mm Inches mm Inches mm Inches mm Inches mm 1.660 42.16 1.250 31.75 1.250 31.75 1.250 31.75 1.135 28.83 1.900 48.26 1.500 38.1 1.500 38.1 1.500 38.1 1.448 36.78 2 1/16 52.37 1.625 41.28 1.625 41.28 1.625 41.28 1.536 39.01 2 3/8 60.33 1.875 47.63 1.875 47.63 1.875 47.63 1.791 45.49 2 7/8 73.02 2.313 58.75 2.312 58.75 2.312 58.75 2.205 56.01 3 1/2 88.9 2.750 69.85 2.750 69.85 2.750 69.85 2.635 66.93 2.813 71.45 2.813 71.45 2.813 71.45 2.666 67.72 2.875 73.03 2.875 73.03 2.875 73.03 2.760 70.10 4 101.60 3.313 84.15 3.313 84.15 3.313 84.15 3.135 79.63 4 1/2 114.30 3.813 96.85 3.813 96.85 3.813 96.85 3.725 94.62 5 127.0 4.313 109.55 4.313 109.55 4.313 109.55 3.987 101.27 5 1/2 139.70 4.562 115.87 4.562 115.87 4.562 115.87 4.455 113.16 4.813 122.25 4.813 122.25 4.813 122.25 4.725 120.02 7 177.80 5.963 151.46 5.963 151.46 5.963 151.46 5.770 146.56 7 5/8 193.68 6.125 155.58 6.125 155.58 6.125 155.58 5.937 150.80 RELATED TOOLS ROTXN Landing Nipple VIEW ROTX Lock Mandrel Assembly VIEW Valve ROTXX Plug Choke Assembly VIEW Equalizing Prong ROTPXX Plug Choke Assembly VIEW Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

Glossary Modified PORN & POXN Test Tool Plug Assembly Modified PORN & POXN Test Tool Plug Assembly The Rebco Modified PORN and POXN Test Tool Plug Assembly is a two-component pressure barrier system: a Lock Mandrel and a Prong, used to create a robust, retrievable plug in bottom No-Go type Landing Nipples for pressure testing. The assembly holds pressure only from above, achieved by orienting the V-Packing on both the Lock Mandrel and the Prong upward so they seal against downward-acting test pressure from the surface. The two-component design, which runs Lock Mandrel and Prong separately, provides operational flexibility that a single-body plug does not. The Lock Mandrel can be run first and set in the nipple independently (using a Running Tool, followed by a Check Set Tool to confirm proper key setting), and the Prong is then run into the set mandrel separately on an SB Pulling Tool. Alternatively, when the Lock Mandrel keys are not used, the Prong can be pre-assembled into the mandrel and the entire assembly run in one trip on an SB Pulling Tool. The extra-long Prong option is a notable feature: by extending below the Lock Mandrel, the long Prong acts as a stand-off, keeping the base of the plug assembly clear of sand or scale accumulation at the nipple base. This significantly reduces the risk of the assembly becoming stuck and difficult to retrieve after the pressure test, a common operational hazard in wells with sand or scale production. Retrieval is a two-stage process: the Prong is pulled first (using an SB Pulling Tool), then the Lock Mandrel is retrieved separately (using a ROTGS Pulling Tool). In clean wells, the complete assembly, Lock Mandrel and Prong together, is sometimes recovered in a single pull. How to Order: Product Code 14. Specify the Lock Mandrel type ( PORN for ROTR / ROTRN nipples; POXN for ROTX / ROTXN nipples), size, and desired Prong length. State whether keys are required. Contact Rebco to specify the profile type and all component parameters. Back to the Tool page PDF download Modified PORN & POXN Test Tool Plug Assembly Modified PORN & POXN Test Tool Plug Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

EO Roller Stem (Weight Bar) Tool String EO Roller Stem (Weight Bar) EO Roller Stem (Weight Bar) Rebco EO Roller Stems are with Threaded Connections - (Sucker Rod Type) Product Code: 101 REQUEST A QUOTE DOWNLOAD DATASHEET EO Roller Stem (Weight Bar) EO Roller Stem (Weight Bar) Click here Applications Deviated and directional wellbores where tool string drag prevents reaching total depth Corkscrew tubing conditions where the conventional stem hangs up Any well where friction losses are reducing the effectiveness of jarring operations Key Benefits Rollers reduce drag against the tubing wall, improving reach and jar action in deviated wells. Available in 2, 3, or 4 roller configurations per section to suit deviation severity Roller material and OD can be customized; nylon rollers are available for coated tubing. Available in 2 ft, 3 ft, and 5 ft lengths for precise weight management TECHNICAL DATA ASSEMBLY PART NUMBER NOMINAL SIZE (OD) ENGINEERING DATA LENGTH THREAD CONNECTIONS FISHING NECK NO * ROLLERS ROLLER OD * 10104201252 1 1/4” 24” 15/16” - 10 1.187” 2 1.50” 10104201253 36” 3 10104201255 60” 4 10104201502 1 1/2” 24” 1.375” 2 1.75” 10104201503 36” 3 10104201505 60” 4 10104201752 1 3/4” 24” 1 1/16” - 10 1.750” 2 2.20” 10104201753 36” 3 10104201755 60” 4 10104201872 1 7/8” 24” 2 10104201873 36” 3 10104201875 60” 4 10104202122 2 1/8” 24” 2 2.75” 10104202123 36” 3 10104202125 60” 4 10104202502 2 1/2” 24” 2.313” 2 3.25” 10104202503 36” 3 10104202505 60” 4 RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

Glossary DB Dump Bailer Assembly DB Dump Bailer Assembly The Rebco Dump Bailer is a pressure-activated fluid delivery tool designed to deposit precisely controlled volumes of treatment fluid, chemical solvents, acid, or other wellbore treatment agents at a specific depth within the tubing or casing string. The tool consists of a top sub with a fishing neck, a sealed barrel charged with treatment fluid at the surface, and a shear-disc piston mechanism at the barrel's lower end. The barrel is sealed at atmospheric pressure at the surface, isolating the treatment fluid from wellbore contact during the run-in phase. When the desired depth is reached, a pre-determined number of downward jar blows are applied at the surface to shear the internal release disc. Once the disc shears, a plunger is driven through it, opening a flow path from the barrel to the wellbore. The stored treatment fluid exits the barrel downward into the wellbore directly onto the target zone, subsurface device, or debris accumulation. The shear disc thickness is selected at the surface based on the wellbore pressure range encountered: thinner brass discs for lower-pressure wells and thicker discs for higher-pressure wells. Barrel sizes of 5 ft standard length are available across all OD sizes, and extension barrels can be stacked to increase delivery volume for large-scale treatment operations. The OD of the lower foot assembly should be matched to the device or zone upon which the fluid is to be deposited. Available in standard threaded connections, 1½"–4" OD. Extension barrels available. Back to the Tool page PDF download DB Dump Bailer Assembly DB Dump Bailer Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.

Glossary ROTR & ROTL (Bottom No-Go) Lock Mandrel Sub-Assembly ROTR & ROTL (Bottom No-Go) Lock Mandrel Sub-Assembly The Rebco ROTR and ROTL are Bottom No-Go Lock Mandrel Sub-Assemblies, the bottom-referenced counterparts to the ROTG and ROTN . They are designed to be set in BR Landing Nipples and share the same External Fishing Neck and large flow area design as the ROTG and ROTN , making them suitable for high-volume completions. Collet-type locking fingers prevent upward movement, while the No-Go shoulders prevent downward travel. The ROTR is essentially a ROTL sub-assembly without the Packing Unit and Packing Mandrel; the ROTL includes the full Packing Unit for applications requiring a pack-off. Both are available in nominal sizes of 2 3/8" and 2 7/8", with seal bores from 1.781" to 2.250", and are constructed from Norm Alloy. Running and pulling tool requirements are the same as for the ROTG and ROTN family, using the ROTC-1 Running Tool with Shank BN-1, and the ROTRB Pulling Tool with Probe BN-1. How to Order: Product Code 10. Specify lock type ( ROTR for no pack-off, ROTL for pack-off), nominal tubing size (2 3/8" or 2 7/8"), seal bore size, and material. Refer to Page XIV-18 for tool selection for running and pulling. Back to the Tool page PDF download ROTR & ROTL (Bottom No-Go) Lock Mandrel Sub-Assembly ROTR & ROTL (Bottom No-Go) Lock Mandrel Sub-Assembly Click here RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco ’s Terms and Conditions of Sale.