Pulling Tools
PULLING TOOLS were designed primarily to retrieve subsurface locking devices and other downhole Wireline Service Equipment from the tubing bore. These downhole tools have a fishing neck, or the pulling neck, machined near the upper end for the Pulling Tool to engage and latch, hence retrieving it to the surface.
There are two types of Fishing Necks: internal and External. Hence, there are two types of Pulling Tools: those for the External Fishing Neck and those for the Internal Fishing Neck.
Both types of Pulling Tools are constructed so that they may be released from the subsurface device in the tubing bore in the event that the device becomes stuck and cannot be retrieved. This release feature is accomplished by a shearing pin installed in the Pulling Tool; once sheared, the design of the Pulling Tool releases the device.
The jarring action to shear the pin may be upward or downward, depending on the Pulling Tool used. Thus, the name SHEAR UP or SHEAR DOWN Pulling Tool.
Once the type (there are several types, depending on its function) of the PULLING TOOL is identified as being used to retrieve a sub-surface device, a REACH should be considered. REACH refers to the distance from the bottom of the core to the engaging surface of the dogs. That is, the Pulling Tool must engage or latch the Fishing Neck fully in order to be functional. This information is stated in the ENGINEERING DATA for each of the Pulling Tools, or it can be measured as shown in (see Fig 1).
JDC Pulling Tool (Short Reach) Assembly
Rebco offers two Types of designs for the Shear down Pulling Tools: JD and S.
Both Pulling Tool types are designed to run and retrieve sub-surface equipment with external fishing neck. The tools can be released by jarring down.
Product Code: 40
JDS Pulling Tool (Medium Reach) Assembly
Rebco offers two Types of designs for the Shear down Pulling Tools: JD'and S.
Both Pulling Tool types are designed to run and retrieve sub-surface equipment with external fishing neck. The tools can be released by jarring down.
Product Code: 40
SB Pulling Tool (Short Reach) Assembly
Rebco SB Pulling Tool is designed to run and retrieve sub surface equipment with External fishing neck. The tool can be released by jarring down.
Product Code: 40
SS Pulling Tool (Medium Reach) Assembly
Rebco SS Pulling Tool is designed to run and retrieve sub surface equipment with external fishing neck. The tool can be released by jarring down.
Product Code: 40
JUC Pulling Tool (Short Reach) Assembly
Rebco offers two Types of designs for the Shear up Pulling Tools: JU with R
Both Pulling Tool types are designed to run and retrieve sub-surface equipment with external fishing neck. The tools can be released by jarring up.
Product Code: 40
ROTJUS Pulling Tool (Medium Reach) Assembly
Rebco offers two Types of designs for the Shear up Pulling Tools: JU with R
Both Pulling Tool types are designed to run and retrieve sub-surface equipment with external fishing neck. The tools can be released by jarring up.
Product Code: 40
RB Pulling Tool (Short Reach) Assembly
R Pulling Tool series are Shear Up design for external Fishing Neck.
Rebco offers a wide range of sizes within this group of Pulling Tools. These Tools are offered with three basic reaches to retrieve the Sub-Surface devices with external Fishing Neck.
Product Code: 40
RS Pulling Tool (Medium Reach) Assembly
R Pulling Tool series are Shear Up design for external Fishing Neck.
Rebco offers a wide range of sizes within this group of Pulling Tools. These Tools are offered with three basic reaches to retrieve the Sub-Surface devices with external Fishing Neck.
Product Code: 40
RJ Pulling Tool (Long Reach) Assembly
R Pulling Tool series are Shear Up design for external Fishing Neck.
Rebco offers a wide range of sizes within this group of Pulling Tools. These Tools are offered with three basic reaches to retrieve the Sub-Surface devices with external Fishing Neck.
Product Code: 40
GS Pulling Tool Assembly
Rebco offers two Types of Pulling Tools for Internal Fishing Neck: GS with GSL Both Pulling Tool types are designed to run and retrieve Sub-Surface equipment with internal fishing neck. The tools can be released by jarring down.
Rebco GS Pulling Tool is designed to run and retrieve Sub-Surface equipment with internal fishing neck. The tool can be released by jarring down.
Product Code: 40
GSL Pulling Tool Assembly
Rebco GSL Pulling Tool is designed to retrieve ROTD Collar Lock Mandrel, see PRODUCT CODE 10. The tool can be released by jarring down.
NOTE: GSL Pulling Tool has extended Core (longer reach), and it should be used only to retrieve ROTD Collar Lock Mandrel.
Product Code: 40
GU Shear-Up Adapter Tool Assembly
Rebco GU Shear-Up Adapter is used with GS Pulling Tool when the need for jar up is required to release the Sub-Surface device.
See GR Pulling/Running Tool Assembly (PRODUCT 40).
Product Code: 40
GR Pulling Tool Assembly
Rebco GR Pulling Tool is a combination tool made up of the GS Pulling Tool and GU Shear-Up Adapter.
NOTE: Do not place a SHEAR PIN in the GS Pulling Tool section of the GR Pulling Tool Assembly.
Product Code: 40
GRL Pulling Tool Assembly
Rebco GRL Pulling Tool is a combination tool made up of the GSL Pulling Tool and GU Shear-Up Adapter.
Product Code: 40
BB Pulling Tool Assembly
Rebco BB Pulling Tool is a Shear-Up Pulling Tool with exposed dogs, and a smaller diameter of the shear pin. These features are advantageous when retrieving devices that may have obstructions such as wire around its external fishing neck, and in the event that the Pulling Tool needs to be released, the shear pin can be sheared more readily than the skirted type of Pulling Tools.
Product Code: 40
BE Pulling Tool Assembly
Rebco BE Pulling Tool is identical to the BB Pulling Tool except that the Dogs are longer, therefore longer reach.
Product Code: 40
RH Heavy Duty Pulling Tool Assembly
Rebco RH Heavy Duty Pulling Tool uses a collet (360o) type latching around the external Fishing Neck which allows for heavier jarring action.
Product Code: 40
Three Types of RH Pulling Tools are offered: Designated (Named) by the Reach
RH' - Short Reach
RHM - Medium Reach
RHL - Long Reach
RMF Pulling Tool Assembly
Rebco RMF Pulling Tool is a Multi-Functional Tool design, sometimes called a 'Universal Tool'. The Tool is used to run and retrieve Wireline set devices with external Fishing Necks.
Product Code: 40
RQ Pulling Tool (Shear Up) Assembly
Rebco RQ Pulling Tool is a Special Tool design to fish tools with Rebco Type RQLD Fishing Necks.
Product Code: 40
SQ Pulling Tool (Shear Down) Assembly
Rebco SQ Pulling Tool is a Special Tool design to fish tools with Rebco Type RQLD Fishing Necks.
Product Code: 40
DSD Double Shear Down Adapter Sub-Assembly
Rebco DSD Double Shear Down Adapter Sub-Assembly is designed to be used with Rebco S (Shear Down) Pulling Tools.
The Adapter allows the Pulling Tools to function as before with the exception that the Tools can be released by jarring down on either the Core or the Cylinder of the Pulling Tools. Moreover, the Short Core in the Pulling Tool increases the reach.
Product Code: 40
SSJ Running and Pulling Tool Assembly
Rebco SSJ Double Shear Down Pulling Tool is designed to run and retrieve subsurface equipment with external fishing neck.
Double Shear Down Adapter (DSD - PRODUCT 40) is used with S Pulling Tools, the Adapter allows the Pulling Tools to function as before with the exception that the tools can be released by jarring down on either the Core or the Cylinder of the Pulling Tool.
Product Code: 40