OTHER TYPES OF PLUG CHOKES Plug Assemblies OTHER TYPES OF PLUG CHOKES OTHER TYPES OF PLUG CHOKES Product Code 20: D - PLUGS: Circulating Type Chokes for Nipple Product Code 20: E - PLUGS: Circulating Blanking Plugs for Nipples Product Code 21: F - PLUGS: Pump Through Product Code 20: G - Plug Chokes for Tubing REQUEST A QUOTE DOWNLOAD DATASHEET OTHER TYPES OF PLUG CHOKES OTHER TYPES OF PLUG CHOKES Click here Product Code 20: D - PLUGS: Circulating Type Chokes for Nipple Circulating Chokes restrict fluid flow in the tubing string. A wide range of orifice sizes in the Bean (designated by 64 th ); often used to measure the flow. Used to reduce the production when desirable. Types Available: ROTAX , ROTAR , ROTFWT , ROTRZT - Specify Nipple Profile, Size of Seal Bore, Material required, Size of Bean orifice ________________________________________________________________ Product Code 20: E - PLUGS: Circulating Blanking Plugs for Nipples Circulating Blanking Plugs hold pressure from below while allowing circulation from above. The internal Valve is depressed to allow by-pass while running or pulling the Plug. Types Available: ROTCX , ROTCR , ROTFSB , ROTFWB , ROTRZB , ROTFGB , ROTFMB , ROTRKB - Specify Nipple Profile, Size of Seal Bore, Material required. ________________________________________________________________ Product Code 21: F - PLUGS: Pump Through Pump Through Plugs hold pressure from below Types Available: RXO , RXN , XRO , XRN - Specify Nipple Profile, Size of Seal Bore, Material required. ________________________________________________________________ Product Code 20: G - Plug Chokes for Tubing Plug Chokes for Tubing are used to hold limited pressure differentials while allowing circulation from above. Types Available: ROTCW , ROTDW , ROTDD , ROTCD Specify when Ordering TECHNICAL DATA RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

ROTB & ROTH Equalizing Sub Equalizing Sub-Assemblies ROTB & ROTH Equalizing Sub ROTB & ROTH Equalizing Sub Rebco ROTB & ROTH Equalizing Subs are to be used with Sub-Surface Controls such as Locking Mandrels. Both Equalizing Subs are identical except the ID is larger in ROTH Equalizing Sub. These Sub-Assemblies are designed to allow pressure differentials to be equalized across the Lock Mandrels and Flow controls before attempting to retrieve them. Product Code: 20 REQUEST A QUOTE DOWNLOAD DATASHEET ROTB & ROTH Equalizing Sub ROTB & ROTH Equalizing Sub Click here Applications Equalizing pressure across Lock Mandrels and flow control devices in 2", 2-1/2", and 3" nominal sizes before retrieval attempts Applications requiring a small, controlled equalization flow rate using the .003" orifice (ROTB), a moderate flow rate using the .006" orifice (ROTH), or a larger flow rate using the .011" orifice variant Any completion where trapped pressure below a set lock mandrel must be safely bled off prior to pulling operations Key Benefits Three orifice sizes (.003", .006", .011") provide graduated control over the equalization flow rate, allowing the operator to match the equalization speed to the well's pressure conditions and the sensitivity of adjacent equipment. Identical dimensions across the ROTB and ROTH simplify inventory; the only difference between the two is the orifice size and minimum ID. Stainless Steel construction provides corrosion resistance for long service life in aggressive downhole environments. Available in a variety of materials suitable for specific downhole conditions. NOTE: These types of Equalizing Subs require running/pulling equalizing prongs. Equalizing Subs are available in variety of Materials, suitable for down-hole conditions. TECHNICAL DATA ROTB Equalizing Subs NOMINAL SIZE 2” 2 1/2” 3” ASSEMBLY NUMBER 2001202000 2001202500 2001203000 ENGINEERING DATA MAXIMUM OD 1.75” 2.12” 2.62” MINIMUM ID .53” .72” 1.16” EFFECTIVE AREA THRU ORIFICE PLATE .003” .003” .003” BOX THREAD CONNECTION 1 3/16” - 14 1 9/16” - 12 2” - 12 PIN THREAD CONNECTION 1 3/16” - 14 1 9/16” - 12 2” - 12 LENGTH 4.25” 4.25” 4.25” MATERIAL Stainless Stainless Stainless ROTH Equalizing Subs NOMINAL SIZE 2” 2 1/2” 3” ASSEMBLY NUMBER 2006202000 2006202500 2006203000 ENGINEERING DATA MAXIMUM OD 1.75” 2.12” 2.62” MINIMUM ID .69” .87” 1.50” EFFECTIVE AREA THRU ORIFICE PLATE .006” .006” .006” BOX THREAD CONNECTION 1 3/16” - 14 1 9/16” - 12 2” - 12 PIN THREAD CONNECTION 1 3/16” - 14 1 9/16” - 12 2” - 12 LENGTH 4.25” 4.25” 4.25” MATERIAL Stainless Stainless Stainless RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

CR Check Set Tool Assembly Service Tools CR Check Set Tool Assembly CR Check Set Tool Assembly The Rebco CR Check Set Tool is engineered to confirm the proper setting of ROTR and ROTRN Lock Mandrels within their corresponding Landing Nipple profiles. This tool ensures the lock mandrel is correctly engaged and seated before proceeding with subsequent operations. Product Code: 41 REQUEST A QUOTE DOWNLOAD DATASHEET CR Check Set Tool Assembly CR Check Set Tool Assembly Click here Applications Confirming the correct set position and load resistance of lock mandrels and downhole controls after wireline setting operations Verifying that a device will not shift under production loading before the workover or wireline unit is released from the well Troubleshooting suspected partial sets without pulling the device to the surface Key Benefits Provides direct in-situ confirmation of correct set position, eliminates uncertainty without a pull run. CX (downstroke check) and CR (upstroke check) together verify device integrity in both load directions. Available in all standard tool string sizes NOTE: For Rebco CX & CR Check Set Tools that are not listed, please inquire. TECHNICAL DATA NOMINAL SIZE 2 1/16” 2” 2” 2” For LOCK MANDREL SIZE 1.710” 1.788” 1.875” 2.125” ASSEMBLY NUMBER 4102131710 4102131780 4102131870 4102132120 NOMINAL SIZE 2 1/2” 2 1/2” 3” 3 1/2” For LOCK MANDREL SIZE 2.188” 2.313” 2.562” 3.437” ASSEMBLY NUMBER 4102132180 4102132310 4102132560 4102133430 NOMINAL SIZE 4 1/2” 4 1/2” 5 1/2” 5 1/2” For LOCK MANDREL SIZE 3.688” 3.813” 4.313” 4.562’ ASSEMBLY NUMBER 4102133680 4102133810 4102134310 4102134560 ENGINEERING DATA: MAXIMUM OD 3.62” 3.62” 4.28” 4.50” PIN THREAD CONNECTION 1 1/16’ - 10 1 1/16’ - 10 1 1/16’ - 10 1 1/16’ - 10 FISHING NECK OD 2.313” 2.313” 2.313” 2.313” LENGTH 15.53” 15.92” 16.14” 17.18” MATERIAL Alloy Alloy Alloy Alloy RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

GOS Single Conductor Cable Head Assembly Tool String GOS Single Conductor Cable Head Assembly GOS Single Conductor Cable Head Assembly Rebco GOS Single Conductor Cable head Assembly provides mechanical and Electrical Connections from the wireline cable to the tool string. The Assembly has a Spring-Loaded Contact Plug. Product Code: 100 REQUEST A QUOTE DOWNLOAD DATASHEET GOS Single Conductor Cable Head Assembly GOS Single Conductor Cable Head Assembly Click here Applications Connecting single-conductor electric wireline to downhole electronic instrumentation BHP and temperature gauge deployments requiring a live electrical connection Any downhole tool requiring power or signal transmission from the surface Key Benefits Spring-loaded contact design maintains electrical continuity during dynamic downhole conditions Provides both mechanical strength and electrical connectivity in a single component Alloy Material is used to manufacture Rebco ROPE SOCKETS. Materials suitable for specific well conditions are available. Must be ordered by Wire Size in use. Sizes not listed are also available, please enquire. TECHNICAL DATA NOMINAL SIZE ASSEMBLY NO. FISH NECK OD MAX OD BOX THD CONNECTION FOR CABLE SIZE LENGTH 1 7/16” 100052014144009 1.00” 1.44” 1 3/16” – 12 Pin 1/8” 13.76” 100052014144004 3/16” 100052014144005 7/32” 100052014144006 1/4” 100052014144007 5/16” 100052014144012 7/16” 1 11/16” 100052014169009 1.375” 1.687” 1 3/16” – 12 Pin 1/8” 13.76” 100052014169004 3/16” 100052014169005 7/32” 100052014169006 1/4” 100052014169007 5/16” 100052014169012 7/16” RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

Equalizing Prong ROTPRRN Plug Choke Assembly Plug Assemblies Equalizing Prong ROTPRRN Plug Choke Assembly Equalizing Prong ROTPRRN Plug Choke Assembly Rebco Equalizing Prong ROTPRRN Plug Choke Assembly, when landed in ROTRN Landing Nipple , of the same size, will plug off the nipple and tubing. The Plug Choke is capable of holding pressure differentials from above or below. NOTE : Equalizing Prong ROTPRRN Plug Choke Assembly is made up of ROTRN Lock Mandrel (PRODUCT CODE 10, 17, and/or 18) and ROTPR Equalizing Prong and Sub-assembly with a Cap (PRODUCT CODE 20) . Product Code: 21 REQUEST A QUOTE DOWNLOAD DATASHEET Equalizing Prong ROTPRRN Plug Choke Assembly Equalizing Prong ROTPRRN Plug Choke Assembly Click here Applications Plugging and bidirectional pressure holding in ROTRN Landing Nipples across seal bore sizes of 1.710" through 4.562", with larger sizes available on inquiry. Completions requiring both a No-Go positional stop and a robust prong-seated pressure seal Applications where the two-stage setting process (Check Set Tool followed by Prong run) and the No-Go shoulder together provide the highest available level of installation certainty for a critical plug Key Benefits Combines the No-Go mechanical depth stop of the ROTRN Lock Mandrel with the positive prong-seated V-Packing pressure seal of the ROTPR sub-assembly, providing the most mechanically positive plug setting in the ROTR nipple family. Shares all tool numbers with the ROTPRR series, keeping cross-family inventory manageable. Equalizing Prong lengths can be custom-ordered to suit specific requirements. Available in a variety of materials to suit downhole conditions. The Plug requires TWO runs to be set. Before Equalizing Prong is run in place, it is recommended to run a CHECK SET TOOL (ACCESSORY) . Plug Chokes are available in a variety of Materials, suitable for down-hole conditions. Norm Alloy is suitable for H 2 S Service (NACE MR-01-2 75, Latest Revision) NOTE: - Sizes 5.875" and 5.963" Plug Chokes are available, please inquire. Equalizing Prong lengths can be ordered to suit special requirements. TECHNICAL DATA NIPPLE SEAL BORE SIZE 1.710” 1.781” 1.875” 2.000” ASSEMBLY NUMBER 211113131017130 211113131017830 211113131018730 211113131020030 ENGINEERING DATA MAXIMUM OD (NO-GO) 1.705” 1.776” 1.870” 1.995” OVER ALL LENGTH 26.0” 26.0” 26.0” 26.0” RUNNING TOOL - ROTR 41132017100 41132017800 41132018700 41132020000 PULLING TOOL - ROTGR 40051315000 40051317800 40051318700 40051318700 EQUALIZING PRONGS FISHING NECK SIZE 1.187” 1.187” 1.187” 1.187” RUNNING/PULLING TOOL 4014011500 4014011500 4014011500 4014011500 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102131710 4102132000 4102132000 4102132000 NIPPLE SEAL BORE SIZE 2.125” 2.188” 2.313” 2.562” ASSEMBLY NUMBER 211113131021230 211113131021830 211113131023130 211113131025630 ENGINEERING DATA MAXIMUM OD (NO-GO) 2.120” 2.183” 2.308” 2.557” OVER ALL LENGTH 26.0” 26.56”” 26.56” 32.53” RUNNING TOOL - ROTR 41132021200 41132021800 41132023100 41132025600 PULLING TOOL - ROTGR 40051318700 40051321800 40051323100 40051323100 EQUALIZING PRONGS FISHING NECK SIZE 1.187” 1.375” 1.375” 1.375” RUNNING/PULLING TOOL 4014011500 4014012000 4014012000 4014012000 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102132000 4102132180 4102132310 4102132560 NIPPLE SEAL BORE SIZE 2.750” 2.813” 3.437” 3.688” ASSEMBLY NUMBER 211113131027530 211113131028130 211113131034330 211113131036830 ENGINEERING DATA MAXIMUM OD (NO-GO) 2.745” 2.808” 3.432” 3.683” OVER ALL LENGTH 28.13” 28.13” 28.13” 37.15” RUNNING TOOL - ROTR 41132027500 41132028100 41132034300 41132036800 PULLING TOOL - ROTGR 40051327500 40051327500 40051331202 40051336804 EQUALIZING PRONGS FISHING NECK SIZE 1.375” 1.375” 1.750” 2.313” RUNNING/PULLING TOOL 4014012000 4014012000 4014012500 4014013000 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102133000 4102133000 4102133430 4102133680 NIPPLE SEAL BORE SIZE 3.813” 4.125” 4.313” 4.562” ASSEMBLY NUMBER 211113131038130 211113131041230 211113131043130 211113131045630 ENGINEERING DATA MAXIMUM OD (NO-GO) 3.808” 4.120” 4.308” 4.557” OVER ALL LENGTH 37.38" 38.1" 38.61" 38.6” RUNNING TOOL - ROTR 41132038100 41132041200 41132043100 41132045600 PULLING TOOL - ROTGR 40051336804 40051336804 40051336804 40051345600 EQUALIZING PRONGS FISHING NECK SIZE 2.313” 2.313” 3.125” 3.125” RUNNING/PULLING TOOL 4014013000 4014013000 4014014000 4014014000 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102133810 4102134120 4102134310 4102134560 * Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision) RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

ROTFWG-1 Plug Choke with Removable Mandrel (TOP No-Go) Plug Assemblies ROTFWG-1 Plug Choke with Removable Mandrel (TOP No-Go) ROTFWG-1 Plug Choke with Removable Mandrel (TOP No-Go) NOTE: ROTFWG-1 Plug Choke (By-pass Blanking Plug) with Removable Mandrel uses different type of Lock (Dog). Plug Chokes are available in a variety of Materials, suitable for down-hole conditions. Product Code: 21 REQUEST A QUOTE DOWNLOAD DATASHEET ROTFWG-1 Plug Choke with Removable Mandrel (TOP No-Go) ROTFWG-1 Plug Choke with Removable Mandrel (TOP No-Go) Click here Applications Positive blank-off and bidirectional pressure sealing in BF Landing Nipples and the upper seal bore of the ROTL Sliding Sleeve, using a Top No-Go mechanical stop for certain positional reference Nominal tubing sizes from 2" through 3-1/2", where a Top No-Go removable mandrel plug is the required configuration Completions where selective passing capability is not needed, and the positive No-Go stop is the preferred depth reference. Key Benefits The Top No-Go design provides a mechanical stop at the nipple, preventing the plug from passing the intended depth below. The removable mandrel design allows the mandrel to be run and pulled independently of the sealing element. Shares the same running and pulling tool family as the ROTFSG-2, keeping field inventory consistent across the BF nipple plug family. Redress Kit available for all sizes. Available in a variety of materials to suit downhole conditions. Reference: REDRESS KIT - Only 'V' Packing (Qty - 6 only) included as part of the REDRESS KIT See PRODUCT CODE 10, Lock Mandrels: S-1,2 , W-1,2 & Z-1,2 for more details TECHNICAL DATA NOMINAL SIZE 4 1/2" SEAL BORE SIZE 3.688” 3.750” 3.813” ASSEMBLY NUMBER 2125170513680 2125170513750 2125170513810 ENGINEERING DATA MAXIMUM OD - (No-Go) 3.740” 3.802” 3.864” FISHING NECK OD 3.125” 3.125” 3.125” RUNNING TOOL Note *1 4 1/2” ROTC-1 41022014500 41022014500 41022014500 4 1/2” ROTBG 4101054500 4101054500 4101054500 PULLING TOOL Note *2 SHEAR DOWN SB 4014014000 4014014000 4014014000 JDC (a)(b) 400703024000 (a) 400703024000 (b) 400703024000 SHEAR UP ROTRB 4013014000 4013014000 4013014000 JUC (a)(b) 400716024000 (a) 00716024000(b) 400716024000 PULLING PROBE 4 1/2" ROTB 1950185300 1950185300 1950185300 LENGTH 20.3” 20.3” 20.3” MATERIAL Alloy Alloy Alloy Reference: REDRESS KIT - Only ‘V’ Packing (Qty - 6 only) included as part of the REDRESS KIT Note: *1 – either / or Running Tools can be Used Note: *2 CAUTION: (a) - Pulling Tool ‘ROTJDC’ and ‘ROTJUC’ will not pass thru 3.688” Seal Bore. (b) - Pulling Tool ‘ROTJDC’ and ‘ROTJUC’ will not pass thru 3.750” Seal Bore, but may be used for retrieving if there is no restriction in the tubing above the accessory smaller than the next larger Seal Bore. RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

OK-6 Kick-Over Tool Assembly Gas Lift - Kick Over Tools OK-6 Kick-Over Tool Assembly OK-6 Kick-Over Tool Assembly The Rebco OK-6 Kickover Tool is a wireline service tool designed to install and retrieve compatible 1-in. OD side-pocket subsurface-control devices in appropriate Camco side-pocket mandrels. Used with a compatible running or pulling tool, the OK-6 uses a solid centralizer sleeve to guide and stabilize the tool assembly within the tubing while the locating and kickover components position the attached service tool at the selected side pocket. Product Code: 192 REQUEST A QUOTE DOWNLOAD DATASHEET OK-6 Kick-Over Tool Assembly OK-6 Kick-Over Tool Assembly Click here Applications Installing compatible 1-in. OD gas-lift valves and other side-pocket subsurface-control devices. Retrieving compatible 1-in. OD devices for replacement, inspection, or well servicing. Positioning an attached running or pulling tool at the selected side-pocket mandrel. Supporting wireline intervention in compatible mandrels equipped with the required orienting profile. Key Benefits Sleeve-type centralization: The solid centralizer sleeve provides an alternative method of guiding and stabilizing the tool in the tubing. Controlled pocket alignment: Locating and kickover components assist in orienting the attached service tool with the side pocket. Running and pulling capability: Supports both installation and retrieval when paired with the appropriate compatible service tool. Alternative tool configuration: Provides a centralizer arrangement different from the spring-based OK-5 design for applications where the sleeve configuration is specified. Notes Kick-over SPM Latch Running Tool Pulling Tool Pulling Spacer OK-1 KBMG KBUG BK-2 JK-2 1 ¼ in. JDS 1.66 in. SM - OK-6 OK-6 Centralizer Note: Verify that the tubing internal diameter and selected tool size are suitable for the sleeve-type centralizer configuration. Inspect the centralizer sleeve, locating finger, kick springs, and arm assembly before deployment in accordance with approved service procedures. Redress Kits Available: Rebco offers Major & Minor redress kits and replacement components for OK-6 Kickover Tools, including applicable sleeve-centralizer and kickover components. Provide the tool size and configuration to confirm the correct kit. TECHNICAL DATA NOMINAL SIZE 2 7/8” 3” 4 ½” ASSEMBLY NUMBER 192202462500 192202463000 192202464500 MAXIMUM OD 2.223” 2.500” 3.500” Tubing ID required for proper tool orientation 2.437” 2.921” 3.958” PIN THREAD CONNECTION 15/16” – 10 15/16” – 10 15/16” – 10 FISHING NECK OD 1.375” 1.375” 1.375” LENGTH 67.0” 71.125” 71.87” MATERIAL Alloy Alloy Alloy ACCESSORY: Service Tool: Type ‘ST’ for Detent Spring 5514151 RELATED TOOLS AO & AD Knuckle Joint Assembly VIEW Running Tools for Gas Lift VIEW JDS Pulling Tool (Medium Reach) Assembly VIEW OK-5 Kick-Over Tool Assembly VIEW Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

A Tubing Swage Service Tools A Tubing Swage A Tubing Swage The Rebco A Tubing Swage is engineered to expand or reform constricted areas within the tubing's internal diameter (ID), ensuring the free passage of wireline tools and sub-surface controls. The tool features an outside diameter (OD) nearly equal to the tubing drift size, with tapered upper and lower ends to ease entry and exit. A central bore with lateral ports allows for efficient fluid bypass during operations. Product Code: 107 REQUEST A QUOTE DOWNLOAD DATASHEET A Tubing Swage A Tubing Swage Click here Applications Restoring lightly collapsed or mechanically deformed tubing sections to full drift diameter Opening partially crushed or pinched tubing caused by surface handling, wellhead loads, or external pressure events Opening bull-plug-type end caps on the lower end of the tubing string when required Pre-treatment pass to restore the bore before running subsurface controls into a deformed completion string Key Benefits Restores tubing bore to drift diameter without requiring a rig workover or tubing pull. The dual-tapered design provides gradual reforming action, reducing the risk of the swage sticking in the restriction. Central bore and lateral ports provide fluid bypass to prevent hydraulic lock during transit. Type C version available with a box bottom connection for stacking or specialized configurations Available in ¾"–6⅝" OD; custom sizes on request Tubing Swage can be manufactured to any specific size within the nominal OD range. For available specifications, refer to Table 1. Product Code: 107 How to Order 1.Part Number is 10700x.xxx - 0 for less than 1.00" 2.All Tubing Swages are Part Numbered by 'OD' dimension to 3 decimal places +/- .002" Metric Dimensions are to be marked to 3 decimal places Part Number is 10701xxxx 1 inch = 2.540 cm NOTE: Rebco C Tubing Swage (10702_) has additional Box Connection on the bottom. If Box Connection is other than Pin Connection, please specify. TECHNICAL DATA OD RANGE THREAD FISHING NECK LENGTH MIN MAX .750 1.032 1/2” - 13 .688 7.30 5/8” - 11 .750 1.062 1.281 1.000 8.00 1.296 1.468 1.500 1.730 15/16” - 10 1.187 1.750 2.140 1.375 11.00 2.156 2.375 2.406 2.750 1 1/16” - 10 1.750 2.760 2.906 2.937 3.468 2.313 3.484 4.328 4.375 5.906 3.125 15.00 5.937 6.687 Large Sizes Custom order only: - Thread, FN and Length RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

Valve ROTRRN Plug Choke Assembly Plug Assemblies Valve ROTRRN Plug Choke Assembly Valve ROTRRN Plug Choke Assembly Rebco ROTRRN Plug Choke Assembly, when landed in ROTRN Landing Nipple , of the same size, will plug off the nipple and tubing. The Plug Choke is capable of holding pressure differentials from above or below. NOTE: Valve ROTRR Plug Choke Assembly is made up of ROTRN Lock Mandrel (PRODUCT CODE 10, 17, and/or 18) and ROTR Equalizing Valve Sub-Assembly with a Cap (PRODUCT CODE 20) . Product Code: 20 REQUEST A QUOTE DOWNLOAD DATASHEET Valve ROTRRN Plug Choke Assembly Valve ROTRRN Plug Choke Assembly Click here Applications Plugging and pressure isolation from both above and below in ROTRN Landing Nipples, across seal bore sizes of 1.710" through 4.813." Single-run plug setting with a positive No-Go depth stop, providing an additional level of positioning certainty compared to the selective ROTRR Well shut-in, zone isolation, and pressure holding applications where the No-Go landing profile is already present in the completion string H2S service environments requiring Norm Alloy construction Key Benefits The No-Go bottom shoulder provides a positive mechanical depth stop at the nipple, adding certainty to depth positioning that a selective plug cannot. The single-run setting, identical to the ROTRR, maintains high operational efficiency. Shares all Running Tools, Pulling Tools, and Equalizing Prong numbers with the ROTRR series for the same seal bore sizes, minimizing tool inventory requirements. Check Set Tool (Product Code 41) is available for all sizes. Available in a variety of materials to suit downhole conditions. The Plug requires ONE run to be set. Plug Chokes are available in a variety of Materials, suitable for down-hole conditions. Norm Alloy is suitable for H 2 S Service (NACE MR-01-2 75, Latest Revision) TECHNICAL DATA NIPPLE SEAL BORE SIZE 1.710” 1.781” 1.875” 2.000” ASSEMBLY NUMBER 2013131017130 2013131017830 2013131018730 2013131020030 ENGINEERING DATA MAXIMUM OD (NO-GO) 1.705” 1.776” 1.870” 1.995” LOCK MANDREL FISHING NECK ID 1.06” 1.38” 1.38” 1.38” RUNNING TOOL - ROTR 41132017100 41132017800 41132018700 41132020000 PULLING TOOL - ROTGR 40051315000 40051317800 40051318700 40051318700 EQUALIZING PRONGS RUNNING 49121324 4911793 4911793 4911793 PULLING 49122037 49122078 49122078 49122078 LENGTH 20.5” 20.5” 20.5” 20.5” MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY (PRODUCT CODE 41) : CHECK SET TOOL 4102131710 4102132000 4102132000 4102132000 NIPPLE SEAL BORE SIZE 2.125” 2.188” 2.313” 2.562” ASSEMBLY NUMBER 2013131021230 2013131021830 2013131023130 2013131025630 ENGINEERING DATA MAXIMUM OD (NO-GO) 2.120” 2.183” 2.308” 2.557” LOCK MANDREL FISHING NECK ID 1.38” 1.81” 1.81” 1.81” RUNNING TOOL - ROTR 41132021200 41132021800 41132023100 41132025600 PULLING TOOL - ROTGR 40051318700 40051321800 40051323100 40051323100 EQUALIZING PRONGS RUNNING 4911793 49121325 49121325 4912505 PULLING 49122078 49122081 49122081 49122044 LENGTH 20.5” 20.9” 20.9” 20.4” MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102132000 4102132180 4102132310 4102132560 NIPPLE SEAL BORE SIZE 2.750” 2.813” 3.437” 3.688” ASSEMBLY NUMBER 2013131027530 2013131028130 2013131034330 2013131036830 ENGINEERING DATA MAXIMUM OD (NO-GO) 2.745” 2.808” 3.432” 3.683” LOCK MANDREL FISHING NECK ID 2.31” 2.31” 2.62” 3.12” RUNNING TOOL - ROTR 41132027500 41132028100 41132034300 41132036800 PULLING TOOL - ROTGR 40051327500 40051327500 40051331202 40051336804 EQUALIZING PRONGS RUNNING 49121119 49121119 4911882 4911826 PULLING 49122085 49122085 4911881 4911827 LENGTH 20.77” 20.77” 21.62” 21.88” MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102133000 4102133000 4102133430 4102133680 NIPPLE SEAL BORE SIZE 3.813” 4.125” 4.313” 4.813” ASSEMBLY NUMBER 2013131038130 2013131041230 2013131043130 2013131048130 ENGINEERING DATA MAXIMUM OD (NO-GO) 3.808” 4.120” 4.308” 4.808” LOCK MANDREL FISHING NECK ID 3.12” 3.12” 3.12” 4.00” RUNNING TOOL - ROTR 41132038100 41132041200 41132043100 41132048100 PULLING TOOL - ROTGR 40051336804 40051336804 40051336804 40051345600 EQUALIZING PRONGS RUNNING 4911762 49111012 4911640 4911943 PULLING 4911763 49111148 4911641 4911944 LENGTH 22.3” 21.9” 21.9” 23.9” MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102133810 4102134120 4102134310 4102134810 * Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision) RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

RMF Pulling Tool Assembly Pulling Tools RMF Pulling Tool Assembly RMF Pulling Tool Assembly Rebco RMF Pulling Tool is a Multi-Functional Tool design, sometimes called a 'Universal Tool'. The Tool is used to run and retrieve Wireline set devices with external Fishing Necks. Product Code: 40 REQUEST A QUOTE DOWNLOAD DATASHEET RMF Pulling Tool Assembly RMF Pulling Tool Assembly Click here Applications Retrieving external fishing neck devices in wells where the preferred release direction is uncertain Operations where both upward and downward jar release attempts may be required on the same run Reducing the risk of being unable to release from a stuck device due to commitment to a single release direction Key Benefits Only the pulling tool in the Rebco lineup can shear its release pin in either the upward or downward direction. Eliminates the need to trip out of the hole to switch between shear-up and shear-down tools when the initial release attempt fails Provides maximum operational flexibility in unpredictable or challenging wellbore conditions The Tool can be run in the Shear-Up to release or Shear-Down to release mode. Single Core can be adjusted to the desired Reach: Short, Medium or Long Reach. TECHNICAL DATA NOMINAL SIZE 2” 2 1/2” 3” ASSEMBLY NUMBER 4016202000 4016202500 4016203000 ENGINEERING DATA: MAXIMUM OD 1.86” 2.25” 2.80” PIN THREAD CONNECTION 15/16” - 10 15/16” - 10 1 1/16” - 10 FISHING NECK OD 1.375” 1.375” 1.750” BOTTOM THREAD (PRONG) 1/2” - 13 1/2” - 13 5/8” - 11 WILL ENGAGE FISHING NECK OD 1.375” 1.750” 2.313” REACH SHORT REACH 1.25” 1.30” 1.38” MEDIUM REACH 2.05” 2.10” 2.20” LONG REACH 2.60” 2.60” 2.70” LENGTH SHEAR-UP MODE 19.46” 20.25” 21.41” SHEAR-DOWN MODE 22.40” 23.63” 23.77” MATERIAL Alloy Alloy Alloy ACCESSORY: Pinning Tool Assembly 16711004 16711004 16711005 RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.