JB Junk Basket - Valve Catcher Service Tools JB Junk Basket - Valve Catcher JB Junk Basket - Valve Catcher The Rebco JB Junk Basket - Valve Catcher is engineered to be set in a No-Go type Landing Nipple, positioned directly below the Side Pocket Mandrel. It is primarily used in gas lift operations during the changeout of gas lift or dummy valves. If a valve is accidentally dropped, the Catcher securely traps it, preventing damage to the equipment below. Product Code: 163 REQUEST A QUOTE DOWNLOAD DATASHEET JB Junk Basket - Valve Catcher JB Junk Basket - Valve Catcher Click here Applications Recovering loose metallic debris, shear pin fragments, split ring pieces, and broken tool components from the wellbore Cleaning the top of a subsurface device before a pulling run to prevent debris from jamming the pulling tool Post-failure debris recovery to identify the cause of a downhole tool failure from the pieces recovered. Key Benefits Internal catch chamber securely retains collected debris throughout the retrieval trip to the surface. The flow-through body design allows wellbore fluid circulation without flushing captured debris back out. Recovered debris can be identified and analyzed to support failure investigation. Available in all standard tool string sizes and threaded connections The Junk Basket can also be installed above flow control devices to catch debris or foreign material that may fall around the system, offering added protection to the completion assembly. Product Code: 163 Norm Alloy is suitable for H 2 S Service (NACE MR-01-2 75, Latest Revision) Junk Baskets are available in other Sizes and Models not shown. Please inquire. TECHNICAL DATA NOMINAL SIZE 2 3/8” 2 7/8” 2 7/8” 3 1/2” 4 1/2” ASSEMBLY NUMBER 163070118730 163070122530 163070123130 163070127530 163070138130 NIPPLE SEAL BORE SIZE 1.875” 2.250” 2.313” 2.750’ 3.813” ENGINEERING DATA: MAXIMUM OD 1.87” 2.20” 2.30” 2.73” 3.75” ID of the BASKET 1.44’ 1.75” 1.87” 2.25’ 2.99” FISHING NECK ID 1.38” 1.81’ 1.81’ 2.31’ 3.12” LENGTH 36.0” 36.0” 36.0” 36.0” 36.0” MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORIES: PRODUCT CODE 40 RUNNING/PULLING TOOL - ROTGS 40051418700 40051423100 40051423100 40051427500 40051436804 RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

ROTTS Collar Lock Mandrel Sub-Assembly Lock Mandrels ROTTS Collar Lock Mandrel Sub-Assembly ROTTS Collar Lock Mandrel Sub-Assembly Rebco ROTTS Collar Lock Mandrel Sub-Assembly is designed to be set in API Tubing Collars. Type ROTTS Collar Lock Mandrel is basically the same as ROTS-2 Lock Mandrel Sub- Assembly (Product 10); with modified Keys to be able to locate in the Tubing Collars. Product Code: 10 REQUEST A QUOTE DOWNLOAD DATASHEET ROTTS Collar Lock Mandrel Sub-Assembly ROTTS Collar Lock Mandrel Sub-Assembly Click here Applications Selective, bidirectional locking in API tubing collars in wells without Landing Nipples, across nominal tubing sizes of 2 3/8", 2 7/8", and 3 1/2" Any application where the ROTS-2 function is required, but a machined nipple is not present in the completion string. Retrofit applications in wells where selective flow control capabilities need to be added without a nipple installation workover Key Benefits The Modified Key design allows the familiar ROTS-2 bidirectional locking function to be applied to standard API tubing collars, greatly expanding the range of wells in which selective locking is achievable. Bidirectional Dogs provide positive resistance to upward and downward movement, unlike single-direction lock designs. Functionally consistent with the ROTS-2, meaning field personnel familiar with that tool will require minimal additional training. Available across three standard nominal tubing sizes. TECHNICAL DATA RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

OK-6 Kick-Over Tool Assembly Gas Lift - Kick Over Tools OK-6 Kick-Over Tool Assembly OK-6 Kick-Over Tool Assembly The Rebco OK-6 Kickover Tool is a wireline service tool designed to install and retrieve compatible 1-in. OD side-pocket subsurface-control devices in appropriate Camco side-pocket mandrels. Used with a compatible running or pulling tool, the OK-6 uses a solid centralizer sleeve to guide and stabilize the tool assembly within the tubing while the locating and kickover components position the attached service tool at the selected side pocket. Product Code: 192 REQUEST A QUOTE DOWNLOAD DATASHEET OK-6 Kick-Over Tool Assembly OK-6 Kick-Over Tool Assembly Click here Applications Installing compatible 1-in. OD gas-lift valves and other side-pocket subsurface-control devices. Retrieving compatible 1-in. OD devices for replacement, inspection, or well servicing. Positioning an attached running or pulling tool at the selected side-pocket mandrel. Supporting wireline intervention in compatible mandrels equipped with the required orienting profile. Key Benefits Sleeve-type centralization: The solid centralizer sleeve provides an alternative method of guiding and stabilizing the tool in the tubing. Controlled pocket alignment: Locating and kickover components assist in orienting the attached service tool with the side pocket. Running and pulling capability: Supports both installation and retrieval when paired with the appropriate compatible service tool. Alternative tool configuration: Provides a centralizer arrangement different from the spring-based OK-5 design for applications where the sleeve configuration is specified. Notes Kick-over SPM Latch Running Tool Pulling Tool Pulling Spacer OK-1 KBMG KBUG BK-2 JK-2 1 ¼ in. JDS 1.66 in. SM - OK-6 OK-6 Centralizer Note: Verify that the tubing internal diameter and selected tool size are suitable for the sleeve-type centralizer configuration. Inspect the centralizer sleeve, locating finger, kick springs, and arm assembly before deployment in accordance with approved service procedures. Redress Kits Available: Rebco offers Major & Minor redress kits and replacement components for OK-6 Kickover Tools, including applicable sleeve-centralizer and kickover components. Provide the tool size and configuration to confirm the correct kit. TECHNICAL DATA NOMINAL SIZE 2 7/8” 3” 4 ½” ASSEMBLY NUMBER 192202462500 192202463000 192202464500 MAXIMUM OD 2.223” 2.500” 3.500” Tubing ID required for proper tool orientation 2.437” 2.921” 3.958” PIN THREAD CONNECTION 15/16” – 10 15/16” – 10 15/16” – 10 FISHING NECK OD 1.375” 1.375” 1.375” LENGTH 67.0” 71.125” 71.87” MATERIAL Alloy Alloy Alloy ACCESSORY: Service Tool: Type ‘ST’ for Detent Spring 5514151 RELATED TOOLS AO & AD Knuckle Joint Assembly VIEW Running Tools for Gas Lift VIEW JDS Pulling Tool (Medium Reach) Assembly VIEW OK-5 Kick-Over Tool Assembly VIEW Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

Equalizing Prong ROTPRR Plug Choke Assembly Plug Assemblies Equalizing Prong ROTPRR Plug Choke Assembly Equalizing Prong ROTPRR Plug Choke Assembly Rebco Equalizing Prong ROTPRR Plug Choke Assembly, when landed in ROTR Landing Nipple , of the same size, will plug off the nipple and tubing. The Plug Choke is capable of holding pressure differentials from above or below. NOTE: Equalizing Prong ROTPRR Plug Choke Assembly is made up of ROTR Lock Mandrel (PRODUCT CODE 10, 17, and/or 18) and ROTPR Equalizing Prong and Sub-Assembly with a Cap (PRODUCT CODE 20) . Product Code: 21 REQUEST A QUOTE DOWNLOAD DATASHEET Equalizing Prong ROTPRR Plug Choke Assembly Equalizing Prong ROTPRR Plug Choke Assembly Click here Applications Plugging and bidirectional pressure holding in ROTR Landing Nipples across seal bore sizes of 1.710" through 4.562", with larger sizes available on inquiry. Completions requiring a more positive prong-seated pressure seal than the valve-type ROTRR provides Applications where independent prong running allows the plug body to be confirmed set before the pressure-holding element is deployed, reducing the risk of a failed plug installation Large-bore and Safety Valve nipple sizes (5.875" and 5.963") available on inquiry H2S service environments requiring Norm Alloy construction Key Benefits The Equalizing Prong seated V-Packing provides a robust, mechanically positive pressure seal from both above and below, suited to demanding differential pressure applications. Running the Check Set Tool before the Prong provides a two-stage confirmation that the plug body is correctly seated before the pressure element is committed, reducing the risk of failed installations in critical wells. Equalizing Prong lengths can be custom-ordered to suit specific tool string requirements. Covers sizes up to 5.963" on inquiry, encompassing the largest completion nipple profiles in the Rebco range. Available in a variety of materials to suit downhole conditions. The Plug requires TWO runs to be set. Before Equalizing Prong is run in place, it is recommended to run a CHECK SET TOOL (ACCESSORY) . Plug Chokes are available in a variety of Materials, suitable for down-hole conditions. Norm Alloy is suitable for H 2 S Service (NACE MR-01-2 75, Latest Revision) TECHNICAL DATA NIPPLE SEAL BORE SIZE 1.710” 1.781” 1.875” 2.000” ASSEMBLY NUMBER 2111131317130 2111131317830 2111131318730 2111131320030 ENGINEERING DATA MAXIMUM OD (NO-GO) 1.705” 1.776” 1.870” 1.995” OVER ALL LENGTH 26.0” 26.0” 26.0” 26.0” RUNNING TOOL - ROTR 41132017100 41132017800 41132018700 41132020000 PULLING TOOL - ROTGR 40051315000 40051317800 40051318700 40051318700 EQUALIZING PRONGS FISHING NECK SIZE 1.187” 1.187” 1.187” 1.187” RUNNING/PULLING TOOL 4014011500 4014011500 4014011500 4014011500 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102131710 4102132000 4102132000 4102132000 NIPPLE SEAL BORE SIZE 2.125” 2.188” 2.313” 2.562” ASSEMBLY NUMBER 2111131321230 2111131321830 2111131323130 2111131325630 ENGINEERING DATA MAXIMUM OD (NO-GO) 2.120” 2.183” 2.308” 2.557” OVER ALL LENGTH 26.0” 26.56”” 26.56” 32.53” RUNNING TOOL - ROTR 41132021200 41132021800 41132023100 41132025600 PULLING TOOL - ROTGR 40051318700 40051321800 40051323100 40051323100 EQUALIZING PRONGS FISHING NECK SIZE 1.187” 1.375” 1.375” 1.375” RUNNING/PULLING TOOL 4014011500 4014012000 4014012000 4014012000 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102132000 4102132180 4102132310 4102132560 NIPPLE SEAL BORE SIZE 2.750” 2.813” 3.437” 3.688” ASSEMBLY NUMBER 2111131327530 2111131328130 2111131334330 2111131336830 ENGINEERING DATA MAXIMUM OD (NO-GO) 2.745” 2.808” 3.432” 3.683” OVER ALL LENGTH 28.13” 28.13” 28.13” 37.15” RUNNING TOOL - ROTR 41132027500 41132028100 41132034300 41132036800 PULLING TOOL - ROTGR 40051327500 40051327500 40051331202 40051336804 EQUALIZING PRONGS FISHING NECK SIZE 1.375” 1.375” 1.750” 2.313” RUNNING/PULLING TOOL 4014012000 4014012000 4014012500 4014013000 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102133000 4102133000 4102133430 4102133680 NIPPLE SEAL BORE SIZE 3.813” 4.125” 4.313” 4.562” ASSEMBLY NUMBER 2111131338130 2111131341230 2111131343130 2111131345630 ENGINEERING DATA MAXIMUM OD (NO-GO) 3.808” 4.120” 4.308” 4.557” OVER ALL LENGTH 37.38" 38.1" 38.61" 38.6” RUNNING TOOL - ROTR 41132038100 41132041200 41132043100 41132045600 PULLING TOOL - ROTGR 40051336804 40051336804 40051336804 40051345600 EQUALIZING PRONGS FISHING NECK SIZE 2.313” 2.313” 3.125” 3.125” RUNNING/PULLING TOOL 4014013000 4014013000 4014014000 4014014000 MATERIAL * Norm Alloy Norm Alloy Norm Alloy Norm Alloy ACCESSORY ( PRODUCT CODE 41) : CHECK SET TOOL 4102133810 4102134120 4102134310 4102134560 * Norm Alloy is suitable for H2S Service (NACE MR-01-75, Latest Revision) RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

ROTRNS Soft Set Bomb (Instrument) Hanger Assembly 'BHP' Instrument Hangers ROTRNS Soft Set Bomb (Instrument) Hanger Assembly ROTRNS Soft Set Bomb (Instrument) Hanger Assembly Rebco ROTRNS Soft Set Bomb (Instrument) Hanger is designed to set Instruments into ROTR & ROTRN Landing Nipples of the same size. The Soft Set Bomb (Instrument) Hanger does not require jarring to be set into the Landing Nipple. Two types of Running Tools are offered: Hydraulic or Mechanical. The choice is determined by the Operator or the Well conditions. Product Code: 33 REQUEST A QUOTE DOWNLOAD DATASHEET ROTRNS Soft Set Bomb (Instrument) Hanger Assembly ROTRNS Soft Set Bomb (Instrument) Hanger Assembly Click here Applications Deploying shock-sensitive electronic or precision mechanical recording instruments that cannot tolerate jar-down set impacts ROTR and ROTRN Landing Nipple installations where a soft, controlled setting method is required High-value instrument deployments where the risk of instrument damage from jarring is unacceptable Key Benefits Jar-free soft setting protects sensitive recording instruments from the shock loads associated with conventional hanger setting. Choice of hydraulic (ROTHR) or mechanical (ROTMR) running tool provides flexibility based on well conditions ROTGR Pulling Tool with matched Pulling Prong provides a complete, dedicated retrieval solution NACE MR-01-75 alloy construction standard across all sizes for sour service compatibility Available in non-standard sizes and materials upon request Material - Norm Alloy (NACE MR-01-75, 1980 Rev.) NOTE: Rebco ROTRNS Instrument Hangers are available in Sizes not shown and variety of Materials suitable for the Well Conditions. TECHNICAL DATA NOM SIZE SEAL BORE SIZE ASS'Y NUMBER 3/4-10_=0 '5/8' SR_=0 RUNNING TOOL PULING TOOL PULLING PRONG HYDRAULIC MECHANICAL Type 'ROTHR' Type 'ROTMR' Type 'ROTGR' 2 3/8” 1.875” 331310141873_ 4106132000 4109131870 40051318700 49111211 2.125” 331310142123_ 2 7/8” 2.188” 331310142183_ 4106132500 4109132310 40051321800 49111212 2.313” 331310142313_ 40051323100 3 1/2” 2.562” 331310142563_ 4106132500 4109132310 40051323100 49111212 2.750” 331310142753_ 4106132000 4109132750 40051327500 49111213 2.813” 331310142813_ 4106132000 4 1/2” 3.688” 331310143683_ 4106133500 4109133500 40051331202 49111380 3.813” 331310143813_ 4106134500 4109134500 40051336804 49111231 RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

CX Check Set Tool Assembly Service Tools CX Check Set Tool Assembly CX Check Set Tool Assembly The Rebco CX Check Set Tool is engineered to verify the proper setting of ROTX and ROTXN Lock Mandrels within their corresponding Landing Nipple profiles. This tool ensures accurate placement and secure locking before proceeding with further operations. Product Code: 41 REQUEST A QUOTE DOWNLOAD DATASHEET CX Check Set Tool Assembly CX Check Set Tool Assembly Click here Applications Confirming the correct set position and load resistance of lock mandrels and downhole controls after wireline setting operations Verifying that a device will not shift under production loading before the workover or wireline unit is released from the well Troubleshooting suspected partial sets without pulling the device to the surface Key Benefits Provides direct in-situ confirmation of correct set position, eliminates uncertainty without a pull run. CX (downstroke check) and CR (upstroke check) together verify device integrity in both load directions. Available in all standard tool string sizes TECHNICAL DATA NOMINAL SIZE 2” 2 1/2” 3” 3 1/2” 4 1/2” 5 1/2” For LOCK MANDREL SIZE 1.875” 2.313” 2.75”-2.87” 3.313” 3.813” 4.562” ASSEMBLY NUMBER 4102181870 4102182310 4102183000 4102183310 4102183810 4102184560 ENGINEERING DATA: MAXIMUM OD 1.81” 2.25” 2.72” 3.25” 3.75” 4.50” PIN THREAD CONNECTION 15/16” - 10 15/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 1 1/16” - 10 FISHING NECK OD 1.375” 1.750” 2.313” 2.313” 2.313” 2.313” LENGTH 14.63” 14.88” 15.04” 15.80” 16.14” 16.95” MATERIAL Alloy Alloy Alloy Alloy Alloy Alloy RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

L-2D Kick-Over Tool Assembly Gas Lift - Kick Over Tools L-2D Kick-Over Tool Assembly L-2D Kick-Over Tool Assembly The Rebco L-2D Series Kickover Tool is a wireline service tool designed to install and retrieve compatible 1-in. and 1½-in. outside-diameter side-pocket subsurface-control devices in compatible Camco KBM and MM series side-pocket mandrels. Used with the appropriate running or pulling tool, the L-2D assembly uses locating and locking components to orient the tool string at the selected mandrel pocket. Spring-loaded centering arms help maintain alignment during the kickover sequence, positioning the attached service tool for controlled device installation or retrieval. Product Code: 194 REQUEST A QUOTE DOWNLOAD DATASHEET L-2D Kick-Over Tool Assembly L-2D Kick-Over Tool Assembly Click here Applications Install compatible 1-in. and 1½-in. OD side-pocket subsurface-control devices in approved side-pocket mandrels. Retrieve installed retrievable devices for replacement, inspection, or corrective well servicing. Position compatible running tools for deploying approved gas-lift valves, dummy valves, and other side-pocket flow-control devices. Position compatible pulling tools for removal of installed devices from the selected mandrel pocket. Key Benefits Accurate pocket positioning: The locating finger and spring-loaded centering arms help align the attached service tool with the selected side-pocket location. One tool for running and pulling: When configured with the appropriate compatible running or pulling tool, the L-2D supports both device installation and retrieval. Controlled kickover action: Locking dogs help hold the barrel assembly in the intended position while the service tool is moved into alignment with the mandrel pocket. Efficient device replacement: Supports wireline replacement of compatible retrievable devices, limiting the need for tubing-pulling work when the well configuration and operating procedure permit. Notes Note Disclaimer: The L-2D Kickover Tool must be used with the appropriate compatible running or pulling tool. Device, mandrel, spacer-bar, and tool-string compatibility must be confirmed for the intended application. Available in 2 - 2 ½” to 3” Kick-over SPM Latch Running Tool Pulling Tool Pulling Spacer L-2D MMG RK RK-1 1 ⅝ in. JDS + Core extension 1 ½ in. SB 4 ¾ in. Redress Kits Available: Rebco offers Major & Minor redress kits and replacement components for L-2D Series Kickover Tools, including applicable locating, centering, locking, and kickover components. Provide the tool model and size to confirm the correct kit. TECHNICAL DATA NOMINAL SIZE 2” - 2 1/2” 3” ASSEMBLY NUMBER 194082032250 194082033000 KICK OVER TOOL TYPE L-2D L-2D PIN THREAD CONNECTION 15/16” – 10 15/16” – 10 FISHING NECK OD 1.187” 1.187” LENGTH 21” 21” MATERIAL Alloy Alloy RELATED TOOLS Running Tools for Gas Lift VIEW JDS Pulling Tool (Medium Reach) Assembly VIEW L Kick-Over Tool Assembly VIEW Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

RC Rope Socket Assembly Tool String RC Rope Socket Assembly RC Rope Socket Assembly Rebco RC Rope Socket is designed to connect a Capsulated Line to the Tool String. The wear bushing and swivel design, prevent damage to the wire. The Capsulated Line is inserted through the wear bushing, and the Body. The clamp is tightened to the line and pulled into the Rope Socket. A connector sub is slipped over the bottom sub, a retainer is screwed and secured by a set screw. The bottom sub and the connector sub are made up to the Body. Product Code: 100 REQUEST A QUOTE DOWNLOAD DATASHEET RC Rope Socket Assembly RC Rope Socket Assembly Click here Applications Connecting the capsulated/flatpack cable to the tool string Operations where standard knot or wedge terminations are not suitable for the line type Key Benefits Clamp design accommodates a capsulated line that cannot be tied or wedged Integrated wear bushing protects the cable jacket from mechanical damage Built-in swivel prevents torsional stress transmission into the cable Alloy Material is used to manufacture Rebco ROPE SOCKETS. Materials suitable for specific well conditions are available. Must be ordered by Wire Size in use. Sizes not listed are also available, please enquire. TECHNICAL DATA NOMINAL SIZE ASSEMBLY NO. FISH NECK OD MAX OD BOX THD CONNECTION FOR CABLE SIZE LENGTH 1 1/2” 100130215001 1.375” 1.50” 15/16” – 10 Pin 1/8” 7.285” 1 1/2” 100130215002 1.375” 1.50” 1/4” 1/8” 7.285” RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

DSD Double Shear Down Adapter Sub-Assembly Pulling Tools DSD Double Shear Down Adapter Sub-Assembly DSD Double Shear Down Adapter Sub-Assembly Rebco DSD Double Shear Down Adapter Sub-Assembly is designed to be used with Rebco S (Shear Down) Pulling Tools. The Adapter allows the Pulling Tools to function as before with the exception that the Tools can be released by jarring down on either the Core or the Cylinder of the Pulling Tools. Moreover, the Short Core in the Pulling Tool increases the reach. Product Code: 40 REQUEST A QUOTE DOWNLOAD DATASHEET DSD Double Shear Down Adapter Sub-Assembly DSD Double Shear Down Adapter Sub-Assembly Click here TECHNICAL DATA NOMINAL SIZE 2” 2 1/2” 3” SUB-ASSEMBLY NUMBER 4014202000 4014202500 4014203000 ENGINEERING DATA: MAXIMUM OD 1.75” 2.18” 2.75” PIN THREAD CONNECTION 15/16” - 10 15/16” - 10 1 1/16” - 10 FISHING NECK OD 1.375” 1.750” 2.313” BOTTOM THREAD 1 3/8” - 12 1 3/4” - 12 2 1/8” - 12 LENGTH 8.1” 8.3” 8.7” MATERIAL Alloy Alloy Alloy RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.

GRL Pulling Tool Assembly Pulling Tools GRL Pulling Tool Assembly GRL Pulling Tool Assembly Rebco GRL Pulling Tool is a combination tool made up of the GSL Pulling Tool and GU Shear-Up Adapter. Product Code: 40 REQUEST A QUOTE DOWNLOAD DATASHEET GRL Pulling Tool Assembly GRL Pulling Tool Assembly Click here Applications GR-profile internal fishing neck retrieval, where the standard GR reach is confirmed to be insufficient Instrument hanger configurations with the internal fishing neck positioned deeper than the GR can access Key Benefits Long-reach core extends full GR family compatibility to deeply recessed internal fishing necks. Identical operating procedure to the GR, no retraining required Available for the same instrument hanger families as the GR TECHNICAL DATA NOMINAL SIZE 2” 2 1/2” 3” 4” ASSEMBLY NUMBER 4005130818700 4005130821800 4005130827500 4005130836804 ENGINEERING DATA: MAXIMUM OD 1.81” 2.16” 2.72” 3.62” PIN THREAD CONNECTION 15/16” - 10 15/16” - 10 1 1/16” - 10 1 1/16” - 10 FISHING NECK OD 1.375” 1.750” 2.313” 2.313” WILL ENGAGE FISHING NECK ID 1.38” 1.81” 2.31” 3.12” LENGTH 20.4” 20.9” 21.4” 22.7” MATERIAL Alloy Alloy Alloy Alloy RELATED TOOLS Disclaimer: Information is provided for reference only. Rebco Oil Tools, Inc. makes no express or implied warranty as to the accuracy or completeness of this information. Equipment selection, configuration, and use must be performed by qualified personnel and are subject to approved procedures, well conditions, mechanical limitations, and Rebco’s Terms and Conditions of Sale.